From: Harish Zunjarrao Date: Mon, 1 Aug 2011 10:26:16 +0000 (-0700) Subject: [SCSI] qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7c07d139cfec3172e813b468a8a173ad73bb5da9;p=linux-beck.git [SCSI] qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG Signed-off-by: Harish Zunjarrao Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c index de4db299bfcb..c47545356f7b 100644 --- a/drivers/scsi/qla4xxx/ql4_bsg.c +++ b/drivers/scsi/qla4xxx/ql4_bsg.c @@ -196,6 +196,147 @@ leave: return rval; } +static int +qla4xxx_read_nvram(struct bsg_job *bsg_job) +{ + struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); + struct scsi_qla_host *ha = to_qla_host(host); + struct iscsi_bsg_request *bsg_req = bsg_job->request; + struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; + uint32_t offset = 0; + uint32_t len = 0; + uint32_t total_len = 0; + dma_addr_t nvram_dma; + uint8_t *nvram = NULL; + int rval = -EINVAL; + + bsg_reply->reply_payload_rcv_len = 0; + + if (unlikely(pci_channel_offline(ha->pdev))) + goto leave; + + /* Only 40xx adapters are supported */ + if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) + goto leave; + + if (ql4xxx_reset_active(ha)) { + ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); + rval = -EBUSY; + goto leave; + } + + offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; + len = bsg_job->reply_payload.payload_len; + total_len = offset + len; + + /* total len should not be greater than max NVRAM size */ + if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || + ((is_qla4022(ha) || is_qla4032(ha)) && + total_len > QL40X2_NVRAM_SIZE)) { + ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" + " nvram size, offset=%d len=%d\n", + __func__, offset, len); + goto leave; + } + + nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, + GFP_KERNEL); + if (!nvram) { + ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram " + "data\n", __func__); + rval = -ENOMEM; + goto leave; + } + + rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len); + if (rval) { + ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__); + bsg_reply->result = DID_ERROR << 16; + rval = -EIO; + } else { + bsg_reply->reply_payload_rcv_len = + sg_copy_from_buffer(bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, + nvram, len); + bsg_reply->result = DID_OK << 16; + } + + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); + dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); +leave: + return rval; +} + +static int +qla4xxx_update_nvram(struct bsg_job *bsg_job) +{ + struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); + struct scsi_qla_host *ha = to_qla_host(host); + struct iscsi_bsg_request *bsg_req = bsg_job->request; + struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; + uint32_t offset = 0; + uint32_t len = 0; + uint32_t total_len = 0; + dma_addr_t nvram_dma; + uint8_t *nvram = NULL; + int rval = -EINVAL; + + bsg_reply->reply_payload_rcv_len = 0; + + if (unlikely(pci_channel_offline(ha->pdev))) + goto leave; + + if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) + goto leave; + + if (ql4xxx_reset_active(ha)) { + ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); + rval = -EBUSY; + goto leave; + } + + offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; + len = bsg_job->request_payload.payload_len; + total_len = offset + len; + + /* total len should not be greater than max NVRAM size */ + if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || + ((is_qla4022(ha) || is_qla4032(ha)) && + total_len > QL40X2_NVRAM_SIZE)) { + ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" + " nvram size, offset=%d len=%d\n", + __func__, offset, len); + goto leave; + } + + nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, + GFP_KERNEL); + if (!nvram) { + ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " + "data\n", __func__); + rval = -ENOMEM; + goto leave; + } + + sg_copy_to_buffer(bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, nvram, len); + + rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len); + if (rval) { + ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); + bsg_reply->result = DID_ERROR << 16; + rval = -EIO; + } else + bsg_reply->result = DID_OK << 16; + + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); + dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); +leave: + return rval; +} + /** * qla4xxx_process_vendor_specific - handle vendor specific bsg request * @job: iscsi_bsg_job to handle @@ -217,6 +358,12 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job) case QLISCSI_VND_GET_ACB_STATE: return qla4xxx_get_acb_state(bsg_job); + case QLISCSI_VND_READ_NVRAM: + return qla4xxx_read_nvram(bsg_job); + + case QLISCSI_VND_UPDATE_NVRAM: + return qla4xxx_update_nvram(bsg_job); + default: ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: " "0x%x\n", __func__, bsg_req->msgcode); diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h index 0400e1a0b670..71df80d612da 100644 --- a/drivers/scsi/qla4xxx/ql4_bsg.h +++ b/drivers/scsi/qla4xxx/ql4_bsg.h @@ -11,5 +11,7 @@ #define QLISCSI_VND_READ_FLASH 1 #define QLISCSI_VND_UPDATE_FLASH 2 #define QLISCSI_VND_GET_ACB_STATE 3 +#define QLISCSI_VND_READ_NVRAM 4 +#define QLISCSI_VND_UPDATE_NVRAM 5 #endif diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 9dc439b0d75f..581ff7e4621c 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -201,6 +201,9 @@ static inline uint32_t clr_rmask(uint32_t val) /* ISP 4022 nvram definitions */ #define NVR_WRITE_ENABLE 0x00000010 /* 4022 */ +#define QL4010_NVRAM_SIZE 0x200 +#define QL40X2_NVRAM_SIZE 0x800 + /* ISP port_status definitions */ /* ISP Semaphore definitions */ @@ -359,6 +362,8 @@ struct qla_flt_region { #define MBOX_CMD_GET_FW_STATE 0x0069 #define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A #define MBOX_CMD_GET_SYS_INFO 0x0078 +#define MBOX_CMD_GET_NVRAM 0x0078 /* For 40xx */ +#define MBOX_CMD_SET_NVRAM 0x0079 /* For 40xx */ #define MBOX_CMD_RESTORE_FACTORY_DEFAULTS 0x0087 #define MBOX_CMD_SET_ACB 0x0088 #define MBOX_CMD_GET_ACB 0x0089 diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 5c8769651666..35bd0c1ede38 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -162,6 +162,10 @@ int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha, dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index); int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password, uint16_t idx); +int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, + uint32_t offset, uint32_t size); +int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, + uint32_t offset, uint32_t size); /* BSG Functions */ int qla4xxx_bsg_request(struct bsg_job *bsg_job); diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index aec72309f60f..011c822f5ff6 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1690,3 +1690,55 @@ int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx, memcpy(sts, mbox_sts, sizeof(mbox_sts)); return status; } + +int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, + uint32_t offset, uint32_t size) +{ + int status = QLA_SUCCESS; + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + mbox_cmd[0] = MBOX_CMD_GET_NVRAM; + mbox_cmd[1] = LSDW(nvram_dma); + mbox_cmd[2] = MSDW(nvram_dma); + mbox_cmd[3] = offset; + mbox_cmd[4] = size; + + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], + &mbox_sts[0]); + if (status != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " + "status %04X\n", ha->host_no, __func__, + mbox_sts[0])); + } + return status; +} + +int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, + uint32_t offset, uint32_t size) +{ + int status = QLA_SUCCESS; + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + mbox_cmd[0] = MBOX_CMD_SET_NVRAM; + mbox_cmd[1] = LSDW(nvram_dma); + mbox_cmd[2] = MSDW(nvram_dma); + mbox_cmd[3] = offset; + mbox_cmd[4] = size; + + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], + &mbox_sts[0]); + if (status != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " + "status %04X\n", ha->host_no, __func__, + mbox_sts[0])); + } + return status; +}