From: Ranjith Lohithakshan Date: Sat, 8 May 2010 07:09:21 +0000 (+0530) Subject: OMAP3: PM: Enable wakeup from ads7846 touchscreen X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7a44ad2fce65ed2811ebef4adbc38bcc82cd44a7;p=linux-beck.git OMAP3: PM: Enable wakeup from ads7846 touchscreen This patch enables the wakeup capabilities of ads7846 touchscreen driver. ads7846 driver can now wakeup the system from suspend on OMAP3430 EVM and SDP boards. The earlier approach of enabling wakeup on the touchscreen GPIO pin during board level mux init is removed. Instead the wakeup flag in ads7846_platform_data is enabled. Based on the flag, the ads7846 driver will do an enable_irq_wake which will eventually call into the OMAP GPIO layer and will enable the wakeup capability on the GPIO pin. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5822bcf7b15f..e7d629b3c76a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -150,6 +150,7 @@ static int ads7846_get_pendown_state(void) static struct ads7846_platform_data tsc2046_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, + .wakeup = true, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3548fb859123..cfbe695103d0 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -600,6 +600,7 @@ struct ads7846_platform_data ads7846_config = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, .settle_delay_usecs = 150, + .wakeup = true, }; static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -654,8 +655,7 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | - OMAP_PIN_OFF_WAKEUPENABLE), + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else