From: Samuel Mendoza-Jonas Date: Mon, 1 May 2017 00:39:01 +0000 (+1000) Subject: hwmon: (pmbus) Add client driver for IR35221 X-Git-Tag: v4.13-rc1~178^2~17 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8991ebd9c9a69dcc03f5a961718a7a3184c1295d;p=karo-tx-linux.git hwmon: (pmbus) Add client driver for IR35221 IR35221 is a Digital DC-DC Multiphase Converter Signed-off-by: Samuel Mendoza-Jonas [groeck: Preserve alphabetic order in Kconfig; add missing break statements (from Dan Carpenter); add missing error checks] Signed-off-by: Guenter Roeck --- diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 new file mode 100644 index 000000000000..f7e112752c04 --- /dev/null +++ b/Documentation/hwmon/ir35221 @@ -0,0 +1,87 @@ +Kernel driver ir35221 +===================== + +Supported chips: + * Infinion IR35221 + Prefix: 'ir35221' + Addresses scanned: - + Datasheet: Datasheet is not publicly available. + +Author: Samuel Mendoza-Jonas + + +Description +----------- + +IR35221 is a Digital DC-DC Multiphase Converter + + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Example: the following commands will load the driver for an IR35221 +at address 0x70 on I2C bus #4: + +# modprobe ir35221 +# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device + + +Sysfs attributes +---------------- + +curr1_label "iin" +curr1_input Measured input current +curr1_max Maximum current +curr1_max_alarm Current high alarm + +curr[2-3]_label "iout[1-2]" +curr[2-3]_input Measured output current +curr[2-3]_crit Critical maximum current +curr[2-3]_crit_alarm Current critical high alarm +curr[2-3]_highest Highest output current +curr[2-3]_lowest Lowest output current +curr[2-3]_max Maximum current +curr[2-3]_max_alarm Current high alarm + +in1_label "vin" +in1_input Measured input voltage +in1_crit Critical maximum input voltage +in1_crit_alarm Input voltage critical high alarm +in1_highest Highest input voltage +in1_lowest Lowest input voltage +in1_min Minimum input voltage +in1_min_alarm Input voltage low alarm + +in[2-3]_label "vout[1-2]" +in[2-3]_input Measured output voltage +in[2-3]_lcrit Critical minimum output voltage +in[2-3]_lcrit_alarm Output voltage critical low alarm +in[2-3]_crit Critical maximum output voltage +in[2-3]_crit_alarm Output voltage critical high alarm +in[2-3]_highest Highest output voltage +in[2-3]_lowest Lowest output voltage +in[2-3]_max Maximum output voltage +in[2-3]_max_alarm Output voltage high alarm +in[2-3]_min Minimum output voltage +in[2-3]_min_alarm Output voltage low alarm + +power1_label "pin" +power1_input Measured input power +power1_alarm Input power high alarm +power1_max Input power limit + +power[2-3]_label "pout[1-2]" +power[2-3]_input Measured output power +power[2-3]_max Output power limit +power[2-3]_max_alarm Output power high alarm + +temp[1-2]_input Measured temperature +temp[1-2]_crit Critical high temperature +temp[1-2]_crit_alarm Chip temperature critical high alarm +temp[1-2]_highest Highest temperature +temp[1-2]_lowest Lowest temperature +temp[1-2]_max Maximum temperature +temp[1-2]_max_alarm Chip temperature high alarm diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index cad1229b7e17..68d717a3fd59 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -37,6 +37,16 @@ config SENSORS_ADM1275 This driver can also be built as a module. If so, the module will be called adm1275. +config SENSORS_IR35221 + tristate "Infineon IR35221" + default n + help + If you say yes here you get hardware monitoring support for the + Infineon IR35221 controller. + + This driver can also be built as a module. If so, the module will + be called ir35521. + config SENSORS_LM25066 tristate "National Semiconductor LM25066 and compatibles" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 562132054aaf..75bb7ca619d9 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o +obj-$(CONFIG_SENSORS_IR35221) += ir35221.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o diff --git a/drivers/hwmon/pmbus/ir35221.c b/drivers/hwmon/pmbus/ir35221.c new file mode 100644 index 000000000000..8b906b44484b --- /dev/null +++ b/drivers/hwmon/pmbus/ir35221.c @@ -0,0 +1,337 @@ +/* + * Hardware monitoring driver for IR35221 + * + * Copyright (C) IBM Corporation 2017. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "pmbus.h" + +#define IR35221_MFR_VIN_PEAK 0xc5 +#define IR35221_MFR_VOUT_PEAK 0xc6 +#define IR35221_MFR_IOUT_PEAK 0xc7 +#define IR35221_MFR_TEMP_PEAK 0xc8 +#define IR35221_MFR_VIN_VALLEY 0xc9 +#define IR35221_MFR_VOUT_VALLEY 0xca +#define IR35221_MFR_IOUT_VALLEY 0xcb +#define IR35221_MFR_TEMP_VALLEY 0xcc + +static long ir35221_reg2data(int data, enum pmbus_sensor_classes class) +{ + s16 exponent; + s32 mantissa; + long val; + + /* We only modify LINEAR11 formats */ + exponent = ((s16)data) >> 11; + mantissa = ((s16)((data & 0x7ff) << 5)) >> 5; + + val = mantissa * 1000L; + + /* scale result to micro-units for power sensors */ + if (class == PSC_POWER) + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 ir35221_data2reg(long val, enum pmbus_sensor_classes class) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + if (val == 0) + return 0; + + if (val < 0) { + negative = true; + val = -val; + } + + /* Power is in uW. Convert to mW before converting. */ + if (class == PSC_POWER) + val = DIV_ROUND_CLOSEST(val, 1000L); + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + +static u16 ir35221_scale_result(s16 data, int