From: Bryan O'Sullivan Date: Wed, 29 Mar 2006 23:23:24 +0000 (-0800) Subject: IB/ipath: core device driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7bb206e3b20477c8bcbbdf20834d456b0b6d82c4;p=linux-beck.git IB/ipath: core device driver The ipath driver is a low-level driver for PathScale InfiniPath host channel adapters (HCAs) based on the HT-400 and PE-800 chips, including the InfiniPath HT-460, the small form factor InfiniPath HT-460, the InfiniPath HT-470 and the Linux Networx LS/X. The ipath_driver.c file contains much of the low-level device handling code. Signed-off-by: Bryan O'Sullivan Signed-off-by: Roland Dreier --- diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c new file mode 100644 index 000000000000..58a94efb0070 --- /dev/null +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -0,0 +1,1983 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include + +#include "ipath_kernel.h" +#include "ips_common.h" +#include "ipath_layer.h" + +static void ipath_update_pio_bufs(struct ipath_devdata *); + +const char *ipath_get_unit_name(int unit) +{ + static char iname[16]; + snprintf(iname, sizeof iname, "infinipath%u", unit); + return iname; +} + +EXPORT_SYMBOL_GPL(ipath_get_unit_name); + +#define DRIVER_LOAD_MSG "PathScale " IPATH_DRV_NAME " loaded: " +#define PFX IPATH_DRV_NAME ": " + +/* + * The size has to be longer than this string, so we can append + * board/chip information to it in the init code. + */ +const char ipath_core_version[] = IPATH_IDSTR "\n"; + +static struct idr unit_table; +DEFINE_SPINLOCK(ipath_devs_lock); +LIST_HEAD(ipath_dev_list); + +wait_queue_head_t ipath_sma_state_wait; + +unsigned ipath_debug = __IPATH_INFO; + +module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(debug, "mask for debug prints"); +EXPORT_SYMBOL_GPL(ipath_debug); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("PathScale "); +MODULE_DESCRIPTION("Pathscale InfiniPath driver"); + +const char *ipath_ibcstatus_str[] = { + "Disabled", + "LinkUp", + "PollActive", + "PollQuiet", + "SleepDelay", + "SleepQuiet", + "LState6", /* unused */ + "LState7", /* unused */ + "CfgDebounce", + "CfgRcvfCfg", + "CfgWaitRmt", + "CfgIdle", + "RecovRetrain", + "LState0xD", /* unused */ + "RecovWaitRmt", + "RecovIdle", +}; + +/* + * These variables are initialized in the chip-specific files + * but are defined here. + */ +u16 ipath_gpio_sda_num, ipath_gpio_scl_num; +u64 ipath_gpio_sda, ipath_gpio_scl; +u64 infinipath_i_bitsextant; +ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant; +u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask; + +static void __devexit ipath_remove_one(struct pci_dev *); +static int __devinit ipath_init_one(struct pci_dev *, + const struct pci_device_id *); + +/* Only needed for registration, nothing else needs this info */ +#define PCI_VENDOR_ID_PATHSCALE 0x1fc1 +#define PCI_DEVICE_ID_INFINIPATH_HT 0xd +#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10 + +static const struct pci_device_id ipath_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, + PCI_DEVICE_ID_INFINIPATH_HT)}, + {PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, + PCI_DEVICE_ID_INFINIPATH_PE800)}, +}; + +MODULE_DEVICE_TABLE(pci, ipath_pci_tbl); + +static struct pci_driver ipath_driver = { + .name = IPATH_DRV_NAME, + .probe = ipath_init_one, + .remove = __devexit_p(ipath_remove_one), + .id_table = ipath_pci_tbl, +}; + +/* + * This is where port 0's rcvhdrtail register is written back; we also + * want nothing else sharing the cache line, so make it a cache line + * in size. Used for all units. + */ +volatile __le64 *ipath_port0_rcvhdrtail; +dma_addr_t ipath_port0_rcvhdrtail_dma; +static int port0_rcvhdrtail_refs; + +static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev, + u32 *bar0, u32 *bar1) +{ + int ret; + + ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + if (ret) + ipath_dev_err(dd, "failed to read bar0 before enable: " + "error %d\n", -ret); + + ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1); + if (ret) + ipath_dev_err(dd, "failed to read bar1 before enable: " + "error %d\n", -ret); + + ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1); +} + +static void ipath_free_devdata(struct pci_dev *pdev, + struct ipath_devdata *dd) +{ + unsigned long flags; + + pci_set_drvdata(pdev, NULL); + + if (dd->ipath_unit != -1) { + spin_lock_irqsave(&ipath_devs_lock, flags); + idr_remove(&unit_table, dd->ipath_unit); + list_del(&dd->ipath_list); + spin_unlock_irqrestore(&ipath_devs_lock, flags); + } + dma_free_coherent(&pdev->dev, sizeof(*dd), dd, dd->ipath_dma_addr); +} + +static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) +{ + unsigned long flags; + struct ipath_devdata *dd; + dma_addr_t dma_addr; + int ret; + + if (!idr_pre_get(&unit_table, GFP_KERNEL)) { + dd = ERR_PTR(-ENOMEM); + goto bail; + } + + dd = dma_alloc_coherent(&pdev->dev, sizeof(*dd), &dma_addr, + GFP_KERNEL); + + if (!dd) { + dd = ERR_PTR(-ENOMEM); + goto bail; + } + + dd->ipath_dma_addr = dma_addr; + dd->ipath_unit = -1; + + spin_lock_irqsave(&ipath_devs_lock, flags); + + ret = idr_get_new(&unit_table, dd, &dd->ipath_unit); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME + ": Could not allocate unit ID: error %d\n", -ret); + ipath_free_devdata(pdev, dd); + dd = ERR_PTR(ret); + goto bail_unlock; + } + + dd->pcidev = pdev; + pci_set_drvdata(pdev, dd); + + list_add(&dd->ipath_list, &ipath_dev_list); + +bail_unlock: + spin_unlock_irqrestore(&ipath_devs_lock, flags); + +bail: + return dd; +} + +static inline struct ipath_devdata *__ipath_lookup(int unit) +{ + return idr_find(&unit_table, unit); +} + +struct ipath_devdata *ipath_lookup(int unit) +{ + struct ipath_devdata *dd; + unsigned long flags; + + spin_lock_irqsave(&ipath_devs_lock, flags); + dd = __ipath_lookup(unit); + spin_unlock_irqrestore(&ipath_devs_lock, flags); + + return dd; +} + +int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp) +{ + int nunits, npresent, nup; + struct ipath_devdata *dd; + unsigned long flags; + u32 maxports; + + nunits = npresent = nup = maxports = 0; + + spin_lock_irqsave(&ipath_devs_lock, flags); + + list_for_each_entry(dd, &ipath_dev_list, ipath_list) { + nunits++; + if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase) + npresent++; + if (dd->ipath_lid && + !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN + | IPATH_LINKUNK))) + nup++; + if (dd->ipath_cfgports > maxports) + maxports = dd->ipath_cfgports; + } + + spin_unlock_irqrestore(&ipath_devs_lock, flags); + + if (npresentp) + *npresentp = npresent; + if (nupp) + *nupp = nup; + if (maxportsp) + *maxportsp = maxports; + + return nunits; +} + +static int init_port0_rcvhdrtail(struct pci_dev *pdev) +{ + int ret; + + mutex_lock(&ipath_mutex); + + if (!ipath_port0_rcvhdrtail) { + ipath_port0_rcvhdrtail = + dma_alloc_coherent(&pdev->dev, + IPATH_PORT0_RCVHDRTAIL_SIZE, + &ipath_port0_rcvhdrtail_dma, + GFP_KERNEL); + + if (!ipath_port0_rcvhdrtail) { + ret = -ENOMEM; + goto bail; + } + } + port0_rcvhdrtail_refs++; + ret = 0; + +bail: + mutex_unlock(&ipath_mutex); + + return ret; +} + +static void cleanup_port0_rcvhdrtail(struct pci_dev *pdev) +{ + mutex_lock(&ipath_mutex); + + if (!