From: Fabio Estevam Date: Thu, 7 Feb 2013 01:47:25 +0000 (-0200) Subject: ARM: mxs: Select ARM_CPU_SUSPEND X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7d07cc84944bc5ca14736f639158b87943d5c407;p=linux-beck.git ARM: mxs: Select ARM_CPU_SUSPEND Select ARM_CPU_SUSPEND so that suspend/resume can be tested on mxs platforms. Tested on a mx28evk board: $ echo enabled > /sys/devices/80000000.apb/80040000.apbx/80074000.serial/tty/ttyAMA0/power/wakeup $ echo mem > /sys/power/state [ 507.040000] PM: Syncing filesystems ... done. [ 507.060000] mmc0: card e624 removed [ 507.160000] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 507.180000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 507.200000] Suspending console(s) (use no_console_suspend to debug) (Then send any character via DUART to wakeup the system). [ 507.220000] PM: suspend of devices complete after 10.468 msecs [ 507.220000] PM: late suspend of devices complete after 3.531 msecs [ 507.230000] PM: noirq suspend of devices complete after 5.187 msecs [ 507.230000] PM: noirq resume of devices complete after 2.312 msecs [ 507.230000] PM: early resume of devices complete after 2.437 msecs [ 507.320000] PM: resume of devices complete after 81.312 msecs [ 507.360000] Restarting tasks ... done. [ 507.530000] mmc0: new SDHC card at address e624 [ 507.550000] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 507.560000] mmcblk0: p1 p2 p3 [ 509.240000] libphy: 800f0000.etherne:01 - Link is Down [ 511.240000] libphy: 800f0000.etherne:01 - Link is Up Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ecc431909d6f..c4495a13751a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -3,6 +3,7 @@ if ARCH_MXS config SOC_IMX23 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX23 @@ -10,6 +11,7 @@ config SOC_IMX23 config SOC_IMX28 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM