From: Ian Abbott Date: Tue, 29 Jul 2014 11:58:18 +0000 (+0100) Subject: staging: comedi: amplc_pci230: add whitespace to register values X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8b39e8e973f91f9b80ba1a42e9be7e24eb040081;p=linux-beck.git staging: comedi: amplc_pci230: add whitespace to register values Several macros are defined for bit-field values within hardware registers. They are defined as left-shifted values. Add some whitespace around the left-shift operator. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index f94b542ca76d..4d3d3cbfe3a2 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -249,47 +249,47 @@ /* * DACCON read-write values. */ -#define PCI230_DAC_OR_UNI (0<<0) /* Output range unipolar */ -#define PCI230_DAC_OR_BIP (1<<0) /* Output range bipolar */ -#define PCI230_DAC_OR_MASK (1<<0) +#define PCI230_DAC_OR_UNI (0 << 0) /* Output range unipolar */ +#define PCI230_DAC_OR_BIP (1 << 0) /* Output range bipolar */ +#define PCI230_DAC_OR_MASK (1 << 0) /* * The following applies only if DAC FIFO support is enabled in the EXTFUNC * register (and only for PCI230+ hardware version 2 onwards). */ -#define PCI230P2_DAC_FIFO_EN (1<<8) /* FIFO enable */ +#define PCI230P2_DAC_FIFO_EN (1 << 8) /* FIFO enable */ /* * The following apply only if the DAC FIFO is enabled (and only for PCI230+ * hardware version 2 onwards). */ -#define PCI230P2_DAC_TRIG_NONE (0<<2) /* No trigger */ -#define PCI230P2_DAC_TRIG_SW (1<<2) /* Software trigger trigger */ -#define PCI230P2_DAC_TRIG_EXTP (2<<2) /* EXTTRIG +ve edge trigger */ -#define PCI230P2_DAC_TRIG_EXTN (3<<2) /* EXTTRIG -ve edge trigger */ -#define PCI230P2_DAC_TRIG_Z2CT0 (4<<2) /* CT0-OUT +ve edge trigger */ -#define PCI230P2_DAC_TRIG_Z2CT1 (5<<2) /* CT1-OUT +ve edge trigger */ -#define PCI230P2_DAC_TRIG_Z2CT2 (6<<2) /* CT2-OUT +ve edge trigger */ -#define PCI230P2_DAC_TRIG_MASK (7<<2) -#define PCI230P2_DAC_FIFO_WRAP (1<<7) /* FIFO wraparound mode */ -#define PCI230P2_DAC_INT_FIFO_EMPTY (0<<9) /* FIFO interrupt empty */ -#define PCI230P2_DAC_INT_FIFO_NEMPTY (1<<9) -#define PCI230P2_DAC_INT_FIFO_NHALF (2<<9) /* FIFO intr not half full */ -#define PCI230P2_DAC_INT_FIFO_HALF (3<<9) -#define PCI230P2_DAC_INT_FIFO_NFULL (4<<9) /* FIFO interrupt not full */ -#define PCI230P2_DAC_INT_FIFO_FULL (5<<9) -#define PCI230P2_DAC_INT_FIFO_MASK (7<<9) +#define PCI230P2_DAC_TRIG_NONE (0 << 2) /* No trigger */ +#define PCI230P2_DAC_TRIG_SW (1 << 2) /* Software trigger trigger */ +#define PCI230P2_DAC_TRIG_EXTP (2 << 2) /* EXTTRIG +ve edge trigger */ +#define PCI230P2_DAC_TRIG_EXTN (3 << 2) /* EXTTRIG -ve edge trigger */ +#define PCI230P2_DAC_TRIG_Z2CT0 (4 << 2) /* CT0-OUT +ve edge trigger */ +#define PCI230P2_DAC_TRIG_Z2CT1 (5 << 2) /* CT1-OUT +ve edge trigger */ +#define PCI230P2_DAC_TRIG_Z2CT2 (6 << 2) /* CT2-OUT +ve edge trigger */ +#define PCI230P2_DAC_TRIG_MASK (7 << 2) +#define PCI230P2_DAC_FIFO_WRAP (1 << 7) /* FIFO wraparound mode */ +#define PCI230P2_DAC_INT_FIFO_EMPTY (0 << 9) /* FIFO interrupt empty */ +#define PCI230P2_DAC_INT_FIFO_NEMPTY (1 << 9) +#define