From: Matti Gottlieb Date: Tue, 9 Jul 2013 12:25:46 +0000 (+0300) Subject: iwlwifi: mvm: Enable user set TX power X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=88f2fd7300da1b671255ef26469627206fe20a8e;p=linux-beck.git iwlwifi: mvm: Enable user set TX power Support Tx power limitations. These limitations can come from mac80211 for various reasons. Signed-off-by: Matti Gottlieb Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index acd2665afb8c..b76a9a8fc0b3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -118,6 +118,7 @@ static const u8 iwl_nvm_channels[] = { #define LAST_2GHZ_HT_PLUS 9 #define LAST_5GHZ_HT 161 +#define DEFAULT_MAX_TX_POWER 16 /* rate data (static) */ static struct ieee80211_rate iwl_cfg80211_rates[] = { @@ -232,8 +233,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, /* Initialize regulatory-based run-time data */ - /* TODO: read the real value from the NVM */ - channel->max_power = 0; + /* + * Default value - highest tx power value. max_power + * is not used in mvm, and is used for backwards compatibility + */ + channel->max_power = DEFAULT_MAX_TX_POWER; is_5ghz = channel->band == IEEE80211_BAND_5GHZ; IWL_DEBUG_EEPROM(dev, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 28cab821c9f4..55854a309f94 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -159,6 +159,7 @@ enum { TX_ANT_CONFIGURATION_CMD = 0x98, BT_CONFIG = 0x9b, STATISTICS_NOTIFICATION = 0x9d, + REDUCE_TX_POWER_CMD = 0x9f, /* RF-KILL commands and notifications */ CARD_STATE_CMD = 0xa0, @@ -226,6 +227,19 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; +/** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + /* * Calibration control struct. * Sent as part of the phy configuration command. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 30319e069f45..fbb8c2dc66e0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -714,6 +714,20 @@ out_release: mutex_unlock(&mvm->mutex); } +static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + s8 tx_power) +{ + /* FW is in charge of regulatory enforcement */ + struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = { + .mac_context_id = iwl_mvm_vif_from_mac80211(vif)->id, + .pwr_restriction = cpu_to_le16(tx_power), + }; + + return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, CMD_SYNC, + sizeof(reduce_txpwr_cmd), + &reduce_txpwr_cmd); +} + static int iwl_mvm_mac_config(struct ieee80211_hw *hw, u32 changed) { return 0; @@ -794,6 +808,11 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, if (ret) IWL_ERR(mvm, "failed to update power mode\n"); } + if (changes & BSS_CHANGED_TXPOWER) { + IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n", + bss_conf->txpower); + iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower); + } } static int iwl_mvm_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif) diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 5d5dedddd2dc..70ac726c0265 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -275,6 +275,7 @@ static const char *iwl_mvm_cmd_strings[REPLY_MAX] = { CMD(BEACON_NOTIFICATION), CMD(BEACON_TEMPLATE_CMD), CMD(STATISTICS_NOTIFICATION), + CMD(REDUCE_TX_POWER_CMD), CMD(TX_ANT_CONFIGURATION_CMD), CMD(D3_CONFIG_CMD), CMD(PROT_OFFLOAD_CONFIG_CMD),