From: Maxime COQUELIN Date: Fri, 20 Jun 2014 11:34:54 +0000 (+0200) Subject: pinctrl: st: Fix irqmux handler X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7a2deccf0ef12f7f6e33150d5875020c0c94fa94;p=linux-beck.git pinctrl: st: Fix irqmux handler st_gpio_irqmux_handler() reads the status register to find out which banks inside the controller have pending IRQs. For each banks having pending IRQs, it calls the corresponding handler. Problem is that current code restricts the number of possible banks inside the controller to ST_GPIO_PINS_PER_BANK. This define represents the number of pins inside a bank, so it shouldn't be used here. On STiH407, PIO_FRONT0 controller has 10 banks, so IRQs pending in the two last banks (PIO18 & PIO19) aren't handled. This patch replace ST_GPIO_PINS_PER_BANK by the number of banks inside the controller. Cc: Linus Walleij Cc: #v3.15+ Acked-by: Srinivas Kandagatla Signed-off-by: Maxime Coquelin Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 1bd6363bc95e..9f43916637ca 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1431,7 +1431,7 @@ static void st_gpio_irqmux_handler(unsigned irq, struct irq_desc *desc) status = readl(info->irqmux_base); - for_each_set_bit(n, &status, ST_GPIO_PINS_PER_BANK) + for_each_set_bit(n, &status, info->nbanks) __gpio_irq_handler(&info->banks[n]); chained_irq_exit(chip, desc);