From: Sebastian Andrzej Siewior Date: Thu, 10 Nov 2016 17:44:46 +0000 (+0100) Subject: x86/mcheck: Move CPU_ONLINE and CPU_DOWN_PREPARE to hotplug state machine X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8c0eeac819c85e4c1143f7a874d87b4594739208;p=linux-beck.git x86/mcheck: Move CPU_ONLINE and CPU_DOWN_PREPARE to hotplug state machine The CPU_ONLINE and CPU_DOWN_PREPARE look fully symmetrical and could be move to the hotplug state machine. On a failure during registration we have the tear down callback invoked (mce_cpu_pre_down()) so there should be no timer around and so no need to need keep notifier installed (this was the reason according to the comment why the notifier was registered despite of errors). Signed-off-by: Sebastian Andrzej Siewior Acked-by: Borislav Petkov Cc: Tony Luck Cc: rt@linutronix.de Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/20161110174447.11848-7-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner --- diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index a524faa51400..78955f501ff2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -2511,21 +2511,8 @@ static int mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct timer_list *t = &per_cpu(mce_timer, cpu); switch (action & ~CPU_TASKS_FROZEN) { - case CPU_ONLINE: - case CPU_DOWN_FAILED: - - mce_device_create(cpu); - - if (mce_threshold_create_device(cpu)) { - mce_device_remove(cpu); - return NOTIFY_BAD; - } - mce_reenable_cpu(); - mce_start_timer(cpu, t); - break; case CPU_DEAD: mce_intel_hcpu_update(cpu); @@ -2534,17 +2521,41 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) cmci_rediscover(); break; case CPU_DOWN_PREPARE: - mce_disable_cpu(); - del_timer_sync(t); - mce_threshold_remove_device(cpu); - mce_device_remove(cpu); break; } return NOTIFY_OK; } +static int mce_cpu_online(unsigned int cpu) +{ + struct timer_list *t = &per_cpu(mce_timer, cpu); + int ret; + + mce_device_create(cpu); + + ret = mce_threshold_create_device(cpu); + if (ret) { + mce_device_remove(cpu); + return ret; + } + mce_reenable_cpu(); + mce_start_timer(cpu, t); + return 0; +} + +static int mce_cpu_pre_down(unsigned int cpu) +{ + struct timer_list *t = &per_cpu(mce_timer, cpu); + + mce_disable_cpu(); + del_timer_sync(t); + mce_threshold_remove_device(cpu); + mce_device_remove(cpu); + return 0; +} + static struct notifier_block mce_cpu_notifier = { .notifier_call = mce_cpu_callback, }; @@ -2569,8 +2580,8 @@ static __init void mce_init_banks(void) static __init int mcheck_init_device(void) { + enum cpuhp_state hp_online; int err; - int i = 0; if (!mce_available(&boot_cpu_data)) { err = -EIO; @@ -2588,21 +2599,13 @@ static __init int mcheck_init_device(void) if (err) goto err_out_mem; - cpu_notifier_register_begin(); - for_each_online_cpu(i) { - err = mce_device_create(i); - if (err) { - /* - * Register notifier anyway (and do not unreg it) so - * that we don't leave undeleted timers, see notifier - * callback above. - */ - __register_hotcpu_notifier(&mce_cpu_notifier); - cpu_notifier_register_done(); - goto err_device_create; - } - } + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/mce:online", + mce_cpu_online, mce_cpu_pre_down); + if (err < 0) + goto err_out_mem; + hp_online = err; + cpu_notifier_register_begin(); __register_hotcpu_notifier(&mce_cpu_notifier); cpu_notifier_register_done(); @@ -2617,16 +2620,7 @@ static __init int mcheck_init_device(void) err_register: unregister_syscore_ops(&mce_syscore_ops); - -err_device_create: - /* - * We didn't keep track of which devices were created above, but - * even if we had, the set of online cpus might have changed. - * Play safe and remove for every possible cpu, since - * mce_device_remove() will do the right thing. - */ - for_each_possible_cpu(i) - mce_device_remove(i); + cpuhp_remove_state(hp_online); err_out_mem: free_cpumask_var(mce_device_initialized);