From: Leo Kim Date: Fri, 6 Nov 2015 02:19:56 +0000 (+0900) Subject: staging: wilc1000: wilc_wlan.h: alignment defines X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7cf241a1cdb481b14e4d55e10d4b45f78aa41df4;p=linux-beck.git staging: wilc1000: wilc_wlan.h: alignment defines This patch fixes alignment of defines. Signed-off-by: Leo Kim Signed-off-by: Glen Lee Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/wilc1000/wilc_wlan.h b/drivers/staging/wilc1000/wilc_wlan.h index ff852b4c2763..ba7063020417 100644 --- a/drivers/staging/wilc1000/wilc_wlan.h +++ b/drivers/staging/wilc1000/wilc_wlan.h @@ -3,7 +3,7 @@ -#define ISWILC1000(id) (((id & 0xfffff000) == 0x100000) ? 1 : 0) +#define ISWILC1000(id) ((id & 0xfffff000) == 0x100000 ? 1 : 0) /******************************************** @@ -11,27 +11,30 @@ * Mac eth header length * ********************************************/ -#define DRIVER_HANDLER_SIZE 4 -#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */ -#define SUB_MSDU_HEADER_LENGTH 14 -#define SNAP_HDR_LEN 8 -#define ETHERNET_HDR_LEN 14 -#define WORD_ALIGNMENT_PAD 0 - -#define ETH_ETHERNET_HDR_OFFSET (MAX_MAC_HDR_LEN + SUB_MSDU_HEADER_LENGTH + \ - SNAP_HDR_LEN - ETHERNET_HDR_LEN + WORD_ALIGNMENT_PAD) - -#define HOST_HDR_OFFSET 4 -#define ETHERNET_HDR_LEN 14 -#define IP_HDR_LEN 20 -#define IP_HDR_OFFSET ETHERNET_HDR_LEN -#define UDP_HDR_OFFSET (IP_HDR_LEN + IP_HDR_OFFSET) -#define UDP_HDR_LEN 8 -#define UDP_DATA_OFFSET (UDP_HDR_OFFSET + UDP_HDR_LEN) -#define ETH_CONFIG_PKT_HDR_LEN UDP_DATA_OFFSET - -#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \ - ETH_CONFIG_PKT_HDR_LEN) +#define DRIVER_HANDLER_SIZE 4 +#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */ +#define SUB_MSDU_HEADER_LENGTH 14 +#define SNAP_HDR_LEN 8 +#define ETHERNET_HDR_LEN 14 +#define WORD_ALIGNMENT_PAD 0 + +#define ETH_ETHERNET_HDR_OFFSET (MAX_MAC_HDR_LEN + \ + SUB_MSDU_HEADER_LENGTH + \ + SNAP_HDR_LEN - \ + ETHERNET_HDR_LEN + \ + WORD_ALIGNMENT_PAD) + +#define HOST_HDR_OFFSET 4 +#define ETHERNET_HDR_LEN 14 +#define IP_HDR_LEN 20 +#define IP_HDR_OFFSET ETHERNET_HDR_LEN +#define UDP_HDR_OFFSET (IP_HDR_LEN + IP_HDR_OFFSET) +#define UDP_HDR_LEN 8 +#define UDP_DATA_OFFSET (UDP_HDR_OFFSET + UDP_HDR_LEN) +#define ETH_CONFIG_PKT_HDR_LEN UDP_DATA_OFFSET + +#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \ + ETH_CONFIG_PKT_HDR_LEN) /******************************************** * @@ -39,91 +42,92 @@ * ********************************************/ -#define BYTE_SWAP(val) ((((val) & 0x000000FF) << 24) + \ - (((val) & 0x0000FF00) << 