From: Gavin Shan Date: Wed, 15 Jan 2014 05:16:11 +0000 (+0800) Subject: powerpc/eeh: Handle multiple EEH errors X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7e4e7867b1e551b7b8f326da3604c47332972bc6;p=linux-beck.git powerpc/eeh: Handle multiple EEH errors For one PCI error relevant OPAL event, we possibly have multiple EEH errors for that. For example, multiple frozen PEs detected on different PHBs. Unfortunately, we didn't cover the case. The patch enumarates the return value from eeh_ops::next_error() and change eeh_handle_special_event() and eeh_ops::next_error() to handle all existing EEH errors. As Ben pointed out, we needn't list_for_each_entry_safe() since we are not deleting any PHB from the hose_list and the EEH serialized lock should be held while purging EEH events. The patch covers those suggestions as well. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 8b4b8e4a5c32..9e39ceb1d19f 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -118,6 +118,16 @@ static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev) return edev ? edev->pdev : NULL; } +/* Return values from eeh_ops::next_error */ +enum { + EEH_NEXT_ERR_NONE = 0, + EEH_NEXT_ERR_INF, + EEH_NEXT_ERR_FROZEN_PE, + EEH_NEXT_ERR_FENCED_PHB, + EEH_NEXT_ERR_DEAD_PHB, + EEH_NEXT_ERR_DEAD_IOC +}; + /* * The struct is used to trace the registered EEH operation * callback functions. Actually, those operation callback diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 7db39203a073..baa3b06e6dab 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -630,84 +630,90 @@ static void eeh_handle_special_event(void) { struct eeh_pe *pe, *phb_pe; struct pci_bus *bus; - struct pci_controller *hose, *tmp; + struct pci_controller *hose; unsigned long flags; - int rc = 0; + int rc; - /* - * The return value from next_error() has been classified as follows. - * It might be good to enumerate them. However, next_error() is only - * supported by PowerNV platform for now. So it would be fine to use - * integer directly: - * - * 4 - Dead IOC 3 - Dead PHB - * 2 - Fenced PHB 1 - Frozen PE - * 0 - No error found - * - */ - rc = eeh_ops->next_error(&pe); - if (rc <= 0) - return; - switch (rc) { - case 4: - /* Mark all PHBs in dead state */ - eeh_serialize_lock(&flags); - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe) continue; - - eeh_pe_state_mark(phb_pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + do { + rc = eeh_ops->next_error(&pe); + + switch (rc) { + case EEH_NEXT_ERR_DEAD_IOC: + /* Mark all PHBs in dead state */ + eeh_serialize_lock(&flags); + + /* Purge all events */ + eeh_remove_event(NULL); + + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) continue; + + eeh_pe_state_mark(phb_pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + } + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_FROZEN_PE: + case EEH_NEXT_ERR_FENCED_PHB: + case EEH_NEXT_ERR_DEAD_PHB: + /* Mark the PE in fenced state */ + eeh_serialize_lock(&flags); + + /* Purge all events of the PHB */ + eeh_remove_event(pe); + + if (rc == EEH_NEXT_ERR_DEAD_PHB) + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + else + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_RECOVERING); + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_NONE: + return; + default: + pr_warn("%s: Invalid value %d from next_error()\n", + __func__, rc); + return; } - eeh_serialize_unlock(flags); - - /* Purge all events */ - eeh_remove_event(NULL); - break; - case 3: - case 2: - case 1: - /* Mark the PE in fenced state */ - eeh_serialize_lock(&flags); - if (rc == 3) - eeh_pe_state_mark(pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); - else - eeh_pe_state_mark(pe, - EEH_PE_ISOLATED | EEH_PE_RECOVERING); - eeh_serialize_unlock(flags); - - /* Purge all events of the PHB */ - eeh_remove_event(pe); - break; - default: - pr_err("%s: Invalid value %d from next_error()\n", - __func__, rc); - return; - } - /* - * For fenced PHB and frozen PE, it's handled as normal - * event. We have to remove the affected PHBs for dead - * PHB and IOC - */ - if (rc == 2 || rc == 1) - eeh_handle_normal_event(pe); - else { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD)) - continue; - - bus = eeh_pe_bus_get(phb_pe); - /* Notify all devices that they're about to go down. */ - eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); - pcibios_remove_pci_devices(bus); + /* + * For fenced PHB and frozen PE, it's handled as normal + * event. We have to remove the affected PHBs for dead + * PHB and IOC + */ + if (rc == EEH_NEXT_ERR_FROZEN_PE || + rc == EEH_NEXT_ERR_FENCED_PHB) { + eeh_handle_normal_event(pe); + } else { + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || + !(phb_pe->state & EEH_PE_PHB_DEAD)) + continue; + + /* Notify all devices to be down */ + bus = eeh_pe_bus_get(phb_pe); + eeh_pe_dev_traverse(pe, + eeh_report_failure, NULL); + pcibios_remove_pci_devices(bus); + } } - } + + /* + * If we have detected dead IOC, we needn't proceed + * any more since all PHBs would have been removed + */ + if (rc == EEH_NEXT_ERR_DEAD_IOC) + break; + } while (rc != EEH_NEXT_ERR_NONE); } /** diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 007ac4989841..8dd16f4675a2 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -735,12 +735,12 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, */ static int ioda_eeh_next_error(struct eeh_pe **pe) { - struct pci_controller *hose, *tmp; + struct pci_controller *hose; struct pnv_phb *phb; u64 frozen_pe_no; u16 err_type, severity; long rc; - int ret = 1; + int ret = EEH_NEXT_ERR_NONE; /* * While running here, it's safe to purge the event queue. @@ -750,7 +750,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) eeh_remove_event(NULL); opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, list_node) { /* * If the subordinate PCI buses of the PHB has been * removed, we needn't take care of it any more. @@ -789,19 +789,19 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) switch (err_type) { case OPAL_EEH_IOC_ERROR: if (severity == OPAL_EEH_SEV_IOC_DEAD) { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, + list_node) { phb = hose->private_data; phb->eeh_state |= PNV_EEH_STATE_REMOVED; } pr_err("EEH: dead IOC detected\n"); - ret = 4; - goto out; + ret = EEH_NEXT_ERR_DEAD_IOC; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: IOC informative error " "detected\n"); ioda_eeh_hub_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; @@ -813,21 +813,20 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) pr_err("EEH: dead PHB#%x detected\n", hose->global_number); phb->eeh_state |= PNV_EEH_STATE_REMOVED; - ret = 3; - goto out; + ret = EEH_NEXT_ERR_DEAD_PHB; } else if (severity == OPAL_EEH_SEV_PHB_FENCED) { if (ioda_eeh_get_phb_pe(hose, pe)) break; pr_err("EEH: fenced PHB#%x detected\n", hose->global_number); - ret = 2; - goto out; + ret = EEH_NEXT_ERR_FENCED_PHB; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: PHB#%x informative error " "detected\n", hose->global_number); ioda_eeh_phb_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; @@ -837,13 +836,23 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", (*pe)->addr, (*pe)->phb->global_number); - ret = 1; - goto out; + ret = EEH_NEXT_ERR_FROZEN_PE; + break; + default: + pr_warn("%s: Unexpected error type %d\n", + __func__, err_type); } + + /* + * If we have no errors on the specific PHB or only + * informative error there, we continue poking it. + * Otherwise, we need actions to be taken by upper + * layer. + */ + if (ret > EEH_NEXT_ERR_INF) + break; } - ret = 0; -out: return ret; }