shift, + enum pmbus_sensor_classes class) +{ + long val; + + val = ir35221_reg2data(data, class); + + if (shift < 0) + val >>= -shift; + else + val <<= shift; + + return ir35221_data2reg(val, class); +} + +static int ir35221_read_word_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, reg); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, 1, PSC_CURRENT_OUT); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, reg); + ret = ir35221_scale_result(ret, -4, PSC_VOLTAGE_IN); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, reg); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN); + break; + case PMBUS_READ_VIN: + ret = pmbus_read_word_data(client, page, PMBUS_READ_VIN); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN); + break; + case PMBUS_READ_IIN: + ret = pmbus_read_word_data(client, page, PMBUS_READ_IIN); + if (ret < 0) + break; + if (page == 0) + ret = ir35221_scale_result(ret, -4, PSC_CURRENT_IN); + else + ret = ir35221_scale_result(ret, -5, PSC_CURRENT_IN); + break; + case PMBUS_READ_POUT: + ret = pmbus_read_word_data(client, page, PMBUS_READ_POUT); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -1, PSC_POWER); + break; + case PMBUS_READ_PIN: + ret = pmbus_read_word_data(client, page, PMBUS_READ_PIN); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -1, PSC_POWER); + break; + case PMBUS_READ_IOUT: + ret = pmbus_read_word_data(client, page, PMBUS_READ_IOUT); + if (ret < 0) + break; + if (page == 0) + ret = ir35221_scale_result(ret, -1, PSC_CURRENT_OUT); + else + ret = ir35221_scale_result(ret, -2, PSC_CURRENT_OUT); + break; + case PMBUS_VIRT_READ_VIN_MAX: + ret = pmbus_read_word_data(client, page, IR35221_MFR_VIN_PEAK); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN); + break; + case PMBUS_VIRT_READ_VOUT_MAX: + ret = pmbus_read_word_data(client, page, IR35221_MFR_VOUT_PEAK); + break; + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, IR35221_MFR_IOUT_PEAK); + if (ret < 0) + break; + if (page == 0) + ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN); + else + ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN); + break; + case PMBUS_VIRT_READ_TEMP_MAX: + ret = pmbus_read_word_data(client, page, IR35221_MFR_TEMP_PEAK); + break; + case PMBUS_VIRT_READ_VIN_MIN: + ret = pmbus_read_word_data(client, page, + IR35221_MFR_VIN_VALLEY); + if (ret < 0) + break; + ret = ir35221_scale_result(ret, -5, PSC_VOLTAGE_IN); + break; + case PMBUS_VIRT_READ_VOUT_MIN: + ret = pmbus_read_word_data(client, page, + IR35221_MFR_VOUT_VALLEY); + break; + case PMBUS_VIRT_READ_IOUT_MIN: + ret = pmbus_read_word_data(client, page, + IR35221_MFR_IOUT_VALLEY); + if (ret < 0) + break; + if (page == 0) + ret = ir35221_scale_result(ret, -1, PSC_CURRENT_IN); + else + ret = ir35221_scale_result(ret, -2, PSC_CURRENT_IN); + break; + case PMBUS_VIRT_READ_TEMP_MIN: + ret = pmbus_read_word_data(client, page, + IR35221_MFR_TEMP_VALLEY); + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int ir35221_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + u16 val; + + switch (reg) { + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + val = ir35221_scale_result(word, -1, PSC_CURRENT_OUT); + ret = pmbus_write_word_data(client, page, reg, val); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + val = ir35221_scale_result(word, 4, PSC_VOLTAGE_IN); + ret = pmbus_write_word_data(client, page, reg, val); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + val = ir35221_scale_result(word, 1, PSC_CURRENT_IN); + ret = pmbus_write_word_data(client, page, reg, val); + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int ir35221_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + u8 buf[I2C_SMBUS_BLOCK_MAX]; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA + | I2C_FUNC_SMBUS_READ_WORD_DATA + | I2C_FUNC_SMBUS_READ_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); + if (ret < 0) { + dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n"); + return ret; + } + if (ret != 2 || strncmp(buf, "RI", strlen("RI"))) { + dev_err(&client->dev, "MFR_ID unrecognised\n"); + return -ENODEV; + } + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) { + dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n"); + return ret; + } + if (ret != 2 || !(buf[0] == 0x6c && buf[1] == 0x00)) { + dev_err(&client->dev, "MFR_MODEL unrecognised\n"); + return -ENODEV; + } + + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->write_word_data = ir35221_write_word_data; + info->read_word_data = ir35221_read_word_data; + + info->pages = 2; + info->format[PSC_VOLTAGE_IN] = linear; + info->format[PSC_VOLTAGE_OUT] = linear; + info->format[PSC_CURRENT_IN] = linear; + info->format[PSC_CURRENT_OUT] = linear; + info->format[PSC_POWER] = linear; + info->format[PSC_TEMPERATURE] = linear; + + info->func[0] = PMBUS_HAVE_VIN + | PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN + | PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN + | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP; + info->func[1] = info->func[0]; + + return pmbus_do_probe(client, id, info); +} + +static const struct i2c_device_id ir35221_id[] = { + {"ir35221", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, ir35221_id); + +static struct i2c_driver ir35221_driver = { + .driver = { + .name = "ir35221", + }, + .probe = ir35221_probe, + .remove = pmbus_do_remove, + .id_table = ir35221_id, +}; + +module_i2c_driver(ir35221_driver); + +MODULE_AUTHOR("Samuel Mendoza-Jonas