From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 13 Mar 2015 21:04:35 +0000 (-0700)
Subject: ixgbe: enable relaxed ordering for SPARC
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=887012e80aeaf36968456e8085abf41aee907707;p=linux-beck.git

ixgbe: enable relaxed ordering for SPARC

This patch makes sure that relaxed ordering is not disabled when
on SPARC, where it helps with performance.

CC: <kernel-team@fb.com>
CC: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
---

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 51628b30cb1c..824a7ab79ab6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -171,17 +171,21 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
  *  @hw: pointer to hardware structure
  *
  *  Starts the hardware using the generic start_hw function.
- *  Disables relaxed ordering Then set pcie completion timeout
+ *  Disables relaxed ordering for archs other than SPARC
+ *  Then set pcie completion timeout
  *
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
+#ifndef CONFIG_SPARC
 	u32 regval;
 	u32 i;
+#endif
 	s32 ret_val;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
+#ifndef CONFIG_SPARC
 	/* Disable relaxed ordering */
 	for (i = 0; ((i < hw->mac.max_tx_queues) &&
 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
@@ -197,7 +201,7 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
-
+#endif
 	if (ret_val)
 		return ret_val;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 13b58f97b439..06d8f3cfa099 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -312,7 +312,6 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 {
 	u32 i;
-	u32 regval;
 
 	/* Clear the rate limiters */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
@@ -321,20 +320,25 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
+#ifndef CONFIG_SPARC
 	/* Disable relaxed ordering */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		u32 regval;
+
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
 		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
 	}
 
 	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		u32 regval;
+
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
 		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
 			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
-
+#endif
 	return 0;
 }