From: Joe Perches Date: Sat, 13 Sep 2014 18:31:18 +0000 (-0700) Subject: arm: mach-pxa: Convert pr_warning to pr_warn X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7b472ac75689af196d868b3f2322edb44b8096d3;p=linux-beck.git arm: mach-pxa: Convert pr_warning to pr_warn Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches Signed-off-by: Robert Jarzmik --- diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 6915a9f6b3a3..51531ecffca8 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -378,7 +378,7 @@ static void __init em_x270_init_nand(void) err = gpio_request(GPIO11_NAND_CS, "NAND CS"); if (err) { - pr_warning("EM-X270: failed to request NAND CS gpio\n"); + pr_warn("EM-X270: failed to request NAND CS gpio\n"); return; } @@ -386,7 +386,7 @@ static void __init em_x270_init_nand(void) err = gpio_request(nand_rb, "NAND R/B"); if (err) { - pr_warning("EM-X270: failed to request NAND R/B gpio\n"); + pr_warn("EM-X270: failed to request NAND R/B gpio\n"); gpio_free(GPIO11_NAND_CS); return; } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 00b92dad7b81..f6c76a3ee3b2 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -140,8 +140,7 @@ static void gumstix_setup_bt_clock(void) int timeout = 500; if (!(OSCC & OSCC_OOK)) - pr_warning("32kHz clock was not on. Bootloader may need to " - "be updated\n"); + pr_warn("32kHz clock was not on. Bootloader may need to be updated\n"); else return; diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index ef0426a159d4..666b78972c40 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -93,8 +93,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) break; default: /* warning and fall through, treat as MFP_LPM_DEFAULT */ - pr_warning("%s: GPIO%d: unsupported low power mode\n", - __func__, gpio); + pr_warn("%s: GPIO%d: unsupported low power mode\n", + __func__, gpio); break; } @@ -107,14 +107,12 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) * configurations of those pins not able to wakeup */ if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) { - pr_warning("%s: GPIO%d unable to wakeup\n", - __func__, gpio); + pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio); return -EINVAL; } if ((c & MFP_LPM_CAN_WAKEUP) && is_out) { - pr_warning("%s: output GPIO%d unable to wakeup\n", - __func__, gpio); + pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio); return -EINVAL; } @@ -126,7 +124,7 @@ static inline int __mfp_validate(int mfp) int gpio = mfp_to_gpio(mfp); if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) { - pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio); + pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio); return -1; } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 131991629116..29019beae591 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -446,7 +446,7 @@ static void __init poodle_init(void) ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) - pr_warning("poodle: Unable to register LoCoMo device\n"); + pr_warn("poodle: Unable to register LoCoMo device\n"); pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index e329ccefd364..614003e8b081 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -74,7 +74,7 @@ static int pxa310_ulpi_poll(void) cpu_relax(); } - pr_warning("%s: ULPI access timed out!\n", __func__); + pr_warn("%s: ULPI access timed out!\n", __func__); return -ETIMEDOUT; } @@ -84,7 +84,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg) int err; if (pxa310_ulpi_get_phymode() != SYNCH) { - pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); + pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); return -EBUSY; } @@ -101,7 +101,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg) static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg) { if (pxa310_ulpi_get_phymode() != SYNCH) { - pr_warning("%s: PHY is not in SYNCH mode!\n", __func__); + pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); return -EBUSY; } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8386dc30b3e4..a762b23ac830 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -521,7 +521,7 @@ static void __init raumfeld_w1_init(void) "W1 external pullup enable"); if (ret < 0) - pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n"); + pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n"); else gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); @@ -600,7 +600,7 @@ static void __init raumfeld_lcd_init(void) ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) - pr_warning("Unable to request GPIO_TFT_VA_EN\n"); + pr_warn("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); @@ -608,7 +608,7 @@ static void __init raumfeld_lcd_init(void) ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) - pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); + pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); @@ -814,17 +814,17 @@ static void __init raumfeld_power_init(void) /* Set PEN2 high to enable maximum charge current */ ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2"); if (ret < 0) - pr_warning("Unable to request GPIO_CHRG_PEN2\n"); + pr_warn("Unable to request GPIO_CHRG_PEN2\n"); else gpio_direction_output(GPIO_CHRG_PEN2, 1); ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK"); if (ret < 0) - pr_warning("Unable to request GPIO_CHARGE_DC_OK\n"); + pr_warn("Unable to request GPIO_CHARGE_DC_OK\n"); ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP"); if (ret < 0) - pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n"); + pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n"); else gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0); @@ -976,19 +976,19 @@ static void __init raumfeld_audio_init(void) ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset"); if (ret < 0) - pr_warning("unable to request GPIO_CODEC_RESET\n"); + pr_warn("unable to request GPIO_CODEC_RESET\n"); else gpio_direction_output(GPIO_CODEC_RESET, 1); ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset"); if (ret < 0) - pr_warning("unable to request GPIO_SPDIF_RESET\n"); + pr_warn("unable to request GPIO_SPDIF_RESET\n"); else gpio_direction_output(GPIO_SPDIF_RESET, 1); ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset"); if (ret < 0) - pr_warning("unable to request GPIO_MCLK_RESET\n"); + pr_warn("unable to request GPIO_MCLK_RESET\n"); else gpio_direction_output(GPIO_MCLK_RESET, 1); @@ -1019,20 +1019,20 @@ static void __init raumfeld_common_init(void) ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset"); if (ret < 0) - pr_warning("Unable to request GPIO_W2W_RESET\n"); + pr_warn("Unable to request GPIO_W2W_RESET\n"); else gpio_direction_output(GPIO_W2W_RESET, 0); ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup"); if (ret < 0) - pr_warning("Unable to request GPIO_W2W_PDN\n"); + pr_warn("Unable to request GPIO_W2W_PDN\n"); else gpio_direction_output(GPIO_W2W_PDN, 0); /* this can be used to switch off the device */ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); if (ret < 0) - pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); + pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); else gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); @@ -1051,7 +1051,7 @@ static void __init raumfeld_controller_init(void) ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); if (ret < 0) - pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n"); + pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n"); else gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);