PCI230P2_DAC_INT_FIFO_NHALF (2 << 9) /* FIFO intr not half full */ +#define PCI230P2_DAC_INT_FIFO_HALF (3 << 9) +#define PCI230P2_DAC_INT_FIFO_NFULL (4 << 9) /* FIFO interrupt not full */ +#define PCI230P2_DAC_INT_FIFO_FULL (5 << 9) +#define PCI230P2_DAC_INT_FIFO_MASK (7 << 9) /* * DACCON read-only values. */ -#define PCI230_DAC_BUSY (1<<1) /* DAC busy. */ +#define PCI230_DAC_BUSY (1 << 1) /* DAC busy. */ /* * The following apply only if the DAC FIFO is enabled (and only for PCI230+ * hardware version 2 onwards). */ -#define PCI230P2_DAC_FIFO_UNDERRUN_LATCHED (1<<5) /* Underrun error */ -#define PCI230P2_DAC_FIFO_EMPTY (1<<13) /* FIFO empty */ -#define PCI230P2_DAC_FIFO_FULL (1<<14) /* FIFO full */ -#define PCI230P2_DAC_FIFO_HALF (1<<15) /* FIFO half full */ +#define PCI230P2_DAC_FIFO_UNDERRUN_LATCHED (1 << 5) /* Underrun error */ +#define PCI230P2_DAC_FIFO_EMPTY (1 << 13) /* FIFO empty */ +#define PCI230P2_DAC_FIFO_FULL (1 << 14) /* FIFO full */ +#define PCI230P2_DAC_FIFO_HALF (1 << 15) /* FIFO half full */ /* * DACCON write-only, transient values. @@ -298,8 +298,8 @@ * The following apply only if the DAC FIFO is enabled (and only for PCI230+ * hardware version 2 onwards). */ -#define PCI230P2_DAC_FIFO_UNDERRUN_CLEAR (1<<5) /* Clear underrun */ -#define PCI230P2_DAC_FIFO_RESET (1<<12) /* FIFO reset */ +#define PCI230P2_DAC_FIFO_UNDERRUN_CLEAR (1 << 5) /* Clear underrun */ +#define PCI230P2_DAC_FIFO_RESET (1 << 12) /* FIFO reset */ /* * PCI230+ hardware version 2 DAC FIFO levels. @@ -316,44 +316,44 @@ /* * ADCCON read/write values. */ -#define PCI230_ADC_TRIG_NONE (0<<0) /* No trigger */ -#define PCI230_ADC_TRIG_SW (1<<0) /* Software trigger trigger */ -#define PCI230_ADC_TRIG_EXTP (2<<0) /* EXTTRIG +ve edge trigger */ -#define PCI230_ADC_TRIG_EXTN (3<<0) /* EXTTRIG -ve edge trigger */ -#define PCI230_ADC_TRIG_Z2CT0 (4<<0) /* CT0-OUT +ve edge trigger */ -#define PCI230_ADC_TRIG_Z2CT1 (5<<0) /* CT1-OUT +ve edge trigger */ -#define PCI230_ADC_TRIG_Z2CT2 (6<<0) /* CT2-OUT +ve edge trigger */ -#define PCI230_ADC_TRIG_MASK (7<<0) -#define PCI230_ADC_IR_UNI (0<<3) /* Input range unipolar */ -#define PCI230_ADC_IR_BIP (1<<3) /* Input range bipolar */ -#define PCI230_ADC_IR_MASK (1<<3) -#define PCI230_ADC_IM_SE (0<<4) /* Input mode single ended */ -#define PCI230_ADC_IM_DIF (1<<4) /* Input mode differential */ -#define PCI230_ADC_IM_MASK (1<<4) -#define PCI230_ADC_FIFO_EN (1<<8) /* FIFO enable */ -#define PCI230_ADC_INT_FIFO_EMPTY (0<<9) -#define PCI230_ADC_INT_FIFO_NEMPTY (1<<9) /* FIFO interrupt not empty */ -#define PCI230_ADC_INT_FIFO_NHALF (2<<9) -#define PCI230_ADC_INT_FIFO_HALF (3<<9) /* FIFO interrupt half full */ -#define PCI230_ADC_INT_FIFO_NFULL (4<<9) -#define PCI230_ADC_INT_FIFO_FULL (5<<9) /* FIFO interrupt full */ -#define PCI230P_ADC_INT_FIFO_THRESH (7<<9) /* FIFO interrupt threshold */ -#define PCI230_ADC_INT_FIFO_MASK (7<<9) +#define PCI230_ADC_TRIG_NONE (0 << 0) /* No trigger */ +#define PCI230_ADC_TRIG_SW (1 << 0) /* Software trigger trigger */ +#define PCI230_ADC_TRIG_EXTP (2 << 0) /* EXTTRIG +ve edge trigger */ +#define PCI230_ADC_TRIG_EXTN (3 << 0) /* EXTTRIG -ve edge trigger */ +#define PCI230_ADC_TRIG_Z2CT0 (4 << 0) /* CT0-OUT +ve edge trigger */ +#define PCI230_ADC_TRIG_Z2CT1 (5 << 0) /* CT1-OUT +ve edge trigger */ +#define PCI230_ADC_TRIG_Z2CT2 (6 << 0) /* CT2-OUT +ve edge trigger */ +#define PCI230_ADC_TRIG_MASK (7 << 0) +#define PCI230_ADC_IR_UNI (0 << 3) /* Input range unipolar */ +#define PCI230_ADC_IR_BIP (1 << 3) /* Input range bipolar */ +#define PCI230_ADC_IR_MASK (1 << 3) +#define PCI230_ADC_IM_SE (0 << 4) /* Input mode single ended */ +#define PCI230_ADC_IM_DIF (1 << 4) /* Input mode differential */ +#define PCI230_ADC_IM_MASK (1 << 4) +#define PCI230_ADC_FIFO_EN (1 << 8) /* FIFO enable */ +#define PCI230_ADC_INT_FIFO_EMPTY (0 << 9) +#define PCI230_ADC_INT_FIFO_NEMPTY (1 << 9) /* FIFO interrupt not empty */ +#define PCI230_ADC_INT_FIFO_NHALF (2 << 9) +#define PCI230_ADC_INT_FIFO_HALF (3 << 9) /* FIFO interrupt half full */ +#define PCI230_ADC_INT_FIFO_NFULL (4 << 9) +#define PCI230_ADC_INT_FIFO_FULL (5 << 9) /* FIFO interrupt full */ +#define PCI230P_ADC_INT_FIFO_THRESH (7 << 9) /* FIFO interrupt threshold */ +#define PCI230_ADC_INT_FIFO_MASK (7 << 9) /* * ADCCON write-only, transient values. */ -#define PCI230_ADC_FIFO_RESET (1<<12) /* FIFO reset */ -#define PCI230_ADC_GLOB_RESET (1<<13) /* Global reset */ +#define PCI230_ADC_FIFO_RESET (1 << 12) /* FIFO reset */ +#define PCI230_ADC_GLOB_RESET (1 << 13) /* Global reset */ /* * ADCCON read-only values. */ -#define PCI230_ADC_BUSY (1<<15) /* ADC busy */ -#define PCI230_ADC_FIFO_EMPTY (1<<12) /* FIFO empty */ -#define PCI230_ADC_FIFO_FULL (1<<13) /* FIFO full */ -#define PCI230_ADC_FIFO_HALF (1<<14) /* FIFO half full */ -#define PCI230_ADC_FIFO_FULL_LATCHED (1<<5) /* Indicates overrun occurred */ +#define PCI230_ADC_BUSY (1 << 15) /* ADC busy */ +#define PCI230_ADC_FIFO_EMPTY (1 << 12) /* FIFO empty */ +#define PCI230_ADC_FIFO_FULL (1 << 13) /* FIFO full */ +#define PCI230_ADC_FIFO_HALF (1 << 14) /* FIFO half full */ +#define PCI230_ADC_FIFO_FULL_LATCHED (1 << 5) /* FIFO overrun occurred */ /* * PCI230 ADC FIFO levels. @@ -365,10 +365,10 @@ * PCI230+ EXTFUNC values. */ /* Route EXTTRIG pin to external gate inputs. */ -#define PCI230P_EXTFUNC_GAT_EXTTRIG (1<<0) +#define PCI230P_EXTFUNC_GAT_EXTTRIG (1 << 0) /* PCI230+ hardware version 2 values. */ /* Allow DAC FIFO to be enabled. */ -#define PCI230P2_EXTFUNC_DACFIFO (1<<1) +#define PCI230P2_EXTFUNC_DACFIFO (1 << 1) /* * Counter/timer clock input configuration sources. @@ -416,12 +416,12 @@ * Interrupt enables/status register values. */ #define PCI230_INT_DISABLE 0 -#define PCI230_INT_PPI_C0 (1<<0) -#define PCI230_INT_PPI_C3 (1<<1) -#define PCI230_INT_ADC (1<<2) -#define PCI230_INT_ZCLK_CT1 (1<<5) +#define PCI230_INT_PPI_C0 (1 << 0) +#define PCI230_INT_PPI_C3 (1 << 1) +#define PCI230_INT_ADC (1 << 2) +#define PCI230_INT_ZCLK_CT1 (1 << 5) /* For PCI230+ hardware version 2 when DAC FIFO enabled. */ -#define PCI230P2_INT_DAC (1<<4) +#define PCI230P2_INT_DAC (1 << 4) /* * (Potentially) shared resources and their owners