From: Roger Quadros Date: Fri, 14 Jun 2013 09:51:42 +0000 (+0300) Subject: usb: ehci-omap: select NOP_USB_XCEIV PHY driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=88650d62a12de7fb9437b5508cc7f6b28da58cbf;p=linux-beck.git usb: ehci-omap: select NOP_USB_XCEIV PHY driver ehci-omap needs NOP_USB_XCEIV PHY driver to function properly, so select it. As the USB PHY drivers no longer depend on USB_PHY, it is safe to select the PHY drivers. Signed-off-by: Roger Quadros Tested-by: Adrien Vergé Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3102b522ca02..5064e06e25b4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -148,13 +148,11 @@ config USB_EHCI_MXC config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" depends on ARCH_OMAP + select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. - If your system uses a PHY on the USB port, you will need to - enable USB_PHY and the appropriate PHY driver as well. Most - boards need the NOP_USB_XCEIV PHY driver. config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller"