From: Anson Huang Date: Tue, 7 Jan 2014 17:46:04 +0000 (-0500) Subject: ARM: imx: AHB rate must be set to 132MHz on i.mx6sl X-Git-Tag: next-20140306~107^2~7^2~33 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=848db4a0a17a;p=karo-tx-linux.git ARM: imx: AHB rate must be set to 132MHz on i.mx6sl The reset value of AHB divider is 3, so current AHB rate is 99MHz which is not correct for kernel, need to ensure AHB rate is 132MHz in clk driver, as ipg is sourcing from AHB, and it should be 66MHz by default. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 4c86f3035205..c5f17c2d4951 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -1,5 +1,5 @@ /* - * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -72,6 +72,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) void __iomem *base; int irq; int i; + int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); @@ -258,6 +259,12 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + /* Ensure the AHB clk is at 132MHz. */ + ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000); + if (ret) + pr_warn("%s: failed to set AHB clock rate %d!\n", + __func__, ret); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);