From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Date: Mon, 1 Aug 2011 10:26:15 +0000 (-0700)
Subject: [SCSI] qla4xxx: Add get ACB state support using BSG
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8b0402e1383cd51121f05a1d249cde0212c28c99;p=mv-sheeva.git

[SCSI] qla4xxx: Add get ACB state support using BSG

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
---

diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
index 15032f130f2..de4db299bfc 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.c
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -139,6 +139,63 @@ leave:
 	return rval;
 }
 
+static int
+qla4xxx_get_acb_state(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint32_t status[MBOX_REG_COUNT];
+	uint32_t acb_idx;
+	uint32_t ip_idx;
+	int rval = -EINVAL;
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		goto leave;
+
+	/* Only 4022 and above adapters are supported */
+	if (is_qla4010(ha))
+		goto leave;
+
+	if (ql4xxx_reset_active(ha)) {
+		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+		rval = -EBUSY;
+		goto leave;
+	}
+
+	if (bsg_job->reply_payload.payload_len < sizeof(status)) {
+		ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n",
+			   __func__, bsg_job->reply_payload.payload_len);
+		rval = -EINVAL;
+		goto leave;
+	}
+
+	acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+
+	rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status);
+	if (rval) {
+		ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		rval = -EIO;
+	} else {
+		bsg_reply->reply_payload_rcv_len =
+			sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+					    bsg_job->reply_payload.sg_cnt,
+					    status, sizeof(status));
+		bsg_reply->result = DID_OK << 16;
+	}
+
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+leave:
+	return rval;
+}
+
 /**
  * qla4xxx_process_vendor_specific - handle vendor specific bsg request
  * @job: iscsi_bsg_job to handle
@@ -157,6 +214,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
 	case QLISCSI_VND_UPDATE_FLASH:
 		return qla4xxx_update_flash(bsg_job);
 
+	case QLISCSI_VND_GET_ACB_STATE:
+		return qla4xxx_get_acb_state(bsg_job);
+
 	default:
 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
 			   "0x%x\n", __func__, bsg_req->msgcode);
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
index 5f6424ee6c1..0400e1a0b67 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.h
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -10,5 +10,6 @@
 /* BSG Vendor specific commands */
 #define QLISCSI_VND_READ_FLASH		1
 #define QLISCSI_VND_UPDATE_FLASH	2
+#define QLISCSI_VND_GET_ACB_STATE	3
 
 #endif
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 98d4b17e8b1..5c876965166 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -58,6 +58,8 @@ int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 		    uint32_t *mbox_sts, dma_addr_t acb_dma);
 int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 		    uint32_t *mbox_sts, dma_addr_t acb_dma);
+int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
+			 uint32_t ip_idx, uint32_t *sts);
 void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session);
 u16 rd_nvram_word(struct scsi_qla_host *ha, int offset);
 u8 rd_nvram_byte(struct scsi_qla_host *ha, int offset);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 8741cfa9842..aec72309f60 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1667,3 +1667,26 @@ int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
 	}
 	return status;
 }
+
+int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
+			 uint32_t ip_idx, uint32_t *sts)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status = QLA_SUCCESS;
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+	mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE;
+	mbox_cmd[1] = acb_idx;
+	mbox_cmd[2] = ip_idx;
+
+	status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]);
+	if (status != QLA_SUCCESS) {
+		DEBUG2(ql4_printk(KERN_WARNING, ha,  "%s: "
+				  "MBOX_CMD_GET_IP_ADDR_STATE failed w/ "
+				  "status %04X\n", __func__, mbox_sts[0]));
+	}
+	memcpy(sts, mbox_sts, sizeof(mbox_sts));
+	return status;
+}