From: James Smart Date: Thu, 3 Jan 2013 20:43:29 +0000 (-0500) Subject: [SCSI] lpfc 8.3.37: Removed use of NOP mailboxes for interrupt verification X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7b15db32d3a585e5f7e304b4728b29daa534e039;p=linux-beck.git [SCSI] lpfc 8.3.37: Removed use of NOP mailboxes for interrupt verification Removed use of NOP mailboxes for interrupt verification in pci_probe_one_s4 Signed-off-by: James Smart Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 89ad55807012..5262049651ee 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7663,78 +7663,6 @@ out: return rc; } -/** - * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands - * @phba: pointer to lpfc hba data structure. - * @cnt: number of nop mailbox commands to send. - * - * This routine is invoked to send a number @cnt of NOP mailbox command and - * wait for each command to complete. - * - * Return: the number of NOP mailbox command completed. - **/ -static int -lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt) -{ - LPFC_MBOXQ_t *mboxq; - int length, cmdsent; - uint32_t mbox_tmo; - uint32_t rc = 0; - uint32_t shdr_status, shdr_add_status; - union lpfc_sli4_cfg_shdr *shdr; - - if (cnt == 0) { - lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, - "2518 Requested to send 0 NOP mailbox cmd\n"); - return cnt; - } - - mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mboxq) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2519 Unable to allocate memory for issuing " - "NOP mailbox command\n"); - return 0; - } - - /* Set up NOP SLI4_CONFIG mailbox-ioctl command */ - length = (sizeof(struct lpfc_mbx_nop) - - sizeof(struct lpfc_sli4_cfg_mhdr)); - - for (cmdsent = 0; cmdsent < cnt; cmdsent++) { - lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, - LPFC_MBOX_OPCODE_NOP, length, - LPFC_SLI4_MBX_EMBED); - if (!phba->sli4_hba.intr_enable) - rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); - else { - mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq); - rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo); - } - if (rc == MBX_TIMEOUT) - break; - /* Check return status */ - shdr = (union lpfc_sli4_cfg_shdr *) - &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; - shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); - shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, - &shdr->response); - if (shdr_status || shdr_add_status || rc) { - lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, - "2520 NOP mailbox command failed " - "status x%x add_status x%x mbx " - "status x%x\n", shdr_status, - shdr_add_status, rc); - break; - } - } - - if (rc != MBX_TIMEOUT) - mempool_free(mboxq, phba->mbox_mem_pool); - - return cmdsent; -} - /** * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space. * @phba: pointer to lpfc hba data structure. @@ -8502,37 +8430,6 @@ lpfc_unset_hba(struct lpfc_hba *phba) return; } -/** - * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization. - * @phba: pointer to lpfc hba data structure. - * - * This routine is invoked to unset the HBA device initialization steps to - * a device with SLI-4 interface spec. - **/ -static void -lpfc_sli4_unset_hba(struct lpfc_hba *phba) -{ - struct lpfc_vport *vport = phba->pport; - struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - - spin_lock_irq(shost->host_lock); - vport->load_flag |= FC_UNLOADING; - spin_unlock_irq(shost->host_lock); - - phba->pport->work_port_events = 0; - - /* Stop the SLI4 device port */ - lpfc_stop_port(phba); - - lpfc_sli4_disable_intr(phba); - - /* Reset SLI4 HBA FCoE function */ - lpfc_pci_function_reset(phba); - lpfc_sli4_queue_destroy(phba); - - return; -} - /** * lpfc_sli4_xri_exchange_busy_wait - Wait for device XRI exchange busy * @phba: Pointer to HBA context object. @@ -9595,7 +9492,6 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) struct Scsi_Host *shost = NULL; int error, ret; uint32_t cfg_mode, intr_mode; - int mcnt; int adjusted_fcp_io_channel; /* Allocate memory for HBA structure */ @@ -9684,58 +9580,35 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */ /* Now, trying to enable interrupt and bring up the device */ cfg_mode = phba->cfg_use_msi; - while (true) { - /* Put device to a known state before enabling interrupt */ - lpfc_stop_port(phba); - /* Configure and enable interrupt */ - intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode); - if (intr_mode == LPFC_INTR_ERROR) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0426 Failed to enable interrupt.\n"); - error = -ENODEV; - goto out_free_sysfs_attr; - } - /* Default to single EQ for non-MSI-X */ - if (phba->intr_type != MSIX) - adjusted_fcp_io_channel = 1; - else - adjusted_fcp_io_channel = phba->cfg_fcp_io_channel; - phba->cfg_fcp_io_channel = adjusted_fcp_io_channel; - /* Set up SLI-4 HBA */ - if (lpfc_sli4_hba_setup(phba)) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "1421 Failed to set up hba\n"); - error = -ENODEV; - goto out_disable_intr; - } - - /* Send NOP mbx cmds for non-INTx mode active interrupt test */ - if (intr_mode != 0) - mcnt = lpfc_sli4_send_nop_mbox_cmds(phba, - LPFC_ACT_INTR_CNT); - /* Check active interrupts received only for MSI/MSI-X */ - if (intr_mode == 0 || - phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) { - /* Log the current active interrupt mode */ - phba->intr_mode = intr_mode; - lpfc_log_intr_mode(phba, intr_mode); - break; - } - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0451 Configure interrupt mode (%d) " - "failed active interrupt test.\n", - intr_mode); - /* Unset the previous SLI-4 HBA setup. */ - /* - * TODO: Is this operation compatible with IF TYPE 2 - * devices? All port state is deleted and cleared. - */ - lpfc_sli4_unset_hba(phba); - /* Try next level of interrupt mode */ - cfg_mode = --intr_mode; + /* Put device to a known state before enabling interrupt */ + lpfc_stop_port(phba); + /* Configure and enable interrupt */ + intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0426 Failed to enable interrupt.\n"); + error = -ENODEV; + goto out_free_sysfs_attr; + } + /* Default to single EQ for non-MSI-X */ + if (phba->intr_type != MSIX) + adjusted_fcp_io_channel = 1; + else + adjusted_fcp_io_channel = phba->cfg_fcp_io_channel; + phba->cfg_fcp_io_channel = adjusted_fcp_io_channel; + /* Set up SLI-4 HBA */ + if (lpfc_sli4_hba_setup(phba)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1421 Failed to set up hba\n"); + error = -ENODEV; + goto out_disable_intr; } + /* Log the current active interrupt mode */ + phba->intr_mode = intr_mode; + lpfc_log_intr_mode(phba, intr_mode); + /* Perform post initialization setup */ lpfc_post_init_setup(phba);