From: Hans Verkuil Date: Tue, 18 Oct 2016 15:01:34 +0000 (+0200) Subject: ARM: dts: koelsch: add HDMI input X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=84e3a74664c52b58cd7f5b6fa381f7f1cd1956e0;p=linux-beck.git ARM: dts: koelsch: add HDMI input Add support in the dts for the HDMI input. Based on the Lager dts patch from Ulrich Hecht. Signed-off-by: Hans Verkuil [uli: removed "renesas," prefixes from pfc nodes] Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f17bfa000f73..c457b43deb7d 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -265,12 +265,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -414,6 +425,11 @@ function = "usb1"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -617,7 +633,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -699,6 +742,27 @@ cpu0-supply = <&vdd_dvfs>; }; +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { status = "okay";