From: Lennert Buytenhek Date: Mon, 18 Sep 2006 22:17:36 +0000 (+0100) Subject: [ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7e9740b11529a0a69789fbe92d324f293e6266f6;p=linux-beck.git [ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index 94144f7efa6c..7266224ab6d7 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := common.o setup.o irq.o pci.o time.o +obj-y := common.o setup.o irq.o time.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c index 17e7d650fecb..9a17a081327d 100644 --- a/arch/arm/mach-iop32x/common.c +++ b/arch/arm/mach-iop32x/common.c @@ -16,12 +16,6 @@ #include #include -/* - * Shared variables - */ -unsigned long iop3xx_pcibios_min_io = 0; -unsigned long iop3xx_pcibios_min_mem = 0; - #ifdef CONFIG_ARCH_EP80219 #include /* diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c index e447c8103ecd..605b79553747 100644 --- a/arch/arm/mach-iop32x/iq31244-pci.c +++ b/arch/arm/mach-iop32x/iq31244-pci.c @@ -67,51 +67,12 @@ iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) return PCI_IRQ_TABLE_LOOKUP(0, 7); } -static int iq31244_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ31244 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ31244 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq31244_preinit(void) -{ - iop321_init(); -} - static struct hw_pci iq31244_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, - .setup = iq31244_setup, - .scan = iop321_scan_bus, - .preinit = iq31244_preinit, + .setup = iop3xx_pci_setup, + .scan = iop3xx_pci_scan_bus, + .preinit = iop3xx_pci_preinit, .map_irq = iq31244_map_irq }; diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c index 8767950e131f..cedc37b968b7 100644 --- a/arch/arm/mach-iop32x/iq80321-pci.c +++ b/arch/arm/mach-iop32x/iq80321-pci.c @@ -61,51 +61,12 @@ iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) return pci_irq_table[idsel%4][pin-1]; } -static int iq80321_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP321_PCI_LOWER_IO_VA; - res[0].end = IOP321_PCI_UPPER_IO_VA; - res[0].name = "IQ80321 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP321_PCI_LOWER_MEM_PA; - res[1].end = IOP321_PCI_UPPER_MEM_PA; - res[1].name = "IQ80321 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP321_PCI_MEM_OFFSET; - sys->io_offset = IOP321_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80321_preinit(void) -{ - iop321_init(); -} - static struct hw_pci iq80321_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, - .setup = iq80321_setup, - .scan = iop321_scan_bus, - .preinit = iq80321_preinit, + .setup = iop3xx_pci_setup, + .scan = iop3xx_pci_scan_bus, + .preinit = iop3xx_pci_preinit, .map_irq = iq80321_map_irq }; diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index c5f633d2d632..76f2d561dbc1 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -84,7 +84,7 @@ void __init iop321_init_irq(void) intstr_write(0); // treat all as IRQ if(machine_is_iq80321() || machine_is_iq31244()) // all interrupts are inputs to chip - *IOP321_PCIIRSR = 0x0f; + *IOP3XX_PCIIRSR = 0x0f; for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c deleted file mode 100644 index 1a7c683673f2..000000000000 --- a/arch/arm/mach-iop32x/pci.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * arch/arm/mach-iop32x/pci.c - * - * PCI support for the Intel IOP321 chipset - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -// #define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80321 then a type0 made, else a type1 is created. - */ -static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop321_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP321_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP321_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP321_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP321_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop321_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val = iop321_read(addr) >> ((where & 3) * 8); - - if( iop321_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop321_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop321_read(addr); - if (!iop321_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP321_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop321_ops = { - .read = iop321_read_config, - .write = iop321_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the 80200 gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop321_ops, sys); -} - -void iop321_init(void) -{ - DBG("PCI: Intel 80321 PCI init code.\n"); - DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); - DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", - *IOP321_OMWTVR0, - *IOP321_OIOWTVR); - DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); - DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", - *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); - DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); - DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", - *IOP321_IABAR1, *IOP321_IALR1); - DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", - *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); - DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", - *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); - DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", - *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); - - hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index 7865923b0a60..6c74f13b1139 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := common.o setup.o irq.o pci.o time.o +obj-y := setup.o irq.o time.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-iop33x/common.c b/arch/arm/mach-iop33x/common.c deleted file mode 100644 index dd75f2b8e74f..000000000000 --- a/arch/arm/mach-iop33x/common.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-iop33x/common.c - * - * Common routines shared across all IOP3xx implementations - * - * Author: Deepak Saxena - * - * Copyright 2003 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -/* - * Shared variables - */ -unsigned long iop3xx_pcibios_min_io = 0; -unsigned long iop3xx_pcibios_min_mem = 0; diff --git a/arch/arm/mach-iop33x/iq80331-pci.c b/arch/arm/mach-iop33x/iq80331-pci.c index 71adb12a9421..8b0bed5e2f91 100644 --- a/arch/arm/mach-iop33x/iq80331-pci.c +++ b/arch/arm/mach-iop33x/iq80331-pci.c @@ -57,51 +57,12 @@ iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) return PCI_IRQ_TABLE_LOOKUP(1, 7); } -static int iq80331_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80331 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80331 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80331_preinit(void) -{ - iop331_init(); -} - static struct hw_pci iq80331_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, - .setup = iq80331_setup, - .scan = iop331_scan_bus, - .preinit = iq80331_preinit, + .setup = iop3xx_pci_setup, + .scan = iop3xx_pci_scan_bus, + .preinit = iop3xx_pci_preinit, .map_irq = iq80331_map_irq }; diff --git a/arch/arm/mach-iop33x/iq80332-pci.c b/arch/arm/mach-iop33x/iq80332-pci.c index f3010f85b1a2..0de8aa748dd8 100644 --- a/arch/arm/mach-iop33x/iq80332-pci.c +++ b/arch/arm/mach-iop33x/iq80332-pci.c @@ -63,51 +63,12 @@ iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) return PCI_IRQ_TABLE_LOOKUP(1, 7); } -static int iq80332_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if(nr != 0) - return 0; - - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP331_PCI_LOWER_IO_VA; - res[0].end = IOP331_PCI_UPPER_IO_VA; - res[0].name = "IQ80332 PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - - res[1].start = IOP331_PCI_LOWER_MEM_PA; - res[1].end = IOP331_PCI_UPPER_MEM_PA; - res[1].name = "IQ80332 PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - sys->mem_offset = IOP331_PCI_MEM_OFFSET; - sys->io_offset = IOP331_PCI_IO_OFFSET; - - sys->resource[0] = &res[0]; - sys->resource[1] = &res[1]; - sys->resource[2] = NULL; - - return 1; -} - -static void iq80332_preinit(void) -{ - iop331_init(); -} - static struct hw_pci iq80332_pci __initdata = { .swizzle = pci_std_swizzle, .nr_controllers = 1, - .setup = iq80332_setup, - .scan = iop331_scan_bus, - .preinit = iq80332_preinit, + .setup = iop3xx_pci_setup, + .scan = iop3xx_pci_scan_bus, + .preinit = iop3xx_pci_preinit, .map_irq = iq80332_map_irq }; diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index 029fa78876a5..bcffc33a5be8 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -117,7 +117,7 @@ void __init iop331_init_irq(void) intstr_write0(0); // treat all as IRQ intstr_write1(0); if(machine_is_iq80331()) // all interrupts are inputs to chip - *IOP331_PCIIRSR = 0x0f; + *IOP3XX_PCIIRSR = 0x0f; for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-iop33x/pci.c b/arch/arm/mach-iop33x/pci.c deleted file mode 100644 index bf6aba91b47d..000000000000 --- a/arch/arm/mach-iop33x/pci.