From: Sujith Manoharan Date: Sun, 16 Nov 2014 00:41:05 +0000 (+0530) Subject: ath9k: Fix thermometer programming X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=89b6e35c2032d74f51333fbf3635d980b3311c68;p=linux-beck.git ath9k: Fix thermometer programming The registers that control the on-chip thermometer need to be programmed based on the chainmask that the solution supports, not the chainmask that is present in the eeprom. Cc: Miaoqing Pan Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 80c6eacbda53..e726e405152c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4079,27 +4079,28 @@ static int ar9003_hw_get_thermometer(struct ath_hw *ah) static void ar9003_hw_thermometer_apply(struct ath_hw *ah) { + struct ath9k_hw_capabilities *pCap = &ah->caps; int thermometer = ar9003_hw_get_thermometer(ah); u8 therm_on = (thermometer < 0) ? 0 : 1; REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); - if (ah->caps.tx_chainmask & BIT(1)) + if (pCap->chip_chainmask & BIT(1)) REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); - if (ah->caps.tx_chainmask & BIT(2)) + if (pCap->chip_chainmask & BIT(2)) REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on); therm_on = (thermometer < 0) ? 0 : (thermometer == 0); REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on); - if (ah->caps.tx_chainmask & BIT(1)) { + if (pCap->chip_chainmask & BIT(1)) { therm_on = (thermometer < 0) ? 0 : (thermometer == 1); REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on); } - if (ah->caps.tx_chainmask & BIT(2)) { + if (pCap->chip_chainmask & BIT(2)) { therm_on = (thermometer < 0) ? 0 : (thermometer == 2); REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on);