From: Dmitry Tunin Date: Sun, 31 May 2015 18:26:49 +0000 (-0700) Subject: Input: focaltech - report finger width to userspace X-Git-Tag: v4.2-rc1~126^2^2~13 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=85919a00e55f90e72405e707eb23c930b8d8db91;p=karo-tx-linux.git Input: focaltech - report finger width to userspace Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0. 0xff is reported, when a large contact area is detected. This can be handled in userspace. Signed-off-by: Dmitry Tunin Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index 23d259416f2f..4d5576de81be 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -103,6 +103,16 @@ struct focaltech_hw_state { */ struct focaltech_finger_state fingers[FOC_MAX_FINGERS]; + /* + * Finger width 0-7 and 15 for a very big contact area. + * 15 value stays until the finger is released. + * Width is reported only in absolute packets. + * Since hardware reports width only for last touching finger, + * there is no need to store width for every specific finger, + * so we keep only last value reported. + */ + unsigned int width; + /* True if the clickpad has been pressed. */ bool pressed; }; @@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse) input_report_abs(dev, ABS_MT_POSITION_X, clamped_x); input_report_abs(dev, ABS_MT_POSITION_Y, priv->y_max - clamped_y); + input_report_abs(dev, ABS_TOOL_WIDTH, state->width); } } input_mt_report_pointer_emulation(dev, true); @@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2]; state->fingers[finger].y = (packet[3] << 8) | packet[4]; + state->width = packet[5] >> 4; state->fingers[finger].valid = true; } @@ -331,6 +343,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse) __set_bit(EV_ABS, dev->evbit); input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); + input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); input_mt_init_slots(dev, 5, INPUT_MT_POINTER); __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); }