From: Michael Hillmann Date: Wed, 19 Nov 2008 22:26:25 +0000 (-0800) Subject: Staging: comedi: add me_daq driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=85acac61096f946a78cf0c4b65f7cebe580693b6;p=linux-beck.git Staging: comedi: add me_daq driver This adds the me_daq comedi driver to the build. From: Michael Hillmann Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 3dbd4f121398..eb7a615e0859 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_COMEDI) += comedi_parport.o # Comedi PCI drivers obj-$(CONFIG_COMEDI_PCI_DRIVERS) += mite.o obj-$(CONFIG_COMEDI_PCI_DRIVERS) += icp_multi.o +obj-$(CONFIG_COMEDI_PCI_DRIVERS) += me_daq.o obj-$(CONFIG_COMEDI_PCI_DRIVERS) += me4000.o obj-$(CONFIG_COMEDI_PCI_DRIVERS) += rtd520.o obj-$(CONFIG_COMEDI_PCI_DRIVERS) += s626.o diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c new file mode 100644 index 000000000000..e741ec54527d --- /dev/null +++ b/drivers/staging/comedi/drivers/me_daq.c @@ -0,0 +1,859 @@ +/* + + comedi/drivers/me_daq.c + + Hardware driver for Meilhaus data acquisition cards: + + ME-2000i, ME-2600i, ME-3000vm1 + + Copyright (C) 2002 Michael Hillmann + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* +Driver: me_daq +Description: Meilhaus PCI data acquisition cards +Author: Michael Hillmann +Devices: [Meilhaus] ME-2600i (me_daq), ME-2000i +Status: experimental + +Supports: + + Analog Output + +Configuration options: + + [0] - PCI bus number (optional) + [1] - PCI slot number (optional) + + If bus/slot is not specified, the first available PCI + device will be used. + +The 2600 requires a firmware upload, which can be accomplished +using the -i or --init-data option of comedi_config. +The firmware can be +found in the comedi_nonfree_firmware tarball available +from http://www.comedi.org + +*/ + +#include "../comedidev.h" + +#include "comedi_pci.h" + +//#include "me2600_fw.h" + +#define ME_DRIVER_NAME "me_daq" + +#define ME2000_DEVICE_ID 0x2000 +#define ME2600_DEVICE_ID 0x2600 + +#define PLX_INTCSR 0x4C // PLX interrupt status register +#define XILINX_DOWNLOAD_RESET 0x42 // Xilinx registers + +#define ME_CONTROL_1 0x0000 // - | W +#define INTERRUPT_ENABLE (1<<15) +#define COUNTER_B_IRQ (1<<12) +#define COUNTER_A_IRQ (1<<11) +#define CHANLIST_READY_IRQ (1<<10) +#define EXT_IRQ (1<<9) +#define ADFIFO_HALFFULL_IRQ (1<<8) +#define SCAN_COUNT_ENABLE (1<<5) +#define SIMULTANEOUS_ENABLE (1<<4) +#define TRIGGER_FALLING_EDGE (1<<3) +#define CONTINUOUS_MODE (1<<2) +#define DISABLE_ADC (0<<0) +#define SOFTWARE_TRIGGERED_ADC (1<<0) +#define SCAN_TRIGGERED_ADC (2<<0) +#define EXT_TRIGGERED_ADC (3<<0) +#define ME_ADC_START 0x0000 // R | - +#define ME_CONTROL_2 0x0002 // - | W +#define ENABLE_ADFIFO (1<<10) +#define ENABLE_CHANLIST (1<<9) +#define ENABLE_PORT_B (1<<7) +#define ENABLE_PORT_A (1<<6) +#define ENABLE_COUNTER_B (1<<4) +#define ENABLE_COUNTER_A (1<<3) +#define ENABLE_DAC (1<<1) +#define BUFFERED_DAC (1<<0) +#define ME_DAC_UPDATE 0x0002 // R | - +#define ME_STATUS 0x0004 // R | - +#define COUNTER_B_IRQ_PENDING (1<<12) +#define COUNTER_A_IRQ_PENDING (1<<11) +#define CHANLIST_READY_IRQ_PENDING (1<<10) +#define EXT_IRQ_PENDING (1<<9) +#define ADFIFO_HALFFULL_IRQ_PENDING (1<<8) +#define ADFIFO_FULL (1<<4) +#define ADFIFO_HALFFULL (1<<3) +#define ADFIFO_EMPTY (1<<2) +#define CHANLIST_FULL (1<<1) +#define