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * arch/arm/mach-iop33x/pci.c - * - * PCI support for the Intel IOP331 chipset - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#undef DEBUG -#undef DEBUG1 - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -#ifdef DEBUG1 -#define DBG1(x...) printk(x) -#else -#define DBG1(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 80331 then a type0 made, else a type1 is created. - */ -static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop331_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP331_ATUSR; - if (status & 0xf900) - { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP331_ATUSR = status & 0xf900; - ret = 1; - } - status = *IOP331_ATUISR; - if (status & 0x679f) - { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP331_ATUISR = status & 0x679f; - ret = 1; - } - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle - * a delayed abort (in theory.) - */ -static inline u32 iop331_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val = iop331_read(addr) >> ((where & 3) * 8); - - if( iop331_pci_status() ) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop331_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop331_read(addr); - if (!iop331_pci_status() == 0) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP331_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop331_ops = { - .read = iop331_read_config, - .write = iop331_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the XScale gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -int -iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -/* - * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. - */ -struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_bus(sys->busnr, &iop331_ops, sys); -} - -void iop331_init(void) -{ - DBG1("PCI: Intel 80331 PCI init code.\n"); - DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); - DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", - *IOP331_OMWTVR0, - *IOP331_OIOWTVR); - DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); - DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); - DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); - DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); - DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); - DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); - DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); - - hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); -} - diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index 8fb10134a107..16d0630ab252 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h @@ -19,26 +19,10 @@ */ #define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 -/* - * The min PCI I/O and MEM space are dependent on what specific - * chipset/platform we are running on, so instead of hardcoding with - * #ifdefs, we just fill these in the platform level PCI init code. - */ -#ifndef __ASSEMBLY__ -extern unsigned long iop3xx_pcibios_min_io; -extern unsigned long iop3xx_pcibios_min_mem; - -extern unsigned int processor_id; -#endif - -/* - * We just set these to zero since they are really bogus anyways - */ -#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) - /* * Generic chipset bits * diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 1a82dd96bf50..e3c85a05e73a 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h @@ -24,27 +24,6 @@ #define iop_is_321() 1 #endif -/* - * IOP321 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP321_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP321_PCI_LOWER_IO_PA 0x90000000 -#define IOP321_PCI_LOWER_IO_VA 0xfe000000 -#define IOP321_PCI_LOWER_IO_BA (*IOP321_OIOWTVR) -#define IOP321_PCI_UPPER_IO_PA (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_VA (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) -#define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) - -/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ -#define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -#define IOP321_PCI_LOWER_MEM_PA 0x80000000 -#define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) -#define IOP321_PCI_UPPER_MEM_PA (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_UPPER_MEM_BA (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1) -#define IOP321_PCI_MEM_OFFSET (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA) - - /* * IOP321 chipset registers */ @@ -55,69 +34,6 @@ /* Reserved 0x00000000 through 0x000000FF */ /* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP321_ATUVID (volatile u16 *)IOP321_REG_ADDR(0x00000100) -#define IOP321_ATUDID (volatile u16 *)IOP321_REG_ADDR(0x00000102) -#define