From: Alex Williamson <alex.williamson@redhat.com>
Date: Mon, 19 Jul 2010 15:45:34 +0000 (-0600)
Subject: PCI: Allow read/write access to sysfs I/O port resources
X-Git-Tag: v2.6.36-rc1~518^2~7
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8633328be242677fdedc42052838dd0608e7f342;p=karo-tx-linux.git

PCI: Allow read/write access to sysfs I/O port resources

PCI sysfs resource files currently only allow mmap'ing.  On x86 this
works fine for memory backed BARs, but doesn't work at all for I/O
port backed BARs.  Add read/write to I/O port PCI sysfs resource
files to allow userspace access to these device regions.

Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---

diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 85354b32d731..74eaac26f8b8 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -39,7 +39,7 @@ files, each with their own function.
        local_cpus	   nearby CPU mask (cpumask, ro)
        remove		   remove device from kernel's list (ascii, wo)
        resource		   PCI resource host addresses (ascii, ro)
-       resource0..N	   PCI resource N, if present (binary, mmap)
+       resource0..N	   PCI resource N, if present (binary, mmap, rw[1])
        resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
        rom		   PCI ROM resource, if present (binary, ro)
        subsystem_device	   PCI subsystem device (ascii, ro)
@@ -54,13 +54,16 @@ files, each with their own function.
   binary - file contains binary data
   cpumask - file contains a cpumask type
 
+[1] rw for RESOURCE_IO (I/O port) regions only
+
 The read only files are informational, writes to them will be ignored, with
 the exception of the 'rom' file.  Writable files can be used to perform
 actions on the device (e.g. changing config space, detaching a device).
 mmapable files are available via an mmap of the file at offset 0 and can be
 used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
-value from any attempted mmap.
+value from any attempted mmap.  The most notable of these are I/O port
+resources, which also provide read/write access.
 
 The 'enable' file provides a counter that indicates how many times the device 
 has been enabled.  If the 'enable' file currently returns '4', and a '1' is
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 5935b854917f..f7692dc531e4 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -778,6 +778,70 @@ pci_mmap_resource_wc(struct file *filp, struct kobject *kobj,
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
+static ssize_t
+pci_resource_io(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count, bool write)
+{
+	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
+						       struct device, kobj));
+	struct resource *res = attr->private;
+	unsigned long port = off;
+	int i;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		if (res == &pdev->resource[i])
+			break;
+	if (i >= PCI_ROM_RESOURCE)
+		return -ENODEV;
+
+	port += pci_resource_start(pdev, i);
+
+	if (port > pci_resource_end(pdev, i))
+		return 0;
+
+	if (port + count - 1 > pci_resource_end(pdev, i))
+		return -EINVAL;
+
+	switch (count) {
+	case 1:
+		if (write)
+			outb(*(u8 *)buf, port);
+		else
+			*(u8 *)buf = inb(port);
+		return 1;
+	case 2:
+		if (write)
+			outw(*(u16 *)buf, port);
+		else
+			*(u16 *)buf = inw(port);
+		return 2;
+	case 4:
+		if (write)
+			outl(*(u32 *)buf, port);
+		else
+			*(u32 *)buf = inl(port);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+static ssize_t
+pci_read_resource_io(struct file *filp, struct kobject *kobj,
+		     struct bin_attribute *attr, char *buf,
+		     loff_t off, size_t count)
+{
+	return pci_resource_io(filp, kobj, attr, buf, off, count, false);
+}
+
+static ssize_t
+pci_write_resource_io(struct file *filp, struct kobject *kobj,
+		      struct bin_attribute *attr, char *buf,
+		      loff_t off, size_t count)
+{
+	return pci_resource_io(filp, kobj, attr, buf, off, count, true);
+}
+
 /**
  * pci_remove_resource_files - cleanup resource files
  * @pdev: dev to cleanup
@@ -828,6 +892,10 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 			sprintf(res_attr_name, "resource%d", num);
 			res_attr->mmap = pci_mmap_resource_uc;
 		}
+		if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+			res_attr->read = pci_read_resource_io;
+			res_attr->write = pci_write_resource_io;
+		}
 		res_attr->attr.name = res_attr_name;
 		res_attr->attr.mode = S_IRUSR | S_IWUSR;
 		res_attr->size = pci_resource_len(pdev, num);