--port0_rcvhdrtail_refs) { + dma_free_coherent(&pdev->dev, IPATH_PORT0_RCVHDRTAIL_SIZE, + (void *) ipath_port0_rcvhdrtail, + ipath_port0_rcvhdrtail_dma); + ipath_port0_rcvhdrtail = NULL; + } + + mutex_unlock(&ipath_mutex); +} + +/* + * These next two routines are placeholders in case we don't have per-arch + * code for controlling write combining. If explicit control of write + * combining is not available, performance will probably be awful. + */ + +int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd) +{ + return -EOPNOTSUPP; +} + +void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd) +{ +} + +static int __devinit ipath_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret, len, j; + struct ipath_devdata *dd; + unsigned long long addr; + u32 bar0 = 0, bar1 = 0; + u8 rev; + + ret = init_port0_rcvhdrtail(pdev); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME + ": Could not allocate port0_rcvhdrtail: error %d\n", + -ret); + goto bail; + } + + dd = ipath_alloc_devdata(pdev); + if (IS_ERR(dd)) { + ret = PTR_ERR(dd); + printk(KERN_ERR IPATH_DRV_NAME + ": Could not allocate devdata: error %d\n", -ret); + goto bail_rcvhdrtail; + } + + ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit); + + read_bars(dd, pdev, &bar0, &bar1); + + ret = pci_enable_device(pdev); + if (ret) { + /* This can happen iff: + * + * We did a chip reset, and then failed to reprogram the + * BAR, or the chip reset due to an internal error. We then + * unloaded the driver and reloaded it. + * + * Both reset cases set the BAR back to initial state. For + * the latter case, the AER sticky error bit at offset 0x718 + * should be set, but the Linux kernel doesn't yet know + * about that, it appears. If the original BAR was retained + * in the kernel data structures, this may be OK. + */ + ipath_dev_err(dd, "enable unit %d failed: error %d\n", + dd->ipath_unit, -ret); + goto bail_devdata; + } + addr = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x " + "driver_data %lx\n", addr, len, pdev->irq, ent->vendor, + ent->device, ent->driver_data); + + read_bars(dd, pdev, &bar0, &bar1); + + if (!bar1 && !(bar0 & ~0xf)) { + if (addr) { + dev_info(&pdev->dev, "BAR is 0 (probable RESET), " + "rewriting as %llx\n", addr); + ret = pci_write_config_dword( + pdev, PCI_BASE_ADDRESS_0, addr); + if (ret) { + ipath_dev_err(dd, "rewrite of BAR0 " + "failed: err %d\n", -ret); + goto bail_disable; + } + ret = pci_write_config_dword( + pdev, PCI_BASE_ADDRESS_1, addr >> 32); + if (ret) { + ipath_dev_err(dd, "rewrite of BAR1 " + "failed: err %d\n", -ret); + goto bail_disable; + } + } else { + ipath_dev_err(dd, "BAR is 0 (probable RESET), " + "not usable until reboot\n"); + ret = -ENODEV; + goto bail_disable; + } + } + + ret = pci_request_regions(pdev, IPATH_DRV_NAME); + if (ret) { + dev_info(&pdev->dev, "pci_request_regions unit %u fails: " + "err %d\n", dd->ipath_unit, -ret); + goto bail_disable; + } + + ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (ret) { + dev_info(&pdev->dev, "pci_set_dma_mask unit %u " + "fails: %d\n", dd->ipath_unit, ret); + goto bail_regions; + } + + pci_set_master(pdev); + + /* + * Save BARs to rewrite after device reset. Save all 64 bits of + * BAR, just in case. + */ + dd->ipath_pcibar0 = addr; + dd->ipath_pcibar1 = addr >> 32; + dd->ipath_deviceid = ent->device; /* save for later use */ + dd->ipath_vendorid = ent->vendor; + + /* setup the chip-specific functions, as early as possible. */ + switch (ent->device) { + case PCI_DEVICE_ID_INFINIPATH_HT: + ipath_init_ht400_funcs(dd); + break; + case PCI_DEVICE_ID_INFINIPATH_PE800: + ipath_init_pe800_funcs(dd); + break; + default: + ipath_dev_err(dd, "Found unknown PathScale deviceid 0x%x, " + "failing\n", ent->device); + return -ENODEV; + } + + for (j = 0; j < 6; j++) { + if (!pdev->resource[j].start) + continue; + ipath_cdbg(VERBOSE, "BAR %d start %lx, end %lx, len %lx\n", + j, pdev->resource[j].start, + pdev->resource[j].end, + pci_resource_len(pdev, j)); + } + + if (!addr) { + ipath_dev_err(dd, "No valid address in BAR 0!\n"); + ret = -ENODEV; + goto bail_regions; + } + + dd->ipath_deviceid = ent->device; /* save for later use */ + dd->ipath_vendorid = ent->vendor; + + ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + if (ret) { + ipath_dev_err(dd, "Failed to read PCI revision ID unit " + "%u: err %d\n", dd->ipath_unit, -ret); + goto bail_regions; /* shouldn't ever happen */ + } + dd->ipath_pcirev = rev; + + dd->ipath_kregbase = ioremap_nocache(addr, len); + + if (!dd->ipath_kregbase) { + ipath_dbg("Unable to map io addr %llx to kvirt, failing\n", + addr); + ret = -ENOMEM; + goto bail_iounmap; + } + dd->ipath_kregend = (u64 __iomem *) + ((void __iomem *)dd->ipath_kregbase + len); + dd->ipath_physaddr = addr; /* used for io_remap, etc. */ + /* for user mmap */ + dd->ipath_kregvirt = (u64 __iomem *) phys_to_virt(addr); + ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p " + "kregvirt %p\n", addr, dd->ipath_kregbase, + dd->ipath_kregvirt); + + /* + * clear ipath_flags here instead of in ipath_init_chip as it is set + * by ipath_setup_htconfig. + */ + dd->ipath_flags = 0; + + if (dd->ipath_f_bus(dd, pdev)) + ipath_dev_err(dd, "Failed to setup config space; " + "continuing anyway\n"); + + /* + * set up our interrupt handler; SA_SHIRQ probably not needed, + * since MSI interrupts shouldn't be shared but won't hurt for now. + * check 0 irq after we return from chip-specific bus setup, since + * that can affect this due to setup + */ + if (!pdev->irq) + ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't " + "work\n"); + else { + ret = request_irq(pdev->irq, ipath_intr, SA_SHIRQ, + IPATH_DRV_NAME, dd); + if (ret) { + ipath_dev_err(dd, "Couldn't setup irq handler, " + "irq=%u: %d\n", pdev->irq, ret); + goto bail_iounmap; + } + } + + ret = ipath_init_chip(dd, 0); /* do the chip-specific init */ + if (ret) + goto bail_iounmap; + + ret = ipath_enable_wc(dd); + + if (ret) { + ipath_dev_err(dd, "Write combining not enabled " + "(err %d): performance may be poor\n", + -ret); + ret = 0; + } + + ipath_device_create_group(&pdev->dev, dd); + ipathfs_add_device(dd); + ipath_user_add(dd); + ipath_layer_add(dd); + + goto bail; + +bail_iounmap: + iounmap((volatile void __iomem *) dd->ipath_kregbase); + +bail_regions: + pci_release_regions(pdev); + +bail_disable: + pci_disable_device(pdev); + +bail_devdata: + ipath_free_devdata(pdev, dd); + +bail_rcvhdrtail: + cleanup_port0_rcvhdrtail(pdev); + +bail: + return ret; +} + +static void __devexit ipath_remove_one(struct pci_dev *pdev) +{ + struct ipath_devdata *dd; + + ipath_cdbg(VERBOSE, "removing, pdev=%p\n", pdev); + if (!pdev) + return; + + dd = pci_get_drvdata(pdev); + ipath_layer_del(dd); + ipath_user_del(dd); + ipathfs_remove_device(dd); + ipath_device_remove_group(&pdev->dev, dd); + ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, " + "unit %u\n", dd, (u32) dd->ipath_unit); + if (dd->ipath_kregbase) { + ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", + dd->ipath_kregbase); + iounmap((volatile void __iomem *) dd->ipath_kregbase); + dd->ipath_kregbase = NULL; + } + pci_release_regions(pdev); + ipath_cdbg(VERBOSE, "calling pci_disable_device\n"); + pci_disable_device(pdev); + + ipath_free_devdata(pdev, dd); + cleanup_port0_rcvhdrtail(pdev); +} + +/* general driver use */ +DEFINE_MUTEX(ipath_mutex); + +static DEFINE_SPINLOCK(ipath_pioavail_lock); + +/** + * ipath_disarm_piobufs - cancel a range of PIO buffers + * @dd: the infinipath device + * @first: the first PIO buffer to cancel + * @cnt: the number of PIO buffers to cancel + * + * cancel a range of PIO buffers, used when they might be armed, but + * not triggered. Used at init to ensure buffer state, and also user + * process close, in case it died while writing to a PIO buffer + * Also after errors. + */ +void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first, + unsigned cnt) +{ + unsigned i, last = first + cnt; + u64 sendctrl, sendorig; + + ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first); + sendorig = dd->ipath_sendctrl | INFINIPATH_S_DISARM; + for (i = first; i < last; i++) { + sendctrl = sendorig | + (i << INFINIPATH_S_DISARMPIOBUF_SHIFT); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + sendctrl); + } + + /* + * Write it again with current value, in case ipath_sendctrl changed + * while we were looping; no critical bits that would require + * locking. + * + * Write a 0, and then the original value, reading scratch in + * between. This seems to avoid a chip timing race that causes + * pioavail updates to memory to stop. + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + 0); + sendorig = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + dd->ipath_sendctrl); +} + +/** + * ipath_wait_linkstate - wait for an IB link state change to occur + * @dd: the infinipath device + * @state: the state to wait for + * @msecs: the number of milliseconds to wait + * + * wait up to msecs milliseconds for IB link state change to occur for + * now, take the easy polling route. Currently used only by + * ipath_layer_set_linkstate. Returns 0 if state reached, otherwise + * -ETIMEDOUT state can have multiple states set, for any of several + * transitions. + */ +int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs) +{ + dd->ipath_sma_state_wanted = state; + wait_event_interruptible_timeout(ipath_sma_state_wait, + (dd->ipath_flags & state), + msecs_to_jiffies(msecs)); + dd->ipath_sma_state_wanted = 0; + + if (!(dd->ipath_flags & state)) { + u64 val; + ipath_cdbg(SMA, "Didn't reach linkstate %s within %u ms\n", + /* test INIT ahead of DOWN, both can be set */ + (state & IPATH_LINKINIT) ? "INIT" : + ((state & IPATH_LINKDOWN) ? "DOWN" : + ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")), + msecs); + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus); + ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n", + (unsigned long long) ipath_read_kreg64( + dd, dd->ipath_kregs->kr_ibcctrl), + (unsigned long long) val, + ipath_ibcstatus_str[val & 0xf]); + } + return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT; +} + +void ipath_decode_err(char *buf, size_t blen, ipath_err_t err) +{ + *buf = '\0'; + if (err & INFINIPATH_E_RHDRLEN) + strlcat(buf, "rhdrlen ", blen); + if (err & INFINIPATH_E_RBADTID) + strlcat(buf, "rbadtid ", blen); + if (err & INFINIPATH_E_RBADVERSION) + strlcat(buf, "rbadversion ", blen); + if (err & INFINIPATH_E_RHDR) + strlcat(buf, "rhdr ", blen); + if (err & INFINIPATH_E_RLONGPKTLEN) + strlcat(buf, "rlongpktlen ", blen); + if (err & INFINIPATH_E_RSHORTPKTLEN) + strlcat(buf, "rshortpktlen ", blen); + if (err & INFINIPATH_E_RMAXPKTLEN) + strlcat(buf, "rmaxpktlen ", blen); + if (err & INFINIPATH_E_RMINPKTLEN) + strlcat(buf, "rminpktlen ", blen); + if (err & INFINIPATH_E_RFORMATERR) + strlcat(buf, "rformaterr ", blen); + if (err & INFINIPATH_E_RUNSUPVL) + strlcat(buf, "runsupvl ", blen); + if (err & INFINIPATH_E_RUNEXPCHAR) + strlcat(buf, "runexpchar ", blen); + if (err & INFINIPATH_E_RIBFLOW) + strlcat(buf, "ribflow ", blen); + if (err & INFINIPATH_E_REBP) + strlcat(buf, "EBP ", blen); + if (err & INFINIPATH_E_SUNDERRUN) + strlcat(buf, "sunderrun ", blen); + if (err & INFINIPATH_E_SPIOARMLAUNCH) + strlcat(buf, "spioarmlaunch ", blen); + if (err & INFINIPATH_E_SUNEXPERRPKTNUM) + strlcat(buf, "sunexperrpktnum ", blen); + if (err & INFINIPATH_E_SDROPPEDDATAPKT) + strlcat(buf, "sdroppeddatapkt ", blen); + if (err & INFINIPATH_E_SDROPPEDSMPPKT) + strlcat(buf, "sdroppedsmppkt ", blen); + if (err & INFINIPATH_E_SMAXPKTLEN) + strlcat(buf, "smaxpktlen ", blen); + if (err & INFINIPATH_E_SMINPKTLEN) + strlcat(buf, "sminpktlen ", blen); + if (err & INFINIPATH_E_SUNSUPVL) + strlcat(buf, "sunsupVL ", blen); + if (err & INFINIPATH_E_SPKTLEN) + strlcat(buf, "spktlen ", blen); + if (err & INFINIPATH_E_INVALIDADDR) + strlcat(buf, "invalidaddr ", blen); + if (err & INFINIPATH_E_RICRC) + strlcat(buf, "CRC ", blen); + if (err & INFINIPATH_E_RVCRC) + strlcat(buf, "VCRC ", blen); + if (err & INFINIPATH_E_RRCVEGRFULL) + strlcat(buf, "rcvegrfull ", blen); + if (err & INFINIPATH_E_RRCVHDRFULL) + strlcat(buf, "rcvhdrfull ", blen); + if (err & INFINIPATH_E_IBSTATUSCHANGED) + strlcat(buf, "ibcstatuschg ", blen); + if (err & INFINIPATH_E_RIBLOSTLINK) + strlcat(buf, "riblostlink ", blen); + if (err & INFINIPATH_E_HARDWARE) + strlcat(buf, "hardware ", blen); + if (err & INFINIPATH_E_RESET) + strlcat(buf, "reset ", blen); +} + +/** + * get_rhf_errstring - decode RHF errors + * @err: the err number + * @msg: the output buffer + * @len: the length of the output buffer + * + * only used one place now, may want more later + */ +static void get_rhf_errstring(u32 err, char *msg, size_t len) +{ + /* if no errors, and so don't need to check what's first */ + *msg = '\0'; + + if (err & INFINIPATH_RHF_H_ICRCERR) + strlcat(msg, "icrcerr ", len); + if (err & INFINIPATH_RHF_H_VCRCERR) + strlcat(msg, "vcrcerr ", len); + if (err & INFINIPATH_RHF_H_PARITYERR) + strlcat(msg, "parityerr ", len); + if (err & INFINIPATH_RHF_H_LENERR) + strlcat(msg, "lenerr ", len); + if (err & INFINIPATH_RHF_H_MTUERR) + strlcat(msg, "mtuerr ", len); + if (err & INFINIPATH_RHF_H_IHDRERR) + /* infinipath hdr checksum error */ + strlcat(msg, "ipathhdrerr ", len); + if (err & INFINIPATH_RHF_H_TIDERR) + strlcat(msg, "tiderr ", len); + if (err & INFINIPATH_RHF_H_MKERR) + /* bad port, offset, etc. */ + strlcat(msg, "invalid ipathhdr ", len); + if (err & INFINIPATH_RHF_H_IBERR) + strlcat(msg, "iberr ", len); + if (err & INFINIPATH_RHF_L_SWA) + strlcat(msg, "swA ", len); + if (err & INFINIPATH_RHF_L_SWB) + strlcat(msg, "swB ", len); +} + +/** + * ipath_get_egrbuf - get an eager buffer + * @dd: the infinipath device + * @bufnum: the eager buffer to get + * @err: unused + * + * must only be called if ipath_pd[port] is known to be allocated + */ +static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum, + int err) +{ + return dd->ipath_port0_skbs ? + (void *)dd->ipath_port0_skbs[bufnum]->data : NULL; +} + +/** + * ipath_alloc_skb - allocate an skb and buffer with possible constraints + * @dd: the infinipath device + * @gfp_mask: the sk_buff SFP mask + */ +struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, + gfp_t gfp_mask) +{ + struct sk_buff *skb; + u32 len; + + /* + * Only fully supported way to handle this is to allocate lots + * extra, align as needed, and then do skb_reserve(). That wastes + * a lot of memory... I'll have to hack this into infinipath_copy + * also. + */ + + /* + * We need 4 extra bytes for unaligned transfer copying + */ + if (dd->ipath_flags & IPATH_4BYTE_TID) { + /* we need a 4KB multiple alignment, and there is no way + * to do it except to allocate extra and then skb_reserve + * enough to bring it up to the right alignment. + */ + len = dd->ipath_ibmaxlen + 4 + (1 << 11) - 1; + } + else + len = dd->ipath_ibmaxlen + 4; + skb = __dev_alloc_skb(len, gfp_mask); + if (!skb) { + ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n", + len); + goto bail; + } + if (dd->ipath_flags & IPATH_4BYTE_TID) { + u32 una = ((1 << 11) - 1) & (unsigned long)(skb->data + 4); + if (una) + skb_reserve(skb, 4 + (1 << 11) - una); + else + skb_reserve(skb, 4); + } else + skb_reserve(skb, 4); + +bail: + return skb; +} + +/** + * ipath_rcv_layer - receive a packet for the layered (ethernet) driver + * @dd: the infinipath device + * @etail: the sk_buff number + * @tlen: the total packet length + * @hdr: the ethernet header + * + * Separate routine for better overall optimization + */ +static void ipath_rcv_layer(struct ipath_devdata *dd, u32 etail, + u32 tlen, struct ether_header *hdr) +{ + u32 elen; + u8 pad, *bthbytes; + struct sk_buff *skb, *nskb; + + if (dd->ipath_port0_skbs && hdr->sub_opcode == OPCODE_ENCAP) { + /* + * Allocate a new sk_buff to replace the one we give + * to the network stack. + */ + nskb = ipath_alloc_skb(dd, GFP_ATOMIC); + if (!nskb) { + /* count OK packets that we drop */ + ipath_stats.sps_krdrops++; + return; + } + + bthbytes = (u8 *) hdr->bth; + pad = (bthbytes[1] >> 4) & 3; + /* +CRC32 */ + elen = tlen - (sizeof(*hdr) + pad + sizeof(u32)); + + skb = dd->ipath_port0_skbs[etail]; + dd->ipath_port0_skbs[etail] = nskb; + skb_put(skb, elen); + + dd->ipath_f_put_tid(dd, etail + (u64 __iomem *) + ((char __iomem *) dd->ipath_kregbase + + dd->ipath_rcvegrbase), 0, + virt_to_phys(nskb->data)); + + __ipath_layer_rcv(dd, hdr, skb); + + /* another ether packet received */ + ipath_stats.sps_ether_rpkts++; + } + else if (hdr->sub_opcode == OPCODE_LID_ARP) + __ipath_layer_rcv_lid(dd, hdr); +} + +/* + * ipath_kreceive - receive a packet + * @dd: the infinipath device + * + * called from interrupt handler for errors or receive interrupt + */ +void ipath_kreceive(struct ipath_devdata *dd) +{ + u64 *rc; + void *ebuf; + const u32 rsize = dd->ipath_rcvhdrentsize; /* words */ + const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */ + u32 etail = -1, l, hdrqtail; + struct ips_message_header *hdr; + u32 eflags, i, etype, tlen, pkttot = 0; + static u64 totcalls; /* stats, may eventually remove */ + char emsg[128]; + + if (!dd->ipath_hdrqtailptr) { + ipath_dev_err(dd, + "hdrqtailptr not set, can't do receives\n"); + goto bail; + } + + /* There is already a thread processing this queue. */ + if (test_and_set_bit(0, &dd->ipath_rcv_pending)) + goto bail; + + if (dd->ipath_port0head == + (u32)le64_to_cpu(*dd->ipath_hdrqtailptr)) + goto done; + +gotmore: + /* + * read only once at start. If in flood situation, this helps + * performance slightly. If more arrive while we are processing, + * we'll come back here and do them + */ + hdrqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr); + + for (i = 0, l = dd->ipath_port0head; l != hdrqtail; i++) { + u32 qp; + u8 *bthbytes; + + rc = (u64 *) (dd->ipath_pd[0]->port_rcvhdrq + (l << 2)); + hdr = (struct ips_message_header *)&rc[1]; + /* + * could make a network order version of IPATH_KD_QP, and + * do the obvious shift before masking to speed this up. + */ + qp = ntohl(hdr->bth[1]) & 0xffffff; + bthbytes = (u8 *) hdr->bth; + + eflags = ips_get_hdr_err_flags((__le32 *) rc); + etype = ips_get_rcv_type((__le32 *) rc); + /* total length */ + tlen = ips_get_length_in_bytes((__le32 *) rc); + ebuf = NULL; + if (etype != RCVHQ_RCV_TYPE_EXPECTED) { + /* + * it turns out that the chips uses an eager buffer + * for all non-expected packets, whether it "needs" + * one or not. So always get the index, but don't + * set ebuf (so we try to copy data) unless the + * length requires it. + */ + etail = ips_get_index((__le32 *) rc); + if (tlen > sizeof(*hdr) || + etype == RCVHQ_RCV_TYPE_NON_KD) + ebuf = ipath_get_egrbuf(dd, etail, 0); + } + + /* + * both tiderr and ipathhdrerr are set for all plain IB + * packets; only ipathhdrerr should be set. + */ + + if (etype != RCVHQ_RCV_TYPE_NON_KD && etype != + RCVHQ_RCV_TYPE_ERROR && ips_get_ipath_ver( + hdr->iph.ver_port_tid_offset) != + IPS_PROTO_VERSION) { + ipath_cdbg(PKT, "Bad InfiniPath protocol version " + "%x\n", etype); + } + + if (eflags & ~(INFINIPATH_RHF_H_TIDERR | + INFINIPATH_RHF_H_IHDRERR)) { + get_rhf_errstring(eflags, emsg, sizeof emsg); + ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u " + "tlen=%x opcode=%x egridx=%x: %s\n", + eflags, l, etype, tlen, bthbytes[0], + ips_get_index((__le32 *) rc), emsg); + } else if (etype == RCVHQ_RCV_TYPE_NON_KD) { + int ret = __ipath_verbs_rcv(dd, rc + 1, + ebuf, tlen); + if (ret == -ENODEV) + ipath_cdbg(VERBOSE, + "received IB packet, " + "not SMA (QP=%x)\n", qp); + } else if (etype == RCVHQ_RCV_TYPE_EAGER) { + if (qp == IPATH_KD_QP && + bthbytes[0] == ipath_layer_rcv_opcode && + ebuf) + ipath_rcv_layer(dd, etail, tlen, + (struct ether_header *)hdr); + else + ipath_cdbg(PKT, "typ %x, opcode %x (eager, " + "qp=%x), len %x; ignored\n", + etype, bthbytes[0], qp, tlen); + } + else if (etype == RCVHQ_RCV_TYPE_EXPECTED) + ipath_dbg("Bug: Expected TID, opcode %x; ignored\n", + be32_to_cpu(hdr->bth[0]) & 