From: Auke Kok Date: Tue, 8 Jul 2008 22:08:29 +0000 (-0700) Subject: igb: reenable CRC stripping in hardware X-Git-Tag: v2.6.27-rc1~969^2~146^2~13 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=87cb7e8cc59c89ccdcf243671c932179bb651a71;p=karo-tx-linux.git igb: reenable CRC stripping in hardware We can remove a clunky workaround for not having the hardware strip the CRC. 82575 silicon as well as the older PCI Express e1000e hardware all work OK in this respect. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index e8ef5410591a..ae329c02eaef 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1664,10 +1664,12 @@ static void igb_setup_rctl(struct igb_adapter *adapter) E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - /* disable the stripping of CRC because it breaks - * BMC firmware connected over SMBUS - rctl |= E1000_RCTL_SECRC; + /* + * enable stripping of CRC. It's unlikely this will break BMC + * redirection as it did with e1000. Newer features require + * that the HW strips the CRC. */ + rctl |= E1000_RCTL_SECRC; rctl &= ~E1000_RCTL_SBP; @@ -3743,7 +3745,6 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, } } send_up: - pskb_trim(skb, skb->len - 4); i++; if (i == rx_ring->count) i = 0;