From: Rajkumar Manoharan Date: Sun, 1 Jul 2012 14:23:55 +0000 (+0530) Subject: ath9k_hw: fix AR9462 2g5g switch on full reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=83bfea42190b72acc1a1653bc10b21e741490087;p=linux-beck.git ath9k_hw: fix AR9462 2g5g switch on full reset On full reset, mci reset will put LNA update on 2G mode. And Whenever 2g5g_switch is forced at the end of full reset, lna update should not be skipped. Not doing so, is affecting WLAN rx and causing beacon loss when BTCOEX is enabled on AR9462. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 61558375bfbf..9a34fcaae3ff 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1015,12 +1015,9 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force) return; if (mci->is_2g) { - if (!force) { - ar9003_mci_send_2g5g_status(ah, true); - - ar9003_mci_send_lna_transfer(ah, true); - udelay(5); - } + ar9003_mci_send_2g5g_status(ah, true); + ar9003_mci_send_lna_transfer(ah, true); + udelay(5); REG_CLR_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE); @@ -1030,10 +1027,8 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force) if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) ar9003_mci_osla_setup(ah, true); } else { - if (!force) { - ar9003_mci_send_lna_take(ah, true); - udelay(5); - } + ar9003_mci_send_lna_take(ah, true); + udelay(5); REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE); @@ -1041,8 +1036,7 @@ void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force) AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL); ar9003_mci_osla_setup(ah, false); - if (!force) - ar9003_mci_send_2g5g_status(ah, true); + ar9003_mci_send_2g5g_status(ah, true); } }