From: Shawn Lin Date: Wed, 4 May 2016 01:43:24 +0000 (+0800) Subject: mmc: sdhci-of-arasan: fix set_clock when a phy is supported X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=802ac39a55664b15dd162e3444d5be34045abeeb;p=linux-beck.git mmc: sdhci-of-arasan: fix set_clock when a phy is supported commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan") introduce phy support for arasan. According to the vendor's databook, we should make sure the phy is in poweroff status before we configure the clk stuff. Otherwise it may cause some IO sample timing issues from the test. And we don't need this extra operation while running in low performance mode since phy doesn't trigger sampling block. Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 2e482b13d25e..b6f4c1d41636 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -55,8 +55,32 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) return freq; } +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + bool ctrl_phy = false; + + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy))) + ctrl_phy = true; + + if (ctrl_phy) { + spin_unlock_irq(&host->lock); + phy_power_off(sdhci_arasan->phy); + spin_lock_irq(&host->lock); + } + + sdhci_set_clock(host, clock); + + if (ctrl_phy) { + spin_unlock_irq(&host->lock); + phy_power_on(sdhci_arasan->phy); + spin_lock_irq(&host->lock); + } +} + static struct sdhci_ops sdhci_arasan_ops = { - .set_clock = sdhci_set_clock, + .set_clock = sdhci_arasan_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_arasan_get_timeout_clock, .set_bus_width = sdhci_set_bus_width,