From: Toshi Kikuchi <toshik@chromium.org>
Date: Wed, 13 May 2015 01:15:14 +0000 (-0700)
Subject: Documentation: leds-lp5523: describe master fader attributes
X-Git-Tag: v4.2-rc1~47^2~15
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7ff6b23251955dc1cf108eb4619b4a2eeac75bca;p=karo-tx-linux.git

Documentation: leds-lp5523: describe master fader attributes

Add the usage of the new attributes for master faders.

Signed-off-by: Toshi Kikuchi <toshik@chromium.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
---

diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
index 5b3e91d4ac59..0dbbd279c9b9 100644
--- a/Documentation/leds/leds-lp5523.txt
+++ b/Documentation/leds/leds-lp5523.txt
@@ -49,6 +49,36 @@ There are two ways to run LED patterns.
 2) Firmware interface - LP55xx common interface
   For the details, please refer to 'firmware' section in leds-lp55xx.txt
 
+LP5523 has three master faders. If a channel is mapped to one of
+the master faders, its output is dimmed based on the value of the master
+fader.
+
+For example,
+
+  echo "123000123" > master_fader_leds
+
+creates the following channel-fader mappings:
+
+  channel 0,6 to master_fader1
+  channel 1,7 to master_fader2
+  channel 2,8 to master_fader3
+
+Then, to have 25% of the original output on channel 0,6:
+
+  echo 64 > master_fader1
+
+To have 0% of the original output (i.e. no output) channel 1,7:
+
+  echo 0 > master_fader2
+
+To have 100% of the original output (i.e. no dimming) on channel 2,8:
+
+  echo 255 > master_fader3
+
+To clear all master fader controls:
+
+  echo "000000000" > master_fader_leds
+
 Selftest uses always the current from the platform data.
 
 Each channel contains led current settings.