From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 20 Jul 2011 16:26:24 +0000 (+0900)
Subject: ARM: S3C64XX: Configure backup battery charger on Cragganmore
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=89e1c3d0fffa0d610fa7292bbfafb5e87dc6be34;p=linux-beck.git

ARM: S3C64XX: Configure backup battery charger on Cragganmore

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 474f0d27e979..9026249233ad 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -474,6 +474,12 @@ static struct regulator_init_data vddalive __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
+static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+	.charger_enable = 1,
+	.vlim = 2500,  /* mV */
+	.ilim = 200,   /* uA */
+};
+
 static struct wm831x_status_pdata banff_red_led __initdata = {
 	.name = "banff:red:",
 	.default_src = WM831X_STATUS_MANUAL,
@@ -494,6 +500,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = GPIO_BOARD_START + 8,
 
+	.backup = &banff_backup_pdata,
+
 	.gpio_defaults = {
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,