0xff); + else if (eflags & (INFINIPATH_RHF_H_TIDERR | + INFINIPATH_RHF_H_IHDRERR)) { + /* + * This is a type 3 packet, only the LRH is in the + * rcvhdrq, the rest of the header is in the eager + * buffer. + */ + u8 opcode; + if (ebuf) { + bthbytes = (u8 *) ebuf; + opcode = *bthbytes; + } + else + opcode = 0; + get_rhf_errstring(eflags, emsg, sizeof emsg); + ipath_dbg("Err %x (%s), opcode %x, egrbuf %x, " + "len %x\n", eflags, emsg, opcode, etail, + tlen); + } else { + /* + * error packet, type of error unknown. + * Probably type 3, but we don't know, so don't + * even try to print the opcode, etc. + */ + ipath_dbg("Error Pkt, but no eflags! egrbuf %x, " + "len %x\nhdrq@%lx;hdrq+%x rhf: %llx; " + "hdr %llx %llx %llx %llx %llx\n", + etail, tlen, (unsigned long) rc, l, + (unsigned long long) rc[0], + (unsigned long long) rc[1], + (unsigned long long) rc[2], + (unsigned long long) rc[3], + (unsigned long long) rc[4], + (unsigned long long) rc[5]); + } + l += rsize; + if (l >= maxcnt) + l = 0; + /* + * update for each packet, to help prevent overflows if we + * have lots of packets. + */ + (void)ipath_write_ureg(dd, ur_rcvhdrhead, + dd->ipath_rhdrhead_intr_off | l, 0); + if (etype != RCVHQ_RCV_TYPE_EXPECTED) + (void)ipath_write_ureg(dd, ur_rcvegrindexhead, + etail, 0); + } + + pkttot += i; + + dd->ipath_port0head = l; + + if (hdrqtail != (u32)le64_to_cpu(*dd->ipath_hdrqtailptr)) + /* more arrived while we handled first batch */ + goto gotmore; + + if (pkttot > ipath_stats.sps_maxpkts_call) + ipath_stats.sps_maxpkts_call = pkttot; + ipath_stats.sps_port0pkts += pkttot; + ipath_stats.sps_avgpkts_call = + ipath_stats.sps_port0pkts / ++totcalls; + +done: + clear_bit(0, &dd->ipath_rcv_pending); + smp_mb__after_clear_bit(); + +bail:; +} + +/** + * ipath_update_pio_bufs - update shadow copy of the PIO availability map + * @dd: the infinipath device + * + * called whenever our local copy indicates we have run out of send buffers + * NOTE: This can be called from interrupt context by some code + * and from non-interrupt context by ipath_getpiobuf(). + */ + +static void ipath_update_pio_bufs(struct ipath_devdata *dd) +{ + unsigned long flags; + int i; + const unsigned piobregs = (unsigned)dd->ipath_pioavregs; + + /* If the generation (check) bits have changed, then we update the + * busy bit for the corresponding PIO buffer. This algorithm will + * modify positions to the value they already have in some cases + * (i.e., no change), but it's faster than changing only the bits + * that have changed. + * + * We would like to do this atomicly, to avoid spinlocks in the + * critical send path, but that's not really possible, given the + * type of changes, and that this routine could be called on + * multiple cpu's simultaneously, so we lock in this routine only, + * to avoid conflicting updates; all we change is the shadow, and + * it's a single 64 bit memory location, so by definition the update + * is atomic in terms of what other cpu's can see in testing the + * bits. The spin_lock overhead isn't too bad, since it only + * happens when all buffers are in use, so only cpu overhead, not + * latency or bandwidth is affected. + */ +#define _IPATH_ALL_CHECKBITS 0x5555555555555555ULL + if (!dd->ipath_pioavailregs_dma) { + ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n"); + return; + } + if (ipath_debug & __IPATH_VERBDBG) { + /* only if packet debug and verbose */ + volatile __le64 *dma = dd->ipath_pioavailregs_dma; + unsigned long *shadow = dd->ipath_pioavailshadow; + + ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, " + "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx " + "s3=%lx\n", + (unsigned long long) le64_to_cpu(dma[0]), + shadow[0], + (unsigned long long) le64_to_cpu(dma[1]), + shadow[1], + (unsigned long long) le64_to_cpu(dma[2]), + shadow[2], + (unsigned long long) le64_to_cpu(dma[3]), + shadow[3]); + if (piobregs > 4) + ipath_cdbg( + PKT, "2nd group, dma4=%llx shad4=%lx, " + "d5=%llx s5=%lx, d6=%llx s6=%lx, " + "d7=%llx s7=%lx\n", + (unsigned long long) le64_to_cpu(dma[4]), + shadow[4], + (unsigned long long) le64_to_cpu(dma[5]), + shadow[5], + (unsigned long long) le64_to_cpu(dma[6]), + shadow[6], + (unsigned long long) le64_to_cpu(dma[7]), + shadow[7]); + } + spin_lock_irqsave(&ipath_pioavail_lock, flags); + for (i = 0; i < piobregs; i++) { + u64 pchbusy, pchg, piov, pnew; + /* + * Chip Errata: bug 6641; even and odd qwords>3 are swapped + */ + if (i > 3) { + if (i & 1) + piov = le64_to_cpu( + dd->ipath_pioavailregs_dma[i - 1]); + else + piov = le64_to_cpu( + dd->ipath_pioavailregs_dma[i + 1]); + } else + piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]); + pchg = _IPATH_ALL_CHECKBITS & + ~(dd->ipath_pioavailshadow[i] ^ piov); + pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT; + if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) { + pnew = dd->ipath_pioavailshadow[i] & ~pchbusy; + pnew |= piov & pchbusy; + dd->ipath_pioavailshadow[i] = pnew; + } + } + spin_unlock_irqrestore(&ipath_pioavail_lock, flags); +} + +/** + * ipath_setrcvhdrsize - set the receive header size + * @dd: the infinipath device + * @rhdrsize: the receive header size + * + * called from user init code, and also layered driver init + */ +int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize) +{ + int ret = 0; + + if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) { + if (dd->ipath_rcvhdrsize != rhdrsize) { + dev_info(&dd->pcidev->dev, + "Error: can't set protocol header " + "size %u, already %u\n", + rhdrsize, dd->ipath_rcvhdrsize); + ret = -EAGAIN; + } else + ipath_cdbg(VERBOSE, "Reuse same protocol header " + "size %u\n", dd->ipath_rcvhdrsize); + } else if (rhdrsize > (dd->ipath_rcvhdrentsize - + (sizeof(u64) / sizeof(u32)))) { + ipath_dbg("Error: can't set protocol header size %u " + "(> max %u)\n", rhdrsize, + dd->ipath_rcvhdrentsize - + (u32) (sizeof(u64) / sizeof(u32))); + ret = -EOVERFLOW; + } else { + dd->ipath_flags |= IPATH_RCVHDRSZ_SET; + dd->ipath_rcvhdrsize = rhdrsize; + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize, + dd->ipath_rcvhdrsize); + ipath_cdbg(VERBOSE, "Set protocol header size to %u\n", + dd->ipath_rcvhdrsize); + } + return ret; +} + +/** + * ipath_getpiobuf - find an available pio buffer + * @dd: the infinipath device + * @pbufnum: the buffer number is placed here + * + * do appropriate marking as busy, etc. + * returns buffer number if one found (>=0), negative number is error. + * Used by ipath_sma_send_pkt and ipath_layer_send + */ +u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 * pbufnum) +{ + int i, j, starti, updated = 0; + unsigned piobcnt, iter; + unsigned long flags; + unsigned long *shadow = dd->ipath_pioavailshadow; + u32 __iomem *buf; + + piobcnt = (unsigned)(dd->ipath_piobcnt2k + + dd->ipath_piobcnt4k); + starti = dd->ipath_lastport_piobuf; + iter = piobcnt - starti; + if (dd->ipath_upd_pio_shadow) { + /* + * Minor optimization. If we had no buffers on last call, + * start out by doing the update; continue and do scan even + * if no buffers were updated, to be paranoid + */ + ipath_update_pio_bufs(dd); + /* we scanned here, don't do it at end of scan */ + updated = 1; + i = starti; + } else + i = dd->ipath_lastpioindex; + +rescan: + /* + * while test_and_set_bit() is atomic, we do that and then the + * change_bit(), and the pair is not. See if this is the cause + * of the remaining armlaunch errors. + */ + spin_lock_irqsave(&ipath_pioavail_lock, flags); + for (j = 0; j < iter; j++, i++) { + if (i >= piobcnt) + i = starti; + /* + * To avoid bus lock overhead, we first find a candidate + * buffer, then do the test and set, and continue if that + * fails. + */ + if (test_bit((2 * i) + 1, shadow) || + test_and_set_bit((2 * i) + 1, shadow)) + continue; + /* flip generation bit */ + change_bit(2 * i, shadow); + break; + } + spin_unlock_irqrestore(&ipath_pioavail_lock, flags); + + if (j == iter) { + volatile __le64 *dma = dd->ipath_pioavailregs_dma; + + /* + * first time through; shadow exhausted, but may be real + * buffers available, so go see; if any updated, rescan + * (once) + */ + if (!updated) { + ipath_update_pio_bufs(dd); + updated = 1; + i = starti; + goto rescan; + } + dd->ipath_upd_pio_shadow = 1; + /* + * not atomic, but if we lose one once in a while, that's OK + */ + ipath_stats.sps_nopiobufs++; + if (!(++dd->ipath_consec_nopiobuf % 100000)) { + ipath_dbg( + "%u pio sends with no bufavail; dmacopy: " + "%llx %llx %llx %llx; shadow: " + "%lx %lx %lx %lx\n", + dd->ipath_consec_nopiobuf, + (unsigned long long) le64_to_cpu(dma[0]), + (unsigned long long) le64_to_cpu(dma[1]), + (unsigned long long) le64_to_cpu(dma[2]), + (unsigned long long) le64_to_cpu(dma[3]), + shadow[0], shadow[1], shadow[2], + shadow[3]); + /* + * 4 buffers per byte, 4 registers above, cover rest + * below + */ + if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > + (sizeof(shadow[0]) * 4 * 4)) + ipath_dbg("2nd group: dmacopy: %llx %llx " + "%llx %llx; shadow: %lx %lx " + "%lx %lx\n", + (unsigned long long) + le64_to_cpu(dma[4]), + (unsigned long long) + le64_to_cpu(dma[5]), + (unsigned long long) + le64_to_cpu(dma[6]), + (unsigned long long) + le64_to_cpu(dma[7]), + shadow[4], shadow[5], + shadow[6], shadow[7]); + } + buf = NULL; + goto bail; + } + + if (updated) + /* + * ran out of bufs, now some (at least this one we just + * got) are now available, so tell the layered driver. + */ + __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE); + + /* + * set next starting place. Since it's just an optimization, + * it doesn't matter who wins on this, so no locking + */ + dd->ipath_lastpioindex = i + 1; + if (dd->ipath_upd_pio_shadow) + dd->ipath_upd_pio_shadow = 0; + if (dd->ipath_consec_nopiobuf) + dd->ipath_consec_nopiobuf = 0; + if (i < dd->ipath_piobcnt2k) + buf = (u32 __iomem *) (dd->ipath_pio2kbase + + i * dd->ipath_palign); + else + buf = (u32 __iomem *) + (dd->ipath_pio4kbase + + (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign); + ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n", + i, (i < dd->ipath_piobcnt2k) ? 2 : 4, buf); + if (pbufnum) + *pbufnum = i; + +bail: + return buf; +} + +/** + * ipath_create_rcvhdrq - create a receive header queue + * @dd: the infinipath device + * @pd: the port data + * + * this *must* be physically contiguous memory, and for now, + * that limits it to what kmalloc can do. + */ +int ipath_create_rcvhdrq(struct ipath_devdata *dd, + struct ipath_portdata *pd) +{ + int ret = 0, amt; + + amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize * + sizeof(u32), PAGE_SIZE); + if (!pd->port_rcvhdrq) { + /* + * not using REPEAT isn't viable; at 128KB, we can easily + * fail this. The problem with REPEAT is we can block here + * "forever". There isn't an inbetween, unfortunately. We + * could reduce the risk by never freeing the rcvhdrq except + * at unload, but even then, the first time a port is used, + * we could delay for some time... + */ + gfp_t gfp_flags = GFP_USER | __GFP_COMP; + + pd->port_rcvhdrq = dma_alloc_coherent( + &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys, + gfp_flags); + + if (!pd->port_rcvhdrq) { + ipath_dev_err(dd, "attempt to allocate %d bytes " + "for port %u rcvhdrq failed\n", + amt, pd->port_port); + ret = -ENOMEM; + goto bail; + } + + pd->port_rcvhdrq_size = amt; + + ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu " + "for port %u rcvhdr Q\n", + amt >> PAGE_SHIFT, pd->port_rcvhdrq, + (unsigned long) pd->port_rcvhdrq_phys, + (unsigned long) pd->port_rcvhdrq_size, + pd->port_port); + } else { + /* + * clear for security, sanity, and/or debugging, each + * time we reuse + */ + memset(pd->port_rcvhdrq, 0, amt); + } + + /* + * tell chip each time we init it, even if we are re-using previous + * memory (we zero it at process close) + */ + ipath_cdbg(VERBOSE, "writing port %d rcvhdraddr as %lx\n", + pd->port_port, (unsigned long) pd->port_rcvhdrq_phys); + ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr, + pd->port_port, pd->port_rcvhdrq_phys); + + ret = 0; +bail: + return ret; +} + +int ipath_waitfor_complete(struct ipath_devdata *dd, ipath_kreg reg_id, + u64 bits_to_wait_for, u64 * valp) +{ + unsigned long timeout; + u64 lastval, val; + int ret; + + lastval = ipath_read_kreg64(dd, reg_id); + /* wait a ridiculously long time */ + timeout = jiffies + msecs_to_jiffies(5); + do { + val = ipath_read_kreg64(dd, reg_id); + /* set so they have something, even on failures. */ + *valp = val; + if ((val & bits_to_wait_for) == bits_to_wait_for) { + ret = 0; + break; + } + if (val != lastval) + ipath_cdbg(VERBOSE, "Changed from %llx to %llx, " + "waiting for %llx bits\n", + (unsigned long long) lastval, + (unsigned long long) val, + (unsigned long long) bits_to_wait_for); + cond_resched(); + if (time_after(jiffies, timeout)) { + ipath_dbg("Didn't get bits %llx in register 0x%x, " + "got %llx\n", + (unsigned long long) bits_to_wait_for, + reg_id, (unsigned long long) *valp); + ret = -ENODEV; + break; + } + } while (1); + + return ret; +} + +/** + * ipath_waitfor_mdio_cmdready - wait for last command to complete + * @dd: the infinipath device + * + * Like ipath_waitfor_complete(), but we wait for the CMDVALID bit to go + * away indicating the last command has completed. It doesn't return data + */ +int ipath_waitfor_mdio_cmdready(struct ipath_devdata *dd) +{ + unsigned long timeout; + u64 val; + int ret; + + /* wait a ridiculously long time */ + timeout = jiffies + msecs_to_jiffies(5); + do { + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_mdio); + if (!