IOP321_ATUCMD (volatile u16 *)IOP321_REG_ADDR(0x00000104) -#define IOP321_ATUSR (volatile u16 *)IOP321_REG_ADDR(0x00000106) -#define IOP321_ATURID (volatile u8 *)IOP321_REG_ADDR(0x00000108) -#define IOP321_ATUCCR (volatile u32 *)IOP321_REG_ADDR(0x00000109) -#define IOP321_ATUCLSR (volatile u8 *)IOP321_REG_ADDR(0x0000010C) -#define IOP321_ATULT (volatile u8 *)IOP321_REG_ADDR(0x0000010D) -#define IOP321_ATUHTR (volatile u8 *)IOP321_REG_ADDR(0x0000010E) -#define IOP321_ATUBIST (volatile u8 *)IOP321_REG_ADDR(0x0000010F) -#define IOP321_IABAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000110) -#define IOP321_IAUBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000114) -#define IOP321_IABAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000118) -#define IOP321_IAUBAR1 (volatile u32 *)IOP321_REG_ADDR(0x0000011C) -#define IOP321_IABAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000120) -#define IOP321_IAUBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000124) -#define IOP321_ASVIR (volatile u16 *)IOP321_REG_ADDR(0x0000012C) -#define IOP321_ASIR (volatile u16 *)IOP321_REG_ADDR(0x0000012E) -#define IOP321_ERBAR (volatile u32 *)IOP321_REG_ADDR(0x00000130) -/* Reserved 0x00000134 through 0x0000013B */ -#define IOP321_ATUILR (volatile u8 *)IOP321_REG_ADDR(0x0000013C) -#define IOP321_ATUIPR (volatile u8 *)IOP321_REG_ADDR(0x0000013D) -#define IOP321_ATUMGNT (volatile u8 *)IOP321_REG_ADDR(0x0000013E) -#define IOP321_ATUMLAT (volatile u8 *)IOP321_REG_ADDR(0x0000013F) -#define IOP321_IALR0 (volatile u32 *)IOP321_REG_ADDR(0x00000140) -#define IOP321_IATVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000144) -#define IOP321_ERLR (volatile u32 *)IOP321_REG_ADDR(0x00000148) -#define IOP321_ERTVR (volatile u32 *)IOP321_REG_ADDR(0x0000014C) -#define IOP321_IALR1 (volatile u32 *)IOP321_REG_ADDR(0x00000150) -#define IOP321_IALR2 (volatile u32 *)IOP321_REG_ADDR(0x00000154) -#define IOP321_IATVR2 (volatile u32 *)IOP321_REG_ADDR(0x00000158) -#define IOP321_OIOWTVR (volatile u32 *)IOP321_REG_ADDR(0x0000015C) -#define IOP321_OMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000160) -#define IOP321_OUMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000164) -#define IOP321_OMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x00000168) -#define IOP321_OUMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP321_OUDWTVR (volatile u32 *)IOP321_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP321_ATUCR (volatile u32 *)IOP321_REG_ADDR(0x00000180) -#define IOP321_PCSR (volatile u32 *)IOP321_REG_ADDR(0x00000184) -#define IOP321_ATUISR (volatile u32 *)IOP321_REG_ADDR(0x00000188) -#define IOP321_ATUIMR (volatile u32 *)IOP321_REG_ADDR(0x0000018C) -#define IOP321_IABAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000190) -#define IOP321_IAUBAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000194) -#define IOP321_IALR3 (volatile u32 *)IOP321_REG_ADDR(0x00000198) -#define IOP321_IATVR3 (volatile u32 *)IOP321_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP321_OCCAR (volatile u32 *)IOP321_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP321_OCCDR (volatile u32 *)IOP321_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP321_PDSCR (volatile u32 *)IOP321_REG_ADDR(0x000001BC) -#define IOP321_PMCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001C0) -#define IOP321_PMNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001C1) -#define IOP321_APMCR (volatile u16 *)IOP321_REG_ADDR(0x000001C2) -#define IOP321_APMCSR (volatile u16 *)IOP321_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001DF */ -#define IOP321_PCIXCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001E0) -#define IOP321_PCIXNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001E1) -#define IOP321_PCIXCMD (volatile u16 *)IOP321_REG_ADDR(0x000001E2) -#define IOP321_PCIXSR (volatile u32 *)IOP321_REG_ADDR(0x000001E4) -#define IOP321_PCIIRSR (volatile u32 *)IOP321_REG_ADDR(0x000001EC) /* Messaging Unit 0x00000300 through 0x000003FF */ @@ -317,6 +233,8 @@ /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ +#include + #ifndef __ASSEMBLY__ extern void iop321_init_irq(void); diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index b4073f15b405..4c64d9e7229b 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h @@ -20,8 +20,8 @@ * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) #endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h index d4c8d691e1b0..1ac207a0d52e 100644 --- a/include/asm-arm/arch-iop32x/system.h +++ b/include/asm-arm/arch-iop32x/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - *IOP321_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; if ( 1 && mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h index 4a457084c5c6..5e3cb32af020 100644 --- a/include/asm-arm/arch-iop33x/hardware.h +++ b/include/asm-arm/arch-iop33x/hardware.h @@ -19,26 +19,10 @@ */ #define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 -/* - * The min PCI I/O and MEM space are dependent on what specific - * chipset/platform we are running on, so instead of hardcoding with - * #ifdefs, we just fill these in the platform level PCI init code. - */ -#ifndef __ASSEMBLY__ -extern unsigned long iop3xx_pcibios_min_io; -extern unsigned long iop3xx_pcibios_min_mem; - -extern unsigned int processor_id; -#endif - -/* - * We just set these to zero since they are really bogus anyways - */ -#define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) - /* * Generic chipset bits * diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index a7f47122c5e1..e85e1a2e1a86 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h @@ -23,27 +23,6 @@ #define iop_is_331() 1 #endif -/* - * IOP331 I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP331_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP331_PCI_LOWER_IO_PA 0x90000000 -#define IOP331_PCI_LOWER_IO_VA 0xfe000000 -#define IOP331_PCI_LOWER_IO_BA (*IOP331_OIOWTVR) -#define IOP331_PCI_UPPER_IO_PA (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_VA (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_IO_BA (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1) -#define IOP331_PCI_IO_OFFSET (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA) - -/* this can be 128M if OMWTVR1 is set */ -#define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ -#define IOP331_PCI_LOWER_MEM_PA 0x80000000 -#define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) -#define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_UPPER_MEM_BA (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1) -#define IOP331_PCI_MEM_OFFSET (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA) - /* * IOP331 chipset registers */ @@ -54,79 +33,6 @@ /* Reserved 0x00000000 through 0x000000FF */ /* Address Translation Unit 0x00000100 through 0x000001FF */ -#define IOP331_ATUVID (volatile u16 *)IOP331_REG_ADDR(0x00000100) -#define IOP331_ATUDID (volatile u16 *)IOP331_REG_ADDR(0x00000102) -#define IOP331_ATUCMD (volatile u16 *)IOP331_REG_ADDR(0x00000104) -#define IOP331_ATUSR (volatile u16 *)IOP331_REG_ADDR(0x00000106) -#define IOP331_ATURID (volatile u8 *)IOP331_REG_ADDR(0x00000108) -#define IOP331_ATUCCR (volatile u32 *)IOP331_REG_ADDR(0x00000109) -#define IOP331_ATUCLSR (volatile u8 *)IOP331_REG_ADDR(0x0000010C) -#define IOP331_ATULT (volatile u8 *)IOP331_REG_ADDR(0x0000010D) -#define IOP331_ATUHTR (volatile u8 *)IOP331_REG_ADDR(0x0000010E) -#define IOP331_ATUBIST (volatile u8 *)IOP331_REG_ADDR(0x0000010F) -#define IOP331_IABAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000110) -#define IOP331_IAUBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000114) -#define IOP331_IABAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000118) -#define IOP331_IAUBAR1 (volatile u32 *)IOP331_REG_ADDR(0x0000011C) -#define IOP331_IABAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000120) -#define IOP331_IAUBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000124) -#define IOP331_ASVIR (volatile u16 *)IOP331_REG_ADDR(0x0000012C) -#define IOP331_ASIR (volatile u16 *)IOP331_REG_ADDR(0x0000012E) -#define IOP331_ERBAR (volatile u32 *)IOP331_REG_ADDR(0x00000130) -#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134) -/* Reserved 0x00000138 through 0x0000013B */ -#define IOP331_ATUILR (volatile u8 *)IOP331_REG_ADDR(0x0000013C) -#define IOP331_ATUIPR (volatile u8 *)IOP331_REG_ADDR(0x0000013D) -#define IOP331_ATUMGNT (volatile u8 *)IOP331_REG_ADDR(0x0000013E) -#define IOP331_ATUMLAT (volatile u8 *)IOP331_REG_ADDR(0x0000013F) -#define IOP331_IALR0 (volatile u32 *)IOP331_REG_ADDR(0x00000140) -#define IOP331_IATVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000144) -#define IOP331_ERLR (volatile u32 *)IOP331_REG_ADDR(0x00000148) -#define IOP331_ERTVR (volatile u32 *)IOP331_REG_ADDR(0x0000014C) -#define IOP331_IALR1 (volatile u32 *)IOP331_REG_ADDR(0x00000150) -#define IOP331_IALR2 (volatile u32 *)IOP331_REG_ADDR(0x00000154) -#define IOP331_IATVR2 (volatile u32 *)IOP331_REG_ADDR(0x00000158) -#define IOP331_OIOWTVR (volatile u32 *)IOP331_REG_ADDR(0x0000015C) -#define IOP331_OMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000160) -#define IOP331_OUMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000164) -#define IOP331_OMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x00000168) -#define IOP331_OUMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x0000016C) -/* Reserved 0x00000170 through 0x00000177*/ -#define IOP331_OUDWTVR (volatile u32 *)IOP331_REG_ADDR(0x00000178) -/* Reserved 0x0000017C through 0x0000017F*/ -#define IOP331_ATUCR (volatile u32 *)IOP331_REG_ADDR(0x00000180) -#define IOP331_PCSR (volatile u32 *)IOP331_REG_ADDR(0x00000184) -#define IOP331_ATUISR (volatile u32 *)IOP331_REG_ADDR(0x00000188) -#define IOP331_ATUIMR (volatile u32 *)IOP331_REG_ADDR(0x0000018C) -#define IOP331_IABAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000190) -#define IOP331_IAUBAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000194) -#define IOP331_IALR3 (volatile u32 *)IOP331_REG_ADDR(0x00000198) -#define IOP331_IATVR3 (volatile u32 *)IOP331_REG_ADDR(0x0000019C) -/* Reserved 0x000001A0 through 0x000001A3*/ -#define IOP331_OCCAR (volatile u32 *)IOP331_REG_ADDR(0x000001A4) -/* Reserved 0x000001A8 through 0x000001AB*/ -#define IOP331_OCCDR (volatile u32 *)IOP331_REG_ADDR(0x000001AC) -/* Reserved 0x000001B0 through 0x000001BB*/ -#define IOP331_VPDCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001B8) -#define IOP331_VPDNXTP (volatile u8 *)IOP331_REG_ADDR(0x000001B9) -#define IOP331_VPDAR (volatile u16 *)IOP331_REG_ADDR(0x000001BA) -#define IOP331_VPDDR (volatile u32 *)IOP331_REG_ADDR(0x000001BC) -#define IOP331_PMCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001C0) -#define IOP331_PMNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001C1) -#define IOP331_APMCR (volatile u16 *)IOP331_REG_ADDR(0x000001C2) -#define IOP331_APMCSR (volatile u16 *)IOP331_REG_ADDR(0x000001C4) -/* Reserved 0x000001C6 through 0x000001CF */ -#define IOP331_MSICAPID (volatile u8 *)IOP331_REG_ADDR(0x000001D0) -#define IOP331_MSINXTP (volatile u8 *)IOP331_REG_ADDR(0x000001D1) -#define IOP331_MSIMCR (volatile u16 *)IOP331_REG_ADDR(0x000001D2) -#define IOP331_MSIMAR (volatile u32 *)IOP331_REG_ADDR(0x000001D4) -#define IOP331_MSIMUAR (volatile u32 *)IOP331_REG_ADDR(0x000001D8) -#define IOP331_MSIMDR (volatile u32 *)IOP331_REG_ADDR(0x000001DC) -#define IOP331_PCIXCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001E0) -#define IOP331_PCIXNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001E1) -#define IOP331_PCIXCMD (volatile u16 *)IOP331_REG_ADDR(0x000001E2) -#define IOP331_PCIXSR (volatile u32 *)IOP331_REG_ADDR(0x000001E4) -#define IOP331_PCIIRSR (volatile u32 *)IOP331_REG_ADDR(0x000001EC) /* Messaging Unit 0x00000300 through 0x000003FF */ @@ -332,6 +238,8 @@ /* Reserved 0x0000178c through 0x000019ff */ +#include + #ifndef __ASSEMBLY__ extern void iop331_init_irq(void); diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index 5e47164934ce..de208d2cca4e 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h @@ -19,8 +19,8 @@ * bus_to_virt: Used to convert an address for DMA operations * to an address that the kernel can use. */ -#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) -#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) +#define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) +#define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) #endif diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h index 43cc787ea629..8270ad9f86c8 100644 --- a/include/asm-arm/arch-iop33x/system.h +++ b/include/asm-arm/arch-iop33x/system.h @@ -16,7 +16,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - *IOP331_PCSR = 0x30; + *IOP3XX_PCSR = 0x30; if ( 1 && mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index cb41defad4a1..24621c49a0c7 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -56,14 +56,6 @@ extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); extern void iop3xx_pci_preinit(void); -extern int iop321_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *); -extern void iop321_init(void); - -extern int iop331_setup(int nr, struct pci_sys_data *); -extern struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *); -extern void iop331_init(void); - extern int dc21285_setup(int nr, struct pci_sys_data *); extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); extern void dc21285_preinit(void);