From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Date: Thu, 3 Nov 2016 18:07:31 +0000 (+0300)
Subject: arm64: dts: m3ulcb: enable GPIO leds
X-Git-Tag: v4.10-rc1~81^2~8^2~9
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=811a0d07e68ed3bb576e2f193f2c9831bb25c04e;p=karo-tx-linux.git

arm64: dts: m3ulcb: enable GPIO leds

This supports GPIO leds on M3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 96cda59c2698..49162bd488f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -30,6 +30,17 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &extal_clk {