FST_ACTIVE (1<<0) +#define ME_RESET_INTERRUPT 0x0004 // - | W +#define ME_DIO_PORT_A 0x0006 // R | W +#define ME_DIO_PORT_B 0x0008 // R | W +#define ME_TIMER_DATA_0 0x000A // - | W +#define ME_TIMER_DATA_1 0x000C // - | W +#define ME_TIMER_DATA_2 0x000E // - | W +#define ME_CHANNEL_LIST 0x0010 // - | W +#define ADC_UNIPOLAR (1<<6) +#define ADC_GAIN_0 (0<<4) +#define ADC_GAIN_1 (1<<4) +#define ADC_GAIN_2 (2<<4) +#define ADC_GAIN_3 (3<<4) +#define ME_READ_AD_FIFO 0x0010 // R | - +#define ME_DAC_CONTROL 0x0012 // - | W +#define DAC_UNIPOLAR_D (0<<4) +#define DAC_BIPOLAR_D (1<<4) +#define DAC_UNIPOLAR_C (0<<5) +#define DAC_BIPOLAR_C (1<<5) +#define DAC_UNIPOLAR_B (0<<6) +#define DAC_BIPOLAR_B (1<<6) +#define DAC_UNIPOLAR_A (0<<7) +#define DAC_BIPOLAR_A (1<<7) +#define DAC_GAIN_0_D (0<<8) +#define DAC_GAIN_1_D (1<<8) +#define DAC_GAIN_0_C (0<<9) +#define DAC_GAIN_1_C (1<<9) +#define DAC_GAIN_0_B (0<<10) +#define DAC_GAIN_1_B (1<<10) +#define DAC_GAIN_0_A (0<<11) +#define DAC_GAIN_1_A (1<<11) +#define ME_DAC_CONTROL_UPDATE 0x0012 // R | - +#define ME_DAC_DATA_A 0x0014 // - | W +#define ME_DAC_DATA_B 0x0016 // - | W +#define ME_DAC_DATA_C 0x0018 // - | W +#define ME_DAC_DATA_D 0x001A // - | W +#define ME_COUNTER_ENDDATA_A 0x001C // - | W +#define ME_COUNTER_ENDDATA_B 0x001E // - | W +#define ME_COUNTER_STARTDATA_A 0x0020 // - | W +#define ME_COUNTER_VALUE_A 0x0020 // R | - +#define ME_COUNTER_STARTDATA_B 0x0022 // - | W +#define ME_COUNTER_VALUE_B 0x0022 // R | - + +// +// Function prototypes +// + +static int me_attach(comedi_device * dev, comedi_devconfig * it); +static int me_detach(comedi_device * dev); + +static const comedi_lrange me2000_ai_range = { + 8, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } +}; + +static const comedi_lrange me2600_ai_range = { + 8, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } +}; + +static const comedi_lrange me2600_ao_range = { + 3, + { + BIP_RANGE(10), + BIP_RANGE(5), + UNI_RANGE(10) + } +}; + +static DEFINE_PCI_DEVICE_TABLE(me_pci_table) = { + {PCI_VENDOR_ID_MEILHAUS, ME2600_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + 0}, + {PCI_VENDOR_ID_MEILHAUS, ME2000_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, me_pci_table); + +// +// Board specification structure +// + +typedef struct { + const char *name; // driver name + int device_id; + int ao_channel_nbr; // DA config + int ao_resolution; + int ao_resolution_mask; + const comedi_lrange *ao_range_list; + int ai_channel_nbr; // AD config + int ai_resolution; + int ai_resolution_mask; + const comedi_lrange *ai_range_list; + int dio_channel_nbr; // DIO config +} me_board_struct; + +static const me_board_struct me_boards[] = { + { // -- ME-2600i -- + name: ME_DRIVER_NAME, + device_id:ME2600_DEVICE_ID, + ao_channel_nbr:4,// Analog Output + ao_resolution:12, + ao_resolution_mask:0x0fff, + ao_range_list:&me2600_ao_range, + ai_channel_nbr:16, + // Analog Input + ai_resolution:12, + ai_resolution_mask:0x0fff, + ai_range_list:&me2600_ai_range, + dio_channel_nbr:32, + }, + { // -- ME-2000i -- + name: ME_DRIVER_NAME, + device_id:ME2000_DEVICE_ID, + ao_channel_nbr:0,// Analog Output + ao_resolution:0, + ao_resolution_mask:0, + ao_range_list:0, + ai_channel_nbr:16, + // Analog Input + ai_resolution:12, + ai_resolution_mask:0x0fff, + ai_range_list:&me2000_ai_range, + dio_channel_nbr:32, + } +}; + +#define