From: Olli Salonen Date: Mon, 29 Sep 2014 07:44:16 +0000 (-0300) Subject: [media] cx23855: add support for DVBSky T980C (no CI support) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=82c10276d4e86fa51b89cf62a1cf6ed12d543843;p=linux-beck.git [media] cx23855: add support for DVBSky T980C (no CI support) This patch adds basic support for DVBSky T980C card. CI interface is not supported. DVBSky T980C is a PCIe card with the following components: - CX23885 PCIe bridge - Si2168-A20 demodulator - Si2158-A20 tuner - CIMaX SP2 CI chip The demodulator and tuner need firmware. They're the same as used with TT CT2-4650 CI: https://www.mail-archive.com/linux-media@vger.kernel.org/msg78033.html Signed-off-by: Olli Salonen Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 88c257d1161b..e8965e63eb09 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -680,6 +680,10 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVBSKY_T980C] = { + .name = "DVBSky T980C", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -939,6 +943,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x4254, .subdevice = 0x9580, .card = CX23885_BOARD_DVBSKY_T9580, + }, { + .subvendor = 0x4254, + .subdevice = 0x980c, + .card = CX23885_BOARD_DVBSKY_T980C, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1541,6 +1549,36 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(100); cx23885_gpio_set(dev, GPIO_2 | GPIO_11); break; + case CX23885_BOARD_DVBSKY_T980C: + /* + * GPIO-0 INTA from CiMax, input + * GPIO-1 reset CiMax, output, high active + * GPIO-2 reset demod, output, low active + * GPIO-3 to GPIO-10 data/addr for CAM + * GPIO-11 ~CS0 to CiMax1 + * GPIO-12 ~CS1 to CiMax2 + * GPIO-13 ADL0 load LSB addr + * GPIO-14 ADL1 load MSB addr + * GPIO-15 ~RDY from CiMax + * GPIO-17 ~RD to CiMax + * GPIO-18 ~WR to CiMax + */ + + cx_set(GP0_IO, 0x00060002); /* GPIO 1/2 as output */ + cx_clear(GP0_IO, 0x00010004); /* GPIO 0 as input */ + mdelay(100); /* reset delay */ + cx_set(GP0_IO, 0x00060004); /* GPIO as out, reset high */ + cx_clear(GP0_IO, 0x00010002); + cx_write(MC417_CTL, 0x00000037); /* enable GPIO3-18 pins */ + + /* GPIO-15 IN as ~ACK, rest as OUT */ + cx_write(MC417_OEN, 0x00001000); + + /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */ + cx_write(MC417_RWD, 0x0000c300); + + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000); /* INTERRUPTS active low */ } } @@ -1817,6 +1855,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_TEVII_S471: case CX23885_BOARD_DVBWORLD_2005: case CX23885_BOARD_PROF_8000: + case CX23885_BOARD_DVBSKY_T980C: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -1935,6 +1974,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_TBS_6980: case CX23885_BOARD_TBS_6981: case CX23885_BOARD_DVBSKY_T9580: + case CX23885_BOARD_DVBSKY_T980C: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, "cx25840", 0x88 >> 1, NULL); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 4cb90317ff45..062854d30a75 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -1680,6 +1680,52 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; + case CX23885_BOARD_DVBSKY_T980C: + i2c_bus = &dev->i2c_bus[1]; + + /* attach frontend */ + memset(&si2168_config, 0, sizeof(si2168_config)); + si2168_config.i2c_adapter = &adapter; + si2168_config.fe = &fe0->dvb.frontend; + si2168_config.ts_mode = SI2168_TS_PARALLEL; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2168", I2C_NAME_SIZE); + info.addr = 0x64; + info.platform_data = &si2168_config; + request_module(info.type); + client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); + if (client_demod == NULL || + client_demod->dev.driver == NULL) + goto frontend_detach; + if (!try_module_get(client_demod->dev.driver->owner)) { + i2c_unregister_device(client_demod); + goto frontend_detach; + } + port->i2c_client_demod = client_demod; + + /* attach tuner */ + memset(&si2157_config, 0, sizeof(si2157_config)); + si2157_config.fe = fe0->dvb.frontend; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2157", I2C_NAME_SIZE); + info.addr = 0x60; + info.platform_data = &si2157_config; + request_module(info.type); + client_tuner = i2c_new_device(adapter, &info); + if (client_tuner == NULL || + client_tuner->dev.driver == NULL) { + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + goto frontend_detach; + } + if (!try_module_get(client_tuner->dev.driver->owner)) { + i2c_unregister_device(client_tuner); + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + goto frontend_detach; + } + port->i2c_client_tuner = client_tuner; + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", @@ -1770,6 +1816,21 @@ static int dvb_register(struct cx23885_tsport *port) (port->nr-1) * 8, 6); break; } + case CX23885_BOARD_DVBSKY_T980C: { + u8 eeprom[256]; /* 24C02 i2c eeprom */ + + if (port->nr != 1) + break; + + /* Read entire EEPROM */ + dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, + sizeof(eeprom)); + printk(KERN_INFO "DVBSky T980C MAC address: %pM\n", + eeprom + 0xc0); + memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6); + break; + } } return ret; diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index 6c35e6115969..33b1e26847a2 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -93,6 +93,7 @@ #define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44 #define CX23885_BOARD_DVBSKY_T9580 45 +#define CX23885_BOARD_DVBSKY_T980C 46 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002