From: Javier Martinez Canillas Date: Mon, 2 May 2016 19:14:22 +0000 (-0300) Subject: [media] s5p-mfc: Don't try to put pm->clock if lookup failed X-Git-Tag: v4.8-rc1~152^2~315 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8b120e73e5d0c387767e7545be4dfcaaa05cfa00;p=karo-tx-linux.git [media] s5p-mfc: Don't try to put pm->clock if lookup failed Failing to get the struct s5p_mfc_pm .clock is a non-fatal error so the clock field can have a errno pointer value. But s5p_mfc_final_pm() only checks if .clock is not NULL before attempting to unprepare and put it. This leads to the following warning in clk_put() due s5p_mfc_final_pm(): WARNING: CPU: 3 PID: 1023 at drivers/clk/clk.c:2814 s5p_mfc_final_pm+0x48/0x74 [s5p_mfc] CPU: 3 PID: 1023 Comm: rmmod Tainted: G W 4.6.0-rc6-next-20160502-00005-g5a15a49106bc #9 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x88/0x9c) [] (dump_stack) from [] (__warn+0xe8/0x100) [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [] (warn_slowpath_null) from [] (s5p_mfc_final_pm+0x48/0x74 [s5p_mfc]) [] (s5p_mfc_final_pm [s5p_mfc]) from [] (s5p_mfc_remove+0x8c/0x94 [s5p_mfc]) [] (s5p_mfc_remove [s5p_mfc]) from [] (platform_drv_remove+0x24/0x3c) [] (platform_drv_remove) from [] (__device_release_driver+0x84/0x110) [] (__device_release_driver) from [] (driver_detach+0xac/0xb0) [] (driver_detach) from [] (bus_remove_driver+0x4c/0xa0) [] (bus_remove_driver) from [] (SyS_delete_module+0x174/0x1b8) [] (SyS_delete_module) from [] (ret_fast_syscall+0x0/0x3c) Assign the pointer to NULL in case of a lookup failure to fix the issue. Signed-off-by: Javier Martinez Canillas Acked-by: Arnd Bergmann Reviewed-by: Krzysztof Kozlowski Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index 5f97a3398c11..9f7522104333 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -54,6 +54,7 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) pm->clock = clk_get(&dev->plat_dev->dev, MFC_SCLK_NAME); if (IS_ERR(pm->clock)) { mfc_info("Failed to get MFC special clock control\n"); + pm->clock = NULL; } else { clk_set_rate(pm->clock, MFC_SCLK_RATE); ret = clk_prepare_enable(pm->clock);