From: Jean-François Moine Date: Mon, 23 May 2011 08:38:10 +0000 (-0300) Subject: [media] gspca - ov519: New sensor ov9600 with bridge ovfx2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=798ae1501d7a27faf017cc0d78543417c19d7af3;p=linux-beck.git [media] gspca - ov519: New sensor ov9600 with bridge ovfx2 This sensor was found in a webcam 8020:ef04 (SVC - SVU2-1.3MV PCCam). Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 057e287b9152..cb42a5182d17 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -134,6 +134,7 @@ enum sensors { SEN_OV7670, SEN_OV76BE, SEN_OV8610, + SEN_OV9600, }; /* Note this is a bit of a hack, but the w9968cf driver needs the code for all @@ -340,6 +341,10 @@ static const unsigned ctrl_dis[] = { (1 << EXPOSURE) | (1 << AUTOGAIN) | (1 << FREQ), +[SEN_OV9600] = ((1 << NCTRL) - 1) /* no control */ + ^ ((1 << EXPOSURE) /* but exposure */ + | (1 << AUTOGAIN)), /* and autogain */ + }; static const struct v4l2_pix_format ov519_vga_mode[] = { @@ -525,6 +530,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; +static const struct v4l2_pix_format ovfx2_ov9600_mode[] = { + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 1024, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; /* Registers common to OV511 / OV518 */ #define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ @@ -1807,6 +1823,22 @@ static const struct ov_i2c_regvals norm_7660[] = { | OV7670_COM8_AEC}, {0xa1, 0xc8} }; +static const struct ov_i2c_regvals norm_9600[] = { + {0x12, 0x80}, + {0x0c, 0x28}, + {0x11, 0x80}, + {0x13, 0xb5}, + {0x14, 0x3e}, + {0x1b, 0x04}, + {0x24, 0xb0}, + {0x25, 0x90}, + {0x26, 0x94}, + {0x35, 0x90}, + {0x37, 0x07}, + {0x38, 0x08}, + {0x01, 0x8e}, + {0x02, 0x85} +}; /* 7670. Defaults taken from OmniVision provided data, * as provided by Jonathan Corbet of OLPC */ @@ -2686,7 +2718,7 @@ static void write_i2c_regvals(struct sd *sd, * ***************************************************************************/ -/* This initializes the OV2x10 / OV3610 / OV3620 */ +/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */ static void ov_hires_configure(struct sd *sd) { int high, low; @@ -2702,19 +2734,32 @@ static void ov_hires_configure(struct sd *sd) high = i2c_r(sd, 0x0a); low = i2c_r(sd, 0x0b); /* info("%x, %x", high, low); */ - if (high == 0x96 && low == 0x40) { - PDEBUG(D_PROBE, "Sensor is an OV2610"); - sd->sensor = SEN_OV2610; - } else if (high == 0x96 && low == 0x41) { - PDEBUG(D_PROBE, "Sensor is an OV2610AE"); - sd->sensor = SEN_OV2610AE; - } else if (high == 0x36 && (low & 0x0f) == 0x00) { - PDEBUG(D_PROBE, "Sensor is an OV3610"); - sd->sensor = SEN_OV3610; - } else { - err("Error unknown sensor type: %02x%02x", - high, low); + switch (high) { + case 0x96: + switch (low) { + case 0x40: + PDEBUG(D_PROBE, "Sensor is a OV2610"); + sd->sensor = SEN_OV2610; + return; + case 0x41: + PDEBUG(D_PROBE, "Sensor is a OV2610AE"); + sd->sensor = SEN_OV2610AE; + return; + case 0xb1: + PDEBUG(D_PROBE, "Sensor is a OV9600"); + sd->sensor = SEN_OV9600; + return; + } + break; + case 0x36: + if ((low & 0x0f) == 0x00) { + PDEBUG(D_PROBE, "Sensor is a OV3610"); + sd->sensor = SEN_OV3610; + return; + } + break; } + err("Error unknown sensor type: %02x%02x", high, low); } /* This initializes the OV8110, OV8610 sensor. The OV8110 uses @@ -3400,6 +3445,10 @@ static int sd_init(struct gspca_dev *gspca_dev) cam->cam_mode = ovfx2_ov3610_mode; cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode); break; + case SEN_OV9600: + cam->cam_mode = ovfx2_ov9600_mode; + cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode); + break; default: if (sd->sif) { cam->cam_mode = ov519_sif_mode; @@ -3497,6 +3546,12 @@ static int sd_init(struct gspca_dev *gspca_dev) case SEN_OV8610: write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)); break; + case SEN_OV9600: + write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600)); + + /* enable autoexpo */ +/* i2c_w_mask(sd, 0x13, 0x05, 0x05); */ + break; } return gspca_dev->usb_err; error: @@ -4085,6 +4140,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; + case SEN_OV9600: { + const struct ov_i2c_regvals *vals; + static const struct ov_i2c_regvals sxga_15[] = { + {0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals sxga_7_5[] = { + {0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals vga_30[] = { + {0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60} + }; + static const struct ov_i2c_regvals vga_15[] = { + {0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70} + }; + + /* frame rates: + * 15fps / 7.5 fps for 1280x1024 + * 30fps / 15fps for 640x480 + */ + i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40); + if (qvga) + vals = sd->frame_rate < 30 ? vga_15 : vga_30; + else + vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15; + write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15)); + return; + } default: return; } @@ -4120,6 +4202,7 @@ static void set_ov_sensor_window(struct sd *sd) case SEN_OV2610AE: case SEN_OV3610: case SEN_OV7670: + case SEN_OV9600: mode_init_ov_sensor_regs(sd); return; case SEN_OV7660: