From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Tue, 26 Apr 2016 10:11:28 +0000 (+0200)
Subject: ARM: dts: at91: VInCo: fix phy reset gpio flag
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=88677db54dba68ce19952d5bcdf0fda43094b31f;p=linux-beck.git

ARM: dts: at91: VInCo: fix phy reset gpio flag

Fix gpio active flag for the phy reset-gpios property. The line is
active low instead of active high.
Actually, this flags was never used by the macb driver.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---

diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 79aec55e1ebc..6a366ee952a8 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -118,7 +118,7 @@
 
 				ethernet-phy@1 {
 					reg = <0x1>;
-					reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 					interrupt-parent = <&pioB>;
 					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 				};
@@ -162,7 +162,7 @@
 					reg = <0x1>;
 					interrupt-parent = <&pioB>;
 					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-					reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
 				};
 			};