From: Shinobu Uehara Date: Mon, 25 Aug 2014 03:01:32 +0000 (-0700) Subject: mmc: tmio: check ILL_FUNC instead of CBSY X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=81e888daab027e05130b0459e5d8e0b42dac4323;p=linux-beck.git mmc: tmio: check ILL_FUNC instead of CBSY Some controllers need to check SD bus status when writing data. Then, it checks ILL_FUNC bit on SD_INFO2 register, and this method is controlled via TMIO_MMC_HAS_IDLE_WAIT flags. Same method is required on tmio_mmc_data_irq() which will be called after writing data. Current driver is checking CBSY bit for this purpose, but, some controllers doesn't have CBSY bit. This patch checks ILL_FUNC bit instead of CBSY bit if it has TMIO_MMC_HAS_IDLE_WAIT flags [Kuninori Morimoto: tidyuped for upstreaming] Tested-by: Nguyen Xuan Nui Tested-by: Hiep Cao Minh Signed-off-by: Shinobu Uehara Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index c5ffa92ccb18..10b3144930e2 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -490,6 +490,9 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) goto out; if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { + u32 status = sd_ctrl_read32(host, CTL_STATUS); + bool done = false; + /* * Has all data been written out yet? Testing on SuperH showed, * that in most cases the first interrupt comes already with the @@ -498,7 +501,15 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) * DATAEND interrupt with the BUSY bit set, in this cases * waiting for one more interrupt fixes the problem. */ - if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { + if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) { + if (status & TMIO_STAT_ILL_FUNC) + done = true; + } else { + if (!(status & TMIO_STAT_CMD_BUSY)) + done = true; + } + + if (done) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); }