From: William Breathitt Gray Date: Mon, 30 Jan 2017 17:16:04 +0000 (-0500) Subject: iio: stx104: Add support for GPIO names X-Git-Tag: v4.11-rc1~116^2~223^2~2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7d816e54b847b1e9e7357bf890a03a00f2025381;p=karo-tx-linux.git iio: stx104: Add support for GPIO names This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the Apex Embedded Systems STX104. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c index fcfad51cc4fb..40c05df218f8 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/adc/stx104.c @@ -256,6 +256,11 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, spin_unlock_irqrestore(&stx104gpio->lock, flags); } +#define STX104_NGPIO 8 +static const char *stx104_names[STX104_NGPIO] = { + "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" +}; + static int stx104_probe(struct device *dev, unsigned int id) { struct iio_dev *indio_dev; @@ -309,7 +314,8 @@ static int stx104_probe(struct device *dev, unsigned int id) stx104gpio->chip.parent = dev; stx104gpio->chip.owner = THIS_MODULE; stx104gpio->chip.base = -1; - stx104gpio->chip.ngpio = 8; + stx104gpio->chip.ngpio = STX104_NGPIO; + stx104gpio->chip.names = stx104_names; stx104gpio->chip.get_direction = stx104_gpio_get_direction; stx104gpio->chip.direction_input = stx104_gpio_direction_input; stx104gpio->chip.direction_output = stx104_gpio_direction_output;