From: Bjorn Andersson Date: Thu, 21 Apr 2016 21:09:42 +0000 (-0700) Subject: wcn36xx: Set SMD timeout to 10 seconds X-Git-Tag: v4.7-rc1~96^2~8^2^2~15 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8527f68849caadd0b7c560c613f2e18c9e1f8d47;p=karo-tx-linux.git wcn36xx: Set SMD timeout to 10 seconds After booting the wireless subsystem and uploading the NV blob to the WCNSS_CTRL service the remote continues to do things and will not start servicing wlan-requests for another 2-5 seconds (measured). The downstream code does not have any special handling for this case, but has a timeout of 10 seconds for the communication layer. By extending the wcn36xx timeout to match this we follows the same flow for the boot procedure and can successfully configure WiFi as wlan0 is registered. Signed-off-by: Bjorn Andersson Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h index d74d781f4c8d..d93e3fd73831 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.h +++ b/drivers/net/wireless/ath/wcn36xx/smd.h @@ -24,7 +24,7 @@ #define WCN36XX_HAL_BUF_SIZE 4096 -#define HAL_MSG_TIMEOUT 500 +#define HAL_MSG_TIMEOUT 10000 #define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400 #define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200 /* The PNO version info be contained in the rsp msg */