From: Tony Lindgren Date: Thu, 18 Sep 2014 16:03:36 +0000 (-0700) Subject: ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7c1babdcee6a99fcc61a9403b4c24baa6ef7cf1f;p=linux-beck.git ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs This is no longer needed as the device specific wake-up event can now be specified with interrupts-extended property where the second interrupt is the pinctrl-single register, such as the UART3 RX pin. Note that twl4030_omap3.dtsi needs to set WAKEUPENABLE for off-idle to properly trigger the PMIC scripts. And GPIO pins still need to set WAKEUPENABLE for wake-up events. Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1becefce821b..06a8aec4e6ea 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -174,8 +174,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; };