From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 10 Oct 2012 08:38:26 +0000 (+0100)
Subject: ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=79b1c9e69de27813c7b270b1fbe0880c7b537def;p=linux-beck.git

ARM: ux500: Enable all MMC devices on the u9540 when booting with DT

The u9540 supports 3 MMC devices. This patch enables two of them
and updates the configuration of the already enabled SDI4 port.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---

diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
index 2dade76321f3..95892ec6c342 100644
--- a/arch/arm/boot/dts/u9540.dts
+++ b/arch/arm/boot/dts/u9540.dts
@@ -33,10 +33,35 @@
 			status = "okay";
 		};
 
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;