me_board_nbr (sizeof(me_boards)/sizeof(me_board_struct)) + +static comedi_driver me_driver = { + driver_name:ME_DRIVER_NAME, + module:THIS_MODULE, + attach:me_attach, + detach:me_detach, +}; + +COMEDI_PCI_INITCLEANUP(me_driver, me_pci_table); + +// +// Private data structure +// + +typedef struct { + struct pci_dev *pci_device; + void *plx_regbase; // PLX configuration base address + void *me_regbase; // Base address of the Meilhaus card + unsigned long plx_regbase_size; // Size of PLX configuration space + unsigned long me_regbase_size; // Size of Meilhaus space + + unsigned short control_1; // Mirror of CONTROL_1 register + unsigned short control_2; // Mirror of CONTROL_2 register + unsigned short dac_control; // Mirror of the DAC_CONTROL register + int ao_readback[4]; // Mirror of analog output data + +} me_private_data_struct; + +#define dev_private ((me_private_data_struct *)dev->private) + +// ------------------------------------------------------------------ +// +// Helpful functions +// +// ------------------------------------------------------------------ + +static __inline__ void sleep(unsigned sec) +{ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(sec * HZ); +} + +// ------------------------------------------------------------------ +// +// DIGITAL INPUT/OUTPUT SECTION +// +// ------------------------------------------------------------------ + +static int me_dio_insn_config(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int bits; + int mask = 1 << CR_CHAN(insn->chanspec); + + /* calculate port */ + if (mask & 0x0000ffff) { /* Port A in use */ + bits = 0x0000ffff; + + /* Enable Port A */ + dev_private->control_2 |= ENABLE_PORT_A; + writew(dev_private->control_2, + dev_private->me_regbase + ME_CONTROL_2); + } else { /* Port B in use */ + + bits = 0xffff0000; + + /* Enable Port B */ + dev_private->control_2 |= ENABLE_PORT_B; + writew(dev_private->control_2, + dev_private->me_regbase + ME_CONTROL_2); + } + + if (data[0]) { /* Config port as output */ + s->io_bits |= bits; + } else { /* Config port as input */ + + s->io_bits &= ~bits; + } + + return 1; +} + +// +// Digital instant input/outputs +// + +static int me_dio_insn_bits(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + unsigned int mask = data[0]; + s->state &= ~mask; + s->state |= (mask & data[1]); + + mask &= s->io_bits; + if (mask & 0x0000ffff) { /* Port A */ + writew((s->state & 0xffff), + dev_private->me_regbase + ME_DIO_PORT_A); + } else { + data[1] &= ~0x0000ffff; + data[1] |= readw(dev_private->me_regbase + ME_DIO_PORT_A); + } + + if (mask & 0xffff0000) { /* Port B */ + writew(((s->state >> 16) & 0xffff), + dev_private->me_regbase + ME_DIO_PORT_B); + } else { + data[1] &= ~0xffff0000; + data[1] |= readw(dev_private->me_regbase + ME_DIO_PORT_B) << 16; + } + + return 2; +} + +// ------------------------------------------------------------------ +// +// ANALOG INPUT SECTION +// +// ------------------------------------------------------------------ + +// +// Analog instant input +// +static int me_ai_insn_read(comedi_device * dev, + comedi_subdevice * subdevice, comedi_insn * insn, lsampl_t * data) +{ + unsigned short value; + int chan = CR_CHAN((&insn->chanspec)[0]); + int rang = CR_RANGE((&insn->chanspec)[0]); + int aref = CR_AREF((&insn->chanspec)[0]); + int i; + + /* stop any running conversion */ + dev_private->control_1 &= 0xFFFC; + writew(dev_private->control_1, dev_private->me_regbase + ME_CONTROL_1); + + /* clear chanlist and ad fifo */ + dev_private->control_2 &= ~(ENABLE_ADFIFO | ENABLE_CHANLIST); + writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2); + + /* reset any pending interrupt */ + writew(0x00, dev_private->me_regbase + ME_RESET_INTERRUPT); + + /* enable the chanlist and ADC fifo */ + dev_private->control_2 |= (ENABLE_ADFIFO | ENABLE_CHANLIST); + writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2); + + /* write to channel list fifo */ + value = chan & 0x0f; // b3:b0 are the channel number + value |= (rang & 0x03) << 4; // b5:b4 are the channel gain + value |= (rang & 0x04) << 4; // b6 channel polarity + value |= ((aref & AREF_DIFF) ? 0x80 : 0); // b7 single or differential + writew(value & 0xff, dev_private->me_regbase + ME_CHANNEL_LIST); + + /* set ADC mode to software trigger */ + dev_private->control_1 |= SOFTWARE_TRIGGERED_ADC; + writew(dev_private->control_1, dev_private->me_regbase + ME_CONTROL_1); + + /* start conversion by reading from ADC_START */ + readw(dev_private->me_regbase + ME_ADC_START); + + /* wait for ADC fifo not empty flag */ + for (i = 100000; i > 0; i--) { + if (!(readw(dev_private->me_regbase + ME_STATUS) & 0x0004)) { + break; + } + } + + /* get value from ADC fifo */ + if (i) { + data[0] = + (readw(dev_private->me_regbase + + ME_READ_AD_FIFO) ^ 0x800) & 0x0FFF; + } else { + printk("comedi%d: Cannot get single value\n", dev->minor); + return -EIO; + } + + /* stop any running conversion */ + dev_private->control_1 &= 0xFFFC; + writew(dev_private->control_1, dev_private->me_regbase + ME_CONTROL_1); + + return 1; +} + +// ------------------------------------------------------------------ +// +// HARDWARE TRIGGERED ANALOG INPUT SECTION +// +// ------------------------------------------------------------------ + +// +// Cancel analog input autoscan +// +static int me_ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + /* disable interrupts */ + + /* stop any running conversion */ + dev_private->control_1 &= 0xFFFC; + writew(dev_private->control_1, dev_private->me_regbase + ME_CONTROL_1); + + return 0; +} + +// +// Test analog input command +// +static int me_ai_do_cmd_test(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd) +{ + return 0; +} + +// +// Analog input command +// +static int me_ai_do_cmd(comedi_device * dev, comedi_subdevice * subdevice) +{ + return 0; +} + +// ------------------------------------------------------------------ +// +// ANALOG OUTPUT SECTION +// +// ------------------------------------------------------------------ + +// +// Analog instant output +// +static int me_ao_insn_write(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int chan; + int rang; + int i; + + /* Enable all DAC */ + dev_private->control_2 |= ENABLE_DAC; + writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2); + + /* and set DAC to "buffered" mode */ + dev_private->control_2 |= BUFFERED_DAC; + writew(dev_private->control_2, dev_private->me_regbase + ME_CONTROL_2); + + /* Set dac-control register */ + for (i = 0; i < insn->n; i++) { + chan = CR_CHAN((&insn->chanspec)[i]); + rang = CR_RANGE((&insn->chanspec)[i]); + + dev_private->dac_control &= ~(0x0880 >> chan); /* clear bits for this channel */ + if (rang == 0) + dev_private->dac_control |= + ((DAC_BIPOLAR_A | DAC_GAIN_1_A) >> chan); + else if (rang == 1) + dev_private->dac_control |= + ((DAC_BIPOLAR_A | DAC_GAIN_0_A) >> chan); + } + writew(dev_private->dac_control, + dev_private->me_regbase + ME_DAC_CONTROL); + + /* Update dac-control register */ + readw(dev_private->me_regbase + ME_DAC_CONTROL_UPDATE); + + /* Set data register */ + for (i = 0; i < insn->n; i++) { + chan = CR_CHAN((&insn->chanspec)[i]); + writew((data[0] & s->maxdata), + dev_private->me_regbase + ME_DAC_DATA_A + (chan << 1)); + dev_private->ao_readback[chan] = (data[0] & s->maxdata); + } + + /* Update dac with data registers */ + readw(dev_private->me_regbase + ME_DAC_UPDATE); + + return i; +} + +// +// Analog output readback +// +static int me_ao_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i; + + for (i = 0; i < insn->n; i++) { + data[i] = + dev_private->ao_readback[CR_CHAN((&insn->chanspec)[i])]; + } + + return 1; +} + +// ------------------------------------------------------------------ +// +// INITIALISATION SECTION +// +// ------------------------------------------------------------------ + +// +// Xilinx firmware download for card: ME-2600i +// + +static int me2600_xilinx_download(comedi_device * dev, unsigned char + *me2600_firmware, unsigned int length) +{ + unsigned int value; + unsigned int file_length; + unsigned int i; + + /* disable irq's on PLX */ + writel(0x00, dev_private->plx_regbase + PLX_INTCSR); + + /* First, make a dummy read to reset xilinx */ + value = readw(dev_private->me_regbase + XILINX_DOWNLOAD_RESET); + + /* Wait until reset is over */ + sleep(1); + + /* Write a dummy value to Xilinx */ + writeb(0x00, dev_private->me_regbase + 0x0); + sleep(1); + + /* + * Format of the firmware + * Build longs from the byte-wise coded header + * Byte 1-3: length of the array + * Byte 4-7: version + * Byte 8-11: date + * Byte 12-15: reserved + */ + if (length < 16) + return -EINVAL; + file_length = + (((unsigned int)me2600_firmware[0] & 0xff) << 24) + + (((unsigned int)me2600_firmware[1] & 0xff) << 16) + + (((unsigned int)me2600_firmware[2] & 0xff) << 8) + + ((unsigned int)me2600_firmware[3] & 0xff); + + /* + * Loop for writing firmware byte by byte to xilinx + * Firmware data start at offfset 16 + */ + for (i = 0; i < file_length; i++) { + writeb((me2600_firmware[16 + i] & 0xff), + dev_private->me_regbase + 0x0); + } + + /* Write 5 dummy values to xilinx */ + for (i = 0; i < 5; i++) { + writeb(0x00, dev_private->me_regbase + 0x0); + } + + /* Test if there was an error during download -> INTB was thrown */ + value = readl(dev_private->plx_regbase + PLX_INTCSR); + if (value & 0x20) { + /* Disable interrupt */ + writel(0x00, dev_private->plx_regbase + PLX_INTCSR); + printk("comedi%d: Xilinx download failed\n", dev->minor); + return -EIO; + } + + /* Wait until the Xilinx is ready for real work */ + sleep(1); + + /* Enable PLX-Interrupts */ + writel(0x43, dev_private->plx_regbase + PLX_INTCSR); + + return 0; +} + +// +// Reset device +// + +static int me_reset(comedi_device * dev) +{ + /* Reset board */ + writew(0x00, dev_private->me_regbase + ME_CONTROL_1); + writew(0x00, dev_private->me_regbase + ME_CONTROL_2); + writew(0x00, dev_private->me_regbase + ME_RESET_INTERRUPT); + writew(0x00, dev_private->me_regbase + ME_DAC_CONTROL); + + /* Save values in the board context */ + dev_private->dac_control = 0; + dev_private->control_1 = 0; + dev_private->control_2 = 0; + + return 0; +} + +// +// Attach +// +// - Register PCI device +// - Declare device driver capability +// + +static int me_attach(comedi_device * dev, comedi_devconfig * it) +{ + struct pci_dev *pci_device; + comedi_subdevice *subdevice; + me_board_struct *board; + resource_size_t plx_regbase_tmp; + unsigned long plx_regbase_size_tmp; + resource_size_t me_regbase_tmp; + unsigned long me_regbase_size_tmp; + resource_size_t swap_regbase_tmp; + unsigned long swap_regbase_size_tmp; + resource_size_t regbase_tmp; + int result, error, i; + + // Allocate private memory + if (alloc_private(dev, sizeof(me_private_data_struct)) < 0) { + return -ENOMEM; + } +// +// Probe the device to determine what device in the series it is. +// + for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pci_device != NULL; + pci_device = + pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) { + if (pci_device->vendor == PCI_VENDOR_ID_MEILHAUS) { + for (i = 0; i < me_board_nbr; i++) { + if (me_boards[i].device_id == + pci_device->device) { + // was a particular bus/slot requested? + if ((it->options[0] != 0) + || (it->options[1] != 0)) { + // are we on the wrong bus/slot? + if (pci_device->bus->number != + it->options[0] + || PCI_SLOT(pci_device-> + devfn) != + it->options[1]) { + continue; + } + } + + dev->board_ptr = me_boards + i; + board = (me_board_struct *) dev-> + board_ptr; + dev_private->pci_device = pci_device; + goto found; + } + } + } + } + + printk("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n", + dev->minor, it->options[0], it->options[1]); + return -EIO; + + found: + + printk("comedi%d: found %s at PCI bus %d, slot %d\n", + dev->minor, me_boards[i].name, + pci_device->bus->number, PCI_SLOT(pci_device->devfn)); + + // Enable PCI device and request PCI regions + if (comedi_pci_enable(pci_device, ME_DRIVER_NAME) < 0) { + printk("comedi%d: Failed to enable PCI device and request regions\n", dev->minor); + return -EIO; + } + // Set data in device structure + + dev->board_name = board->name; + + // Read PLX register base address [PCI_BASE_ADDRESS #0]. + + plx_regbase_tmp = pci_resource_start(pci_device, 0); + plx_regbase_size_tmp = pci_resource_len(pci_device, 0); + dev_private->plx_regbase = + ioremap(plx_regbase_tmp, plx_regbase_size_tmp); + dev_private->plx_regbase_size = plx_regbase_size_tmp; + if (!dev_private->plx_regbase) { + printk("comedi%d: Failed to remap I/O memory\n", dev->minor); + return -ENOMEM; + } + // Read Swap base address [PCI_BASE_ADDRESS #5]. + + swap_regbase_tmp = pci_resource_start(pci_device, 5); + swap_regbase_size_tmp = pci_resource_len(pci_device, 5); + + if (!swap_regbase_tmp) { + printk("comedi%d: Swap not present\n", dev->minor); + } + + /*----------------------------------------------------- Workaround start ---*/ + if (plx_regbase_tmp & 0x0080) { + printk("comedi%d: PLX-Bug detected\n", dev->minor); + + if (swap_regbase_tmp) { + regbase_tmp = plx_regbase_tmp; + plx_regbase_tmp = swap_regbase_tmp; + swap_regbase_tmp = regbase_tmp; + + result = pci_write_config_dword(pci_device, + PCI_BASE_ADDRESS_0, plx_regbase_tmp); + if (result != PCIBIOS_SUCCESSFUL) + return -EIO; + + result = pci_write_config_dword(pci_device, + PCI_BASE_ADDRESS_5, swap_regbase_tmp); + if (result != PCIBIOS_SUCCESSFUL) + return -EIO; + } else { + plx_regbase_tmp -= 0x80; + result = pci_write_config_dword(pci_device, + PCI_BASE_ADDRESS_0, plx_regbase_tmp); + if (result != PCIBIOS_SUCCESSFUL) + return -EIO; + } + } + /*----------------------------------------------------- Workaround end -----*/ + + // Read Meilhaus register base address [PCI_BASE_ADDRESS #2]. + + me_regbase_tmp = pci_resource_start(pci_device, 2); + me_regbase_size_tmp = pci_resource_len(pci_device, 2); + dev_private->me_regbase_size = me_regbase_size_tmp; + dev_private->me_regbase = ioremap(me_regbase_tmp, me_regbase_size_tmp); + if (!dev_private->me_regbase) { + printk("comedi%d: Failed to remap I/O memory\n", dev->minor); + return -ENOMEM; + } + // Download firmware and reset card + if (board->device_id == ME2600_DEVICE_ID) { + unsigned char *aux_data; + int aux_len; + + aux_data = comedi_aux_data(it->options, 0); + aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; + + if (!aux_data || aux_len < 1) { + comedi_error(dev, + "You must provide me2600 firmware using the --init-data option of comedi_config"); + return -EINVAL; + } + me2600_xilinx_download(dev, aux_data, aux_len); + } + + me_reset(dev); + + // device driver capabilities + + if ((error = alloc_subdevices(dev, 3)) < 0) + return error; + + subdevice = dev->subdevices + 0; + subdevice->type = COMEDI_SUBD_AI; + subdevice->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_CMD_READ; + subdevice->n_chan = board->ai_channel_nbr; + subdevice->maxdata = board->ai_resolution_mask; + subdevice->len_chanlist = board->ai_channel_nbr; + subdevice->range_table = board->ai_range_list; + subdevice->cancel = me_ai_cancel; + subdevice->insn_read = me_ai_insn_read; + subdevice->do_cmdtest = me_ai_do_cmd_test; + subdevice->do_cmd = me_ai_do_cmd; + + subdevice = dev->subdevices + 1; + subdevice->type = COMEDI_SUBD_AO; + subdevice->subdev_flags = SDF_WRITEABLE | SDF_COMMON; + subdevice->n_chan = board->ao_channel_nbr; + subdevice->maxdata = board->ao_resolution_mask; + subdevice->len_chanlist = board->ao_channel_nbr; + subdevice->range_table = board->ao_range_list; + subdevice->insn_read = me_ao_insn_read; + subdevice->insn_write = me_ao_insn_write; + + subdevice = dev->subdevices + 2; + subdevice->type = COMEDI_SUBD_DIO; + subdevice->subdev_flags = SDF_READABLE | SDF_WRITEABLE; + subdevice->n_chan = board->dio_channel_nbr; + subdevice->maxdata = 1; + subdevice->len_chanlist = board->dio_channel_nbr; + subdevice->range_table = &range_digital; + subdevice->insn_bits = me_dio_insn_bits; + subdevice->insn_config = me_dio_insn_config; + subdevice->io_bits = 0; + + printk("comedi%d: " ME_DRIVER_NAME " attached.\n", dev->minor); + return 0; +} + +// +// Detach +// + +static int me_detach(comedi_device * dev) +{ + if (dev_private) { + if (dev_private->me_regbase) { + me_reset(dev); + iounmap(dev_private->me_regbase); + } + if (dev_private->plx_regbase) + iounmap(dev_private->plx_regbase); + if (dev_private->pci_device) { + if (dev_private->plx_regbase_size) { + comedi_pci_disable(dev_private->pci_device); + } + pci_dev_put(dev_private->pci_device); + } + } + return 0; +}