(val & IPATH_MDIO_CMDVALID)) { + ret = 0; + break; + } + cond_resched(); + if (time_after(jiffies, timeout)) { + ipath_dbg("CMDVALID stuck in mdio reg? (%llx)\n", + (unsigned long long) val); + ret = -ENODEV; + break; + } + } while (1); + + return ret; +} + +void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) +{ + static const char *what[4] = { + [0] = "DOWN", + [INFINIPATH_IBCC_LINKCMD_INIT] = "INIT", + [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED", + [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE" + }; + ipath_cdbg(SMA, "Trying to move unit %u to %s, current ltstate " + "is %s\n", dd->ipath_unit, + what[(which >> INFINIPATH_IBCC_LINKCMD_SHIFT) & + INFINIPATH_IBCC_LINKCMD_MASK], + ipath_ibcstatus_str[ + (ipath_read_kreg64 + (dd, dd->ipath_kregs->kr_ibcstatus) >> + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) & + INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]); + + ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, + dd->ipath_ibcctrl | which); +} + +/** + * ipath_read_kreg64_port - read a device's per-port 64-bit kernel register + * @dd: the infinipath device + * @regno: the register number to read + * @port: the port containing the register + * + * Registers that vary with the chip implementation constants (port) + * use this routine. + */ +u64 ipath_read_kreg64_port(const struct ipath_devdata *dd, ipath_kreg regno, + unsigned port) +{ + u16 where; + + if (port < dd->ipath_portcnt && + (regno == dd->ipath_kregs->kr_rcvhdraddr || + regno == dd->ipath_kregs->kr_rcvhdrtailaddr)) + where = regno + port; + else + where = -1; + + return ipath_read_kreg64(dd, where); +} + +/** + * ipath_write_kreg_port - write a device's per-port 64-bit kernel register + * @dd: the infinipath device + * @regno: the register number to write + * @port: the port containing the register + * @value: the value to write + * + * Registers that vary with the chip implementation constants (port) + * use this routine. + */ +void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno, + unsigned port, u64 value) +{ + u16 where; + + if (port < dd->ipath_portcnt && + (regno == dd->ipath_kregs->kr_rcvhdraddr || + regno == dd->ipath_kregs->kr_rcvhdrtailaddr)) + where = regno + port; + else + where = -1; + + ipath_write_kreg(dd, where, value); +} + +/** + * ipath_shutdown_device - shut down a device + * @dd: the infinipath device + * + * This is called to make the device quiet when we are about to + * unload the driver, and also when the device is administratively + * disabled. It does not free any data structures. + * Everything it does has to be setup again by ipath_init_chip(dd,1) + */ +void ipath_shutdown_device(struct ipath_devdata *dd) +{ + u64 val; + + ipath_dbg("Shutting down the device\n"); + + dd->ipath_flags |= IPATH_LINKUNK; + dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN | + IPATH_LINKINIT | IPATH_LINKARMED | + IPATH_LINKACTIVE); + *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF | + IPATH_STATUS_IB_READY); + + /* mask interrupts, but not errors */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL); + + dd->ipath_rcvctrl = 0; + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + /* + * gracefully stop all sends allowing any in progress to trickle out + * first. + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL); + /* flush it */ + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + /* + * enough for anything that's going to trickle out to have actually + * done so. + */ + udelay(5); + + /* + * abort any armed or launched PIO buffers that didn't go. (self + * clearing). Will cause any packet currently being transmitted to + * go out with an EBP, and may also cause a short packet error on + * the receiver. + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + INFINIPATH_S_ABORT); + + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_DISABLE << + INFINIPATH_IBCC_LINKINITCMD_SHIFT); + + /* + * we are shutting down, so tell the layered driver. We don't do + * this on just a link state change, much like ethernet, a cable + * unplug, etc. doesn't change driver state + */ + ipath_layer_intr(dd, IPATH_LAYER_INT_IF_DOWN); + + /* disable IBC */ + dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); + + /* + * clear SerdesEnable and turn the leds off; do this here because + * we are unloading, so don't count on interrupts to move along + * Turn the LEDs off explictly for the same reason. + */ + dd->ipath_f_quiet_serdes(dd); + dd->ipath_f_setextled(dd, 0, 0); + + if (dd->ipath_stats_timer_active) { + del_timer_sync(&dd->ipath_stats_timer); + dd->ipath_stats_timer_active = 0; + } + + /* + * clear all interrupts and errors, so that the next time the driver + * is loaded or device is enabled, we know that whatever is set + * happened while we were unloaded + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, + ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED); + ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL); + ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL); +} + +/** + * ipath_free_pddata - free a port's allocated data + * @dd: the infinipath device + * @port: the port + * @freehdrq: free the port data structure if true + * + * when closing, free up any allocated data for a port, if the + * reference count goes to zero + * Note: this also optionally frees the portdata itself! + * Any changes here have to be matched up with the reinit case + * of ipath_init_chip(), which calls this routine on reinit after reset. + */ +void ipath_free_pddata(struct ipath_devdata *dd, u32 port, int freehdrq) +{ + struct ipath_portdata *pd = dd->ipath_pd[port]; + + if (!pd) + return; + if (freehdrq) + /* + * only clear and free portdata if we are going to also + * release the hdrq, otherwise we leak the hdrq on each + * open/close cycle + */ + dd->ipath_pd[port] = NULL; + if (freehdrq && pd->port_rcvhdrq) { + ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p " + "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq, + (unsigned long) pd->port_rcvhdrq_size); + dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size, + pd->port_rcvhdrq, pd->port_rcvhdrq_phys); + pd->port_rcvhdrq = NULL; + } + if (port && pd->port_rcvegrbuf) { + /* always free this */ + if (pd->port_rcvegrbuf) { + unsigned e; + + for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) { + void *base = pd->port_rcvegrbuf[e]; + size_t size = pd->port_rcvegrbuf_size; + + ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), " + "chunk %u/%u\n", base, + (unsigned long) size, + e, pd->port_rcvegrbuf_chunks); + dma_free_coherent( + &dd->pcidev->dev, size, base, + pd->port_rcvegrbuf_phys[e]); + } + vfree(pd->port_rcvegrbuf); + pd->port_rcvegrbuf = NULL; + vfree(pd->port_rcvegrbuf_phys); + pd->port_rcvegrbuf_phys = NULL; + } + pd->port_rcvegrbuf_chunks = 0; + } else if (port == 0 && dd->ipath_port0_skbs) { + unsigned e; + struct sk_buff **skbs = dd->ipath_port0_skbs; + + dd->ipath_port0_skbs = NULL; + ipath_cdbg(VERBOSE, "free closed port %d ipath_port0_skbs " + "@ %p\n", pd->port_port, skbs); + for (e = 0; e < dd->ipath_rcvegrcnt; e++) + if (skbs[e]) + dev_kfree_skb(skbs[e]); + vfree(skbs); + } + if (freehdrq) { + kfree(pd->port_tid_pg_list); + kfree(pd); + } +} + +int __init infinipath_init(void) +{ + int ret; + + ipath_dbg(KERN_INFO DRIVER_LOAD_MSG "%s", ipath_core_version); + + /* + * These must be called before the driver is registered with + * the PCI subsystem. + */ + idr_init(&unit_table); + if (!idr_pre_get(&unit_table, GFP_KERNEL)) { + ret = -ENOMEM; + goto bail; + } + + ret = pci_register_driver(&ipath_driver); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME + ": Unable to register driver: error %d\n", -ret); + goto bail_unit; + } + + ret = ipath_driver_create_group(&ipath_driver.driver); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME ": Unable to create driver " + "sysfs entries: error %d\n", -ret); + goto bail_pci; + } + + ret = ipath_init_ipathfs(); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME ": Unable to create " + "ipathfs: error %d\n", -ret); + goto bail_group; + } + + goto bail; + +bail_group: + ipath_driver_remove_group(&ipath_driver.driver); + +bail_pci: + pci_unregister_driver(&ipath_driver); + +bail_unit: + idr_destroy(&unit_table); + +bail: + return ret; +} + +static void cleanup_device(struct ipath_devdata *dd) +{ + int port; + + ipath_shutdown_device(dd); + + if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) { + /* can't do anything more with chip; needs re-init */ + *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT; + if (dd->ipath_kregbase) { + /* + * if we haven't already cleaned up before these are + * to ensure any register reads/writes "fail" until + * re-init + */ + dd->ipath_kregbase = NULL; + dd->ipath_kregvirt = NULL; + dd->ipath_uregbase = 0; + dd->ipath_sregbase = 0; + dd->ipath_cregbase = 0; + dd->ipath_kregsize = 0; + } + ipath_disable_wc(dd); + } + + if (dd->ipath_pioavailregs_dma) { + dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, + (void *) dd->ipath_pioavailregs_dma, + dd->ipath_pioavailregs_phys); + dd->ipath_pioavailregs_dma = NULL; + } + + if (dd->ipath_pageshadow) { + struct page **tmpp = dd->ipath_pageshadow; + int i, cnt = 0; + + ipath_cdbg(VERBOSE, "Unlocking any expTID pages still " + "locked\n"); + for (port = 0; port < dd->ipath_cfgports; port++) { + int port_tidbase = port * dd->ipath_rcvtidcnt; + int maxtid = port_tidbase + dd->ipath_rcvtidcnt; + for (i = port_tidbase; i < maxtid; i++) { + if (!tmpp[i]) + continue; + ipath_release_user_pages(&tmpp[i], 1); + tmpp[i] = NULL; + cnt++; + } + } + if (cnt) { + ipath_stats.sps_pageunlocks += cnt; + ipath_cdbg(VERBOSE, "There were still %u expTID " + "entries locked\n", cnt); + } + if (ipath_stats.sps_pagelocks || + ipath_stats.sps_pageunlocks) + ipath_cdbg(VERBOSE, "%llu pages locked, %llu " + "unlocked via ipath_m{un}lock\n", + (unsigned long long) + ipath_stats.sps_pagelocks, + (unsigned long long) + ipath_stats.sps_pageunlocks); + + ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n", + dd->ipath_pageshadow); + vfree(dd->ipath_pageshadow); + dd->ipath_pageshadow = NULL; + } + + /* + * free any resources still in use (usually just kernel ports) + * at unload + */ + for (port = 0; port < dd->ipath_cfgports; port++) + ipath_free_pddata(dd, port, 1); + kfree(dd->ipath_pd); + /* + * debuggability, in case some cleanup path tries to use it + * after this + */ + dd->ipath_pd = NULL; +} + +static void __exit infinipath_cleanup(void) +{ + struct ipath_devdata *dd, *tmp; + unsigned long flags; + + ipath_exit_ipathfs(); + + ipath_driver_remove_group(&ipath_driver.driver); + + spin_lock_irqsave(&ipath_devs_lock, flags); + + /* + * turn off rcv, send, and interrupts for all ports, all drivers + * should also hard reset the chip here? + * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs + * for all versions of the driver, if they were allocated + */ + list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) { + spin_unlock_irqrestore(&ipath_devs_lock, flags); + + if (dd->ipath_kregbase) + cleanup_device(dd); + + if (dd->pcidev) { + if (dd->pcidev->irq) { + ipath_cdbg(VERBOSE, + "unit %u free_irq of irq %x\n", + dd->ipath_unit, dd->pcidev->irq); + free_irq(dd->pcidev->irq, dd); + } else + ipath_dbg("irq is 0, not doing free_irq " + "for unit %u\n", dd->ipath_unit); + dd->pcidev = NULL; + } + + /* + * we check for NULL here, because it's outside the kregbase + * check, and we need to call it after the free_irq. Thus + * it's possible that the function pointers were never + * initialized. + */ + if (dd->ipath_f_cleanup) + /* clean up chip-specific stuff */ + dd->ipath_f_cleanup(dd); + + spin_lock_irqsave(&ipath_devs_lock, flags); + } + + spin_unlock_irqrestore(&ipath_devs_lock, flags); + + ipath_cdbg(VERBOSE, "Unregistering pci driver\n"); + pci_unregister_driver(&ipath_driver); + + idr_destroy(&unit_table); +} + +/** + * ipath_reset_device - reset the chip if possible + * @unit: the device to reset + * + * Whether or not reset is successful, we attempt to re-initialize the chip + * (that is, much like a driver unload/reload). We clear the INITTED flag + * so that the various entry points will fail until we reinitialize. For + * now, we only allow this if no user ports are open that use chip resources + */ +int ipath_reset_device(int unit) +{ + int ret, i; + struct ipath_devdata *dd = ipath_lookup(unit); + + if (!dd) { + ret = -ENODEV; + goto bail; + } + + dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit); + + if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) { + dev_info(&dd->pcidev->dev, "Invalid unit number %u or " + "not initialized or not present\n", unit); + ret = -ENXIO; + goto bail; + } + + if (dd->ipath_pd) + for (i = 1; i < dd->ipath_portcnt; i++) { + if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) { + ipath_dbg("unit %u port %d is in use " + "(PID %u cmd %s), can't reset\n", + unit, i, + dd->ipath_pd[i]->port_pid, + dd->ipath_pd[i]->port_comm); + ret = -EBUSY; + goto bail; + } + } + + dd->ipath_flags &= ~IPATH_INITTED; + ret = dd->ipath_f_reset(dd); + if (ret != 1) + ipath_dbg("reset was not successful\n"); + ipath_dbg("Trying to reinitialize unit %u after reset attempt\n", + unit); + ret = ipath_init_chip(dd, 1); + if (ret) + ipath_dev_err(dd, "Reinitialize unit %u after " + "reset failed with %d\n", unit, ret); + else + dev_info(&dd->pcidev->dev, "Reinitialized unit %u after " + "resetting\n", unit); + +bail: + return ret; +} + +module_init(infinipath_init); +module_exit(infinipath_cleanup);