From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Date: Thu, 6 Nov 2014 12:01:41 +0000 (+0100)
Subject: ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=86f9abb6ec730441731bc5aff3e3865c9186bb13;p=linux-beck.git

ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.

UART2 is used to connect the processor with the bluetooth chip, these pins
are not common between IGEPv2 boards and IGEP COM MODULE boards. This patch
muxes the correct pins for every board and removes UART2 configuration from
common omap3-igep.dtsi file.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index e2d163bf0619..fb1040da4c9e 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -53,13 +53,6 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
 			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
@@ -198,11 +191,6 @@
        pinctrl-0 = <&uart1_pins>;
 };
 
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
 &uart3 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart3_pins>;
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index cc9343e836c6..87d77e4ce6f8 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -149,6 +149,15 @@
 			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -256,6 +265,11 @@
 	};
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
 &usbhshost {
 	port1-mode = "ehci-phy";
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 84b74527c544..2df13964f7e7 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -46,6 +46,17 @@
 	};
 };
 
+&omap3_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+};
+
 &omap3_pmx_core2 {
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -104,3 +115,8 @@
 		};
 	};
 };
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};