From: Geert Uytterhoeven Date: Tue, 5 May 2015 16:32:23 +0000 (+0200) Subject: iio: Allow compile test of GPIO consumers if !GPIOLIB X-Git-Tag: v4.2-rc1~88^2~628^2~50 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8493585317b1fe1ab7a334faac71fb1e36fde508;p=karo-tx-linux.git iio: Allow compile test of GPIO consumers if !GPIOLIB The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven Cc: Jonathan Cameron Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 4813b793b9f7..688c0d1cb47d 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -5,7 +5,7 @@ menu "Humidity sensors" config DHT11 tristate "DHT11 (and compatible sensors) driver" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This driver supports reading data via a single interrupt generating GPIO line. Currently tested are DHT11 and DHT22. diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index a5d6de72c523..00297bbb7e4b 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -8,7 +8,7 @@ menu "Magnetometer sensors" config AK8975 tristate "Asahi Kasei AK 3-Axis Magnetometer" depends on I2C - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help Say yes here to build support for Asahi Kasei AK8975, AK8963, AK09911 or AK09912 3-Axis Magnetometer. @@ -19,7 +19,7 @@ config AK8975 config AK09911 tristate "Asahi Kasei AK09911 3-axis Compass" depends on I2C - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST select AK8975 help Deprecated: AK09911 is now supported by AK8975 driver.