From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 21:17:14 +0000 (+0100) Subject: sc1200: remove pointless hwif lookup loop X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7c0e26661dd104aaeb1391063cc986ddc0ac4aa4;p=mv-sheeva.git sc1200: remove pointless hwif lookup loop Save PCI regs values for both IDE ports in one buffer, in order to eliminate a needless and ugly loop across all hwifs, searching for our PCI device. Partially based on the previous patch by Jeff Garzik. Cc: Jeff Garzik Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 707d5ff66b0..f0029b364c5 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -260,66 +260,39 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) } #ifdef CONFIG_PM -static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev) -{ - int h; - - for (h = 0; h < MAX_HWIFS; h++) { - ide_hwif_t *hwif = &ide_hwifs[h]; - if (prev) { - if (hwif == prev) - prev = NULL; // found previous, now look for next match - } else { - if (hwif && hwif->pci_dev == dev) - return hwif; // found next match - } - } - return NULL; // not found -} - -typedef struct sc1200_saved_state_s { - __u32 regs[4]; -} sc1200_saved_state_t; - +struct sc1200_saved_state { + u32 regs[8]; +}; static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) { - ide_hwif_t *hwif = NULL; - printk("SC1200: suspend(%u)\n", state.event); + /* + * we only save state when going from full power to less + */ if (state.event == PM_EVENT_ON) { - // we only save state when going from full power to less - - // - // Loop over all interfaces that are part of this PCI device: - // - while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { - sc1200_saved_state_t *ss; - unsigned int basereg, r; - // - // allocate a permanent save area, if not already allocated - // - ss = (sc1200_saved_state_t *)hwif->config_data; - if (ss == NULL) { - ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL); - if (ss == NULL) - return -ENOMEM; - hwif->config_data = (unsigned long)ss; - } - ss = (sc1200_saved_state_t *)hwif->config_data; - // - // Save timing registers: this may be unnecessary if - // BIOS also does it - // - basereg = hwif->channel ? 0x50 : 0x40; - for (r = 0; r < 4; ++r) { - pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]); - } + struct sc1200_saved_state *ss; + unsigned int r; + + /* + * allocate a permanent save area, if not already allocated + */ + ss = (struct sc1200_saved_state *)pci_get_drvdata(dev); + if (ss == NULL) { + ss = kmalloc(sizeof(*ss), GFP_KERNEL); + if (ss == NULL) + return -ENOMEM; + pci_set_drvdata(dev, ss); } - } - /* You don't need to iterate over disks -- sysfs should have done that for you already */ + /* + * save timing registers + * (this may be unnecessary if BIOS also does it) + */ + for (r = 0; r < 8; r++) + pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]); + } pci_disable_device(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); @@ -328,30 +301,25 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) static int sc1200_resume (struct pci_dev *dev) { - ide_hwif_t *hwif = NULL; - int i; + struct sc1200_saved_state *ss; + unsigned int r; + int i; i = pci_enable_device(dev); if (i) return i; - // - // loop over all interfaces that are part of this pci device: - // - while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { - unsigned int basereg, r; - sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data; - - // - // Restore timing registers: this may be unnecessary if BIOS also does it - // - basereg = hwif->channel ? 0x50 : 0x40; - if (ss != NULL) { - for (r = 0; r < 4; ++r) { - pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]); - } - } + ss = (struct sc1200_saved_state *)pci_get_drvdata(dev); + + /* + * restore timing registers + * (this may be unnecessary if BIOS also does it) + */ + if (ss) { + for (r = 0; r < 8; r++) + pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]); } + return 0; } #endif