From: Huang Shijie <b32955@freescale.com>
Date: Wed, 25 Sep 2013 06:58:15 +0000 (+0800)
Subject: mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7a2b89acf8edbff462fa6e1fc6100c5dc85364ed;p=linux-beck.git

mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2

When we use the ECC info which is get from the nand chip's datasheet,
we may have some freed oob area now.

This patch rewrites the gpmi_ecc_write_oob() to implement the ecc.write_oob().
We also update the comment for gpmi_hw_ecclayout.

Yes! We can support the JFFS2 for the SLC nand now.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 10a092dbaa71..37508eb350d0 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -45,7 +45,10 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
 	.pattern	= scan_ff_pattern
 };
 
-/*  We will use all the (page + OOB). */
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
 static struct nand_ecclayout gpmi_hw_ecclayout = {
 	.eccbytes = 0,
 	.eccpos = { 0, },
@@ -1263,14 +1266,22 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 static int
 gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
-	/*
-	 * The BCH will use all the (page + oob).
-	 * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
-	 * But it can not stop some ioctls such MEMWRITEOOB which uses
-	 * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
-	 * these ioctls too.
-	 */
-	return -EPERM;
+	struct nand_oobfree *of = mtd->ecclayout->oobfree;
+	int status = 0;
+
+	/* Do we have available oob area? */
+	if (!of->length)
+		return -EPERM;
+
+	if (!nand_is_slc(chip))
+		return -EPERM;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+	chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
 }
 
 static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)