8) + \ - (((val) & 0x00FF0000) >> 8) + \ - (((val) & 0xFF000000) >> 24)) +#define BYTE_SWAP(val) (((val & 0x000000FF) << 24) + \ + ((val & 0x0000FF00) << 8) + \ + ((val & 0x00FF0000) >> 8) + \ + ((val & 0xFF000000) >> 24)) /******************************************** * * Register Defines * ********************************************/ -#define WILC_PERIPH_REG_BASE 0x1000 -#define WILC_CHANGING_VIR_IF (0x108c) -#define WILC_CHIPID (WILC_PERIPH_REG_BASE) -#define WILC_GLB_RESET_0 (WILC_PERIPH_REG_BASE + 0x400) -#define WILC_PIN_MUX_0 (WILC_PERIPH_REG_BASE + 0x408) -#define WILC_HOST_TX_CTRL (WILC_PERIPH_REG_BASE + 0x6c) -#define WILC_HOST_RX_CTRL_0 (WILC_PERIPH_REG_BASE + 0x70) -#define WILC_HOST_RX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x74) -#define WILC_HOST_VMM_CTL (WILC_PERIPH_REG_BASE + 0x78) -#define WILC_HOST_RX_CTRL (WILC_PERIPH_REG_BASE + 0x80) -#define WILC_HOST_RX_EXTRA_SIZE (WILC_PERIPH_REG_BASE + 0x84) -#define WILC_HOST_TX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x88) -#define WILC_MISC (WILC_PERIPH_REG_BASE + 0x428) -#define WILC_INTR_REG_BASE (WILC_PERIPH_REG_BASE + 0xa00) -#define WILC_INTR_ENABLE (WILC_INTR_REG_BASE) -#define WILC_INTR2_ENABLE (WILC_INTR_REG_BASE + 4) - -#define WILC_INTR_POLARITY (WILC_INTR_REG_BASE + 0x10) -#define WILC_INTR_TYPE (WILC_INTR_REG_BASE + 0x20) -#define WILC_INTR_CLEAR (WILC_INTR_REG_BASE + 0x30) -#define WILC_INTR_STATUS (WILC_INTR_REG_BASE + 0x40) - -#define WILC_VMM_TBL_SIZE 64 -#define WILC_VMM_TX_TBL_BASE (0x150400) -#define WILC_VMM_RX_TBL_BASE (0x150500) - -#define WILC_VMM_BASE 0x150000 -#define WILC_VMM_CORE_CTL (WILC_VMM_BASE) -#define WILC_VMM_TBL_CTL (WILC_VMM_BASE + 0x4) -#define WILC_VMM_TBL_ENTRY (WILC_VMM_BASE + 0x8) -#define WILC_VMM_TBL0_SIZE (WILC_VMM_BASE + 0xc) -#define WILC_VMM_TO_HOST_SIZE (WILC_VMM_BASE + 0x10) -#define WILC_VMM_CORE_CFG (WILC_VMM_BASE + 0x14) -#define WILC_VMM_TBL_ACTIVE (WILC_VMM_BASE + 040) -#define WILC_VMM_TBL_STATUS (WILC_VMM_BASE + 0x44) - -#define WILC_SPI_REG_BASE 0xe800 -#define WILC_SPI_CTL (WILC_SPI_REG_BASE) -#define WILC_SPI_MASTER_DMA_ADDR (WILC_SPI_REG_BASE + 0x4) -#define WILC_SPI_MASTER_DMA_COUNT (WILC_SPI_REG_BASE + 0x8) -#define WILC_SPI_SLAVE_DMA_ADDR (WILC_SPI_REG_BASE + 0xc) -#define WILC_SPI_SLAVE_DMA_COUNT (WILC_SPI_REG_BASE + 0x10) -#define WILC_SPI_TX_MODE (WILC_SPI_REG_BASE + 0x20) -#define WILC_SPI_PROTOCOL_CONFIG (WILC_SPI_REG_BASE + 0x24) -#define WILC_SPI_INTR_CTL (WILC_SPI_REG_BASE + 0x2c) - -#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - WILC_SPI_REG_BASE) - -#define