From: Chris Pascoe Date: Sun, 2 Dec 2007 12:39:18 +0000 (-0300) Subject: V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz channels X-Git-Tag: v2.6.25-rc1~1235^2~169 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=897b842296f1285a6b58e9170f7017022e2e2603;p=karo-tx-linux.git V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz channels We have been inserting a mystery 500kHz offset for tuning 7MHz channels, however some experimentation reveals it is only needed under certain conditions with specific firmware combinations. Document these and only apply the offset when we know it is required. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index a6b05dfd6703..63a6fca1f8cf 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -875,7 +875,16 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, rc = send_seq(priv, {0x00, 0x00}); } else { offset = 2750000; - if (priv->cur_fw.type & DTV7) + /* + * We must adjust the offset by 500kHz in two cases in order + * to correctly center the IF output: + * 1) When the ZARLINK456 or DIBCOM52 tables were explicitly + * selected and a 7MHz channel is tuned; + * 2) When tuning a VHF channel with DTV78 firmware. + */ + if (((priv->cur_fw.type & DTV7) && + (priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) || + ((priv->cur_fw.type & DTV78) && freq < 470000000)) offset -= 500000; }