From: Jarkko Nikula Date: Thu, 4 Feb 2016 10:30:57 +0000 (+0200) Subject: spi: pxa2xx: Fix too early chipselect deassert X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7a8d44bc89e5cddcd5c0704a11a90484d36ba6ba;p=linux-beck.git spi: pxa2xx: Fix too early chipselect deassert There is a chance that chipselect is deasserted too early while the last clock cycle is still running. Protocol analyzers will see this as a failed last byte. This is more likely to occur with slow bitrates, for instance at 25 kbps. Reason for this is when using SPI mode 0 that both SPI host controller and SPI slave will drive the data lines at the falling edge of clock signal and sample at the rising edge. Receive FIFO gets the last bit now at the rising edge and code sees transfer to be finished either by the interrupt in PIO mode or by the DMA completion in DMA mode. The SSP Time Out register SSTO should take care of delaying the completion but it does not seems to have effect at least on Intel Skylake and Broxton even when using long enough values. Depending on timing code may get into point where chipselect is deasserted while the last clock cycle is still running at its second half cycle. Fix this by adding a wait loop in giveback() that waits until SSP becomes idle before deasserting the chipselect. Reported-by: Weifeng Voon Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 9b9a528a9fbd..ce66cf44bba5 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -496,6 +496,7 @@ static void giveback(struct driver_data *drv_data) { struct spi_transfer* last_transfer; struct spi_message *msg; + unsigned long timeout; msg = drv_data->cur_msg; drv_data->cur_msg = NULL; @@ -508,6 +509,12 @@ static void giveback(struct driver_data *drv_data) if (last_transfer->delay_usecs) udelay(last_transfer->delay_usecs); + /* Wait until SSP becomes idle before deasserting the CS */ + timeout = jiffies + msecs_to_jiffies(10); + while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY && + !time_after(jiffies, timeout)) + cpu_relax(); + /* Drop chip select UNLESS cs_change is true or we are returning * a message with an error, or next message is for another chip */