WILC_AHB_DATA_MEM_BASE 0x30000 -#define WILC_AHB_SHARE_MEM_BASE 0xd0000 - -#define WILC_VMM_TBL_RX_SHADOW_BASE WILC_AHB_SHARE_MEM_BASE -#define WILC_VMM_TBL_RX_SHADOW_SIZE (256) - -#define WILC_GP_REG_0 0x149c -#define WILC_GP_REG_1 0x14a0 - -#define rHAVE_SDIO_IRQ_GPIO_BIT (0) -#define rHAVE_USE_PMU_BIT (1) -#define rHAVE_SLEEP_CLK_SRC_RTC_BIT (2) -#define rHAVE_SLEEP_CLK_SRC_XO_BIT (3) -#define rHAVE_EXT_PA_INV_TX_RX_BIT (4) -#define rHAVE_LEGACY_RF_SETTINGS_BIT (5) -#define rHAVE_XTAL_24_BIT (6) -#define rHAVE_DISABLE_WILC_UART_BIT (7) - - -#define WILC_HAVE_SDIO_IRQ_GPIO (1 << rHAVE_SDIO_IRQ_GPIO_BIT) -#define WILC_HAVE_USE_PMU (1 << rHAVE_USE_PMU_BIT) -#define WILC_HAVE_SLEEP_CLK_SRC_RTC (1 << rHAVE_SLEEP_CLK_SRC_RTC_BIT) -#define WILC_HAVE_SLEEP_CLK_SRC_XO (1 << rHAVE_SLEEP_CLK_SRC_XO_BIT) -#define WILC_HAVE_EXT_PA_INV_TX_RX (1 << rHAVE_EXT_PA_INV_TX_RX_BIT) -#define WILC_HAVE_LEGACY_RF_SETTINGS (1 << rHAVE_LEGACY_RF_SETTINGS_BIT) -#define WILC_HAVE_XTAL_24 (1 << rHAVE_XTAL_24_BIT) -#define WILC_HAVE_DISABLE_WILC_UART (1 << rHAVE_DISABLE_WILC_UART_BIT) +#define WILC_PERIPH_REG_BASE 0x1000 +#define WILC_CHANGING_VIR_IF 0x108c +#define WILC_CHIPID WILC_PERIPH_REG_BASE +#define WILC_GLB_RESET_0 (WILC_PERIPH_REG_BASE + 0x400) +#define WILC_PIN_MUX_0 (WILC_PERIPH_REG_BASE + 0x408) +#define WILC_HOST_TX_CTRL (WILC_PERIPH_REG_BASE + 0x6c) +#define WILC_HOST_RX_CTRL_0 (WILC_PERIPH_REG_BASE + 0x70) +#define WILC_HOST_RX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x74) +#define WILC_HOST_VMM_CTL (WILC_PERIPH_REG_BASE + 0x78) +#define WILC_HOST_RX_CTRL (WILC_PERIPH_REG_BASE + 0x80) +#define WILC_HOST_RX_EXTRA_SIZE (WILC_PERIPH_REG_BASE + 0x84) +#define WILC_HOST_TX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x88) +#define WILC_MISC (WILC_PERIPH_REG_BASE + 0x428) +#define WILC_INTR_REG_BASE (WILC_PERIPH_REG_BASE + 0xa00) +#define WILC_INTR_ENABLE WILC_INTR_REG_BASE +#define WILC_INTR2_ENABLE (WILC_INTR_REG_BASE + 4) + +#define WILC_INTR_POLARITY (WILC_INTR_REG_BASE + 0x10) +#define WILC_INTR_TYPE (WILC_INTR_REG_BASE + 0x20) +#define WILC_INTR_CLEAR (WILC_INTR_REG_BASE + 0x30) +#define WILC_INTR_STATUS (WILC_INTR_REG_BASE + 0x40) + +#define WILC_VMM_TBL_SIZE 64 +#define WILC_VMM_TX_TBL_BASE 0x150400 +#define WILC_VMM_RX_TBL_BASE 0x150500 + +#define WILC_VMM_BASE 0x150000 +#define WILC_VMM_CORE_CTL WILC_VMM_BASE +#define WILC_VMM_TBL_CTL (WILC_VMM_BASE + 0x4) +#define WILC_VMM_TBL_ENTRY (WILC_VMM_BASE + 0x8) +#define WILC_VMM_TBL0_SIZE (WILC_VMM_BASE + 0xc) +#define WILC_VMM_TO_HOST_SIZE (WILC_VMM_BASE + 0x10) +#define WILC_VMM_CORE_CFG (WILC_VMM_BASE + 0x14) +#define WILC_VMM_TBL_ACTIVE (WILC_VMM_BASE + 040) +#define WILC_VMM_TBL_STATUS (WILC_VMM_BASE + 0x44) + +#define WILC_SPI_REG_BASE 0xe800 +#define WILC_SPI_CTL WILC_SPI_REG_BASE +#define WILC_SPI_MASTER_DMA_ADDR (WILC_SPI_REG_BASE + 0x4) +#define WILC_SPI_MASTER_DMA_COUNT (WILC_SPI_REG_BASE + 0x8) +#define WILC_SPI_SLAVE_DMA_ADDR (WILC_SPI_REG_BASE + 0xc) +#define WILC_SPI_SLAVE_DMA_COUNT (WILC_SPI_REG_BASE + 0x10) +#define WILC_SPI_TX_MODE (WILC_SPI_REG_BASE + 0x20) +#define WILC_SPI_PROTOCOL_CONFIG (WILC_SPI_REG_BASE + 0x24) +#define WILC_SPI_INTR_CTL (WILC_SPI_REG_BASE + 0x2c) + +#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - \ + WILC_SPI_REG_BASE) + +#define WILC_AHB_DATA_MEM_BASE 0x30000 +#define WILC_AHB_SHARE_MEM_BASE 0xd0000 + +#define WILC_VMM_TBL_RX_SHADOW_BASE WILC_AHB_SHARE_MEM_BASE +#define WILC_VMM_TBL_RX_SHADOW_SIZE 256 + +#define WILC_GP_REG_0 0x149c +#define WILC_GP_REG_1 0x14a0 + +#define rHAVE_SDIO_IRQ_GPIO_BIT 0 +#define rHAVE_USE_PMU_BIT 1 +#define rHAVE_SLEEP_CLK_SRC_RTC_BIT 2 +#define rHAVE_SLEEP_CLK_SRC_XO_BIT 3 +#define rHAVE_EXT_PA_INV_TX_RX_BIT 4 +#define rHAVE_LEGACY_RF_SETTINGS_BIT 5 +#define rHAVE_XTAL_24_BIT 6 +#define rHAVE_DISABLE_WILC_UART_BIT 7 + + +#define WILC_HAVE_SDIO_IRQ_GPIO (1 << rHAVE_SDIO_IRQ_GPIO_BIT) +#define WILC_HAVE_USE_PMU (1 << rHAVE_USE_PMU_BIT) +#define WILC_HAVE_SLEEP_CLK_SRC_RTC (1 << rHAVE_SLEEP_CLK_SRC_RTC_BIT) +#define WILC_HAVE_SLEEP_CLK_SRC_XO (1 << rHAVE_SLEEP_CLK_SRC_XO_BIT) +#define WILC_HAVE_EXT_PA_INV_TX_RX (1 << rHAVE_EXT_PA_INV_TX_RX_BIT) +#define WILC_HAVE_LEGACY_RF_SETTINGS (1 << rHAVE_LEGACY_RF_SETTINGS_BIT) +#define WILC_HAVE_XTAL_24 (1 << rHAVE_XTAL_24_BIT) +#define WILC_HAVE_DISABLE_WILC_UART (1 << rHAVE_DISABLE_WILC_UART_BIT) /******************************************** @@ -131,25 +135,25 @@ * Wlan Defines * ********************************************/ -#define WILC_CFG_PKT 1 -#define WILC_NET_PKT 0 -#define WILC_MGMT_PKT 2 +#define WILC_CFG_PKT 1 +#define WILC_NET_PKT 0 +#define WILC_MGMT_PKT 2 -#define WILC_CFG_SET 1 -#define WILC_CFG_QUERY 0 +#define WILC_CFG_SET 1 +#define WILC_CFG_QUERY 0 -#define WILC_CFG_RSP 1 -#define WILC_CFG_RSP_STATUS 2 -#define WILC_CFG_RSP_SCAN 3 +#define WILC_CFG_RSP 1 +#define WILC_CFG_RSP_STATUS 2 +#define WILC_CFG_RSP_SCAN 3 #ifdef WILC_SDIO -#define WILC_PLL_TO 4 +#define WILC_PLL_TO 4 #else -#define WILC_PLL_TO 2 +#define WILC_PLL_TO 2 #endif -#define ABORT_INT BIT(31) +#define ABORT_INT BIT(31) /*******************************************/ /* E0 and later Interrupt flags. */ @@ -165,15 +169,15 @@ /* 20: INT4 flag */ /* 21: INT5 flag */ /*******************************************/ -#define IRG_FLAGS_OFFSET 16 -#define IRQ_DMA_WD_CNT_MASK ((1ul << IRG_FLAGS_OFFSET) - 1) -#define INT_0 (1 << (IRG_FLAGS_OFFSET)) -#define INT_1 (1 << (IRG_FLAGS_OFFSET + 1)) -#define INT_2 (1 << (IRG_FLAGS_OFFSET + 2)) -#define INT_3 (1 << (IRG_FLAGS_OFFSET + 3)) -#define INT_4 (1 << (IRG_FLAGS_OFFSET + 4)) -#define INT_5 (1 << (IRG_FLAGS_OFFSET + 5)) -#define MAX_NUM_INT (6) +#define IRG_FLAGS_OFFSET 16 +#define IRQ_DMA_WD_CNT_MASK ((1ul << IRG_FLAGS_OFFSET) - 1) +#define INT_0 (1 << IRG_FLAGS_OFFSET) +#define INT_1 (1 << (IRG_FLAGS_OFFSET + 1)) +#define INT_2 (1 << (IRG_FLAGS_OFFSET + 2)) +#define INT_3 (1 << (IRG_FLAGS_OFFSET + 3)) +#define INT_4 (1 << (IRG_FLAGS_OFFSET + 4)) +#define INT_5 (1 << (IRG_FLAGS_OFFSET + 5)) +#define MAX_NUM_INT 6 /*******************************************/ /* E0 and later Interrupt flags. */ @@ -188,28 +192,28 @@ /* 7: Select VMM table 2 */ /* 8: Enable VMM */ /*******************************************/ -#define CLR_INT0 BIT(0) -#define CLR_INT1 BIT(1) -#define CLR_INT2 BIT(2) -#define CLR_INT3 BIT(3) -#define CLR_INT4 BIT(4) -#define CLR_INT5 BIT(5) -#define SEL_VMM_TBL0 BIT(6) -#define SEL_VMM_TBL1 BIT(7) -#define EN_VMM BIT(8) - -#define DATA_INT_EXT INT_0 -#define PLL_INT_EXT INT_1 -#define SLEEP_INT_EXT INT_2 -#define ALL_INT_EXT (DATA_INT_EXT | PLL_INT_EXT | SLEEP_INT_EXT) -#define NUM_INT_EXT (3) - -#define DATA_INT_CLR CLR_INT0 -#define PLL_INT_CLR CLR_INT1 -#define SLEEP_INT_CLR CLR_INT2 - -#define ENABLE_RX_VMM (SEL_VMM_TBL1 | EN_VMM) -#define ENABLE_TX_VMM (SEL_VMM_TBL0 | EN_VMM) +#define CLR_INT0 BIT(0) +#define CLR_INT1 BIT(1) +#define CLR_INT2 BIT(2) +#define CLR_INT3 BIT(3) +#define CLR_INT4 BIT(4) +#define CLR_INT5 BIT(5) +#define SEL_VMM_TBL0 BIT(6) +#define SEL_VMM_TBL1 BIT(7) +#define EN_VMM BIT(8) + +#define DATA_INT_EXT INT_0 +#define PLL_INT_EXT INT_1 +#define SLEEP_INT_EXT INT_2 +#define ALL_INT_EXT (DATA_INT_EXT | PLL_INT_EXT | SLEEP_INT_EXT) +#define NUM_INT_EXT 3 + +#define DATA_INT_CLR CLR_INT0 +#define PLL_INT_CLR CLR_INT1 +#define SLEEP_INT_CLR CLR_INT2 + +#define ENABLE_RX_VMM (SEL_VMM_TBL1 | EN_VMM) +#define ENABLE_TX_VMM (SEL_VMM_TBL0 | EN_VMM) /*time for expiring the semaphores of cfg packets*/ @@ -276,7 +280,7 @@ typedef struct { * ********************************************/ -#define MAX_CFG_FRAME_SIZE 1468 +#define MAX_CFG_FRAME_SIZE 1468 typedef struct { u8 ether_header[14];