From: David Brown Date: Fri, 7 Sep 2012 21:45:03 +0000 (-0700) Subject: msm_serial: fix clock rate on DMA-based uarts X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7b6031a7bcf3b191cf02caa2be6939df9266db40;p=linux-beck.git msm_serial: fix clock rate on DMA-based uarts The driver explicitly requests a clock rate for the UART, but it is off by a factor of four from the dividers that it programs into the UART. Fix this by setting the rate to 1/4 of the current value. Signed-off-by: David Brown Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 8131e2c28015..033e0bc9ebab 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -896,7 +896,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) return PTR_ERR(msm_port->clk); if (msm_port->is_uartdm) - clk_set_rate(msm_port->clk, 7372800); + clk_set_rate(msm_port->clk, 1843200); port->uartclk = clk_get_rate(msm_port->clk); printk(KERN_INFO "uartclk = %d\n", port->uartclk);