From: Michal Kazior Date: Tue, 16 Jul 2013 07:38:50 +0000 (+0200) Subject: ath10k: decouple pci start/stop logic X-Git-Tag: next-20130805~64^2^2~17 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8c5c53682f0da87b91ff87d060a5d92df524c13d;p=karo-tx-linux.git ath10k: decouple pci start/stop logic Split logic that prepares the device for BMI phase/cleans up related resources. This is necessary for ath10k to be able to restart hw on the fly without reloading the module. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h index 010e26528f35..00d29402fa1d 100644 --- a/drivers/net/wireless/ath/ath10k/hif.h +++ b/drivers/net/wireless/ath/ath10k/hif.h @@ -46,8 +46,11 @@ struct ath10k_hif_ops { void *request, u32 request_len, void *response, u32 *response_len); + /* Post BMI phase, after FW is loaded. Starts regular operation */ int (*start)(struct ath10k *ar); + /* Clean up what start() did. This does not revert to BMI phase. If + * desired so, call power_down() and power_up() */ void (*stop)(struct ath10k *ar); int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id, @@ -70,6 +73,13 @@ struct ath10k_hif_ops { struct ath10k_hif_cb *callbacks); u16 (*get_free_queue_number)(struct ath10k *ar, u8 pipe_id); + + /* Power up the device and enter BMI transfer mode for FW download */ + int (*power_up)(struct ath10k *ar); + + /* Power down the device and free up resources. stop() must be called + * before this if start() was called earlier */ + void (*power_down)(struct ath10k *ar); }; @@ -134,4 +144,14 @@ static inline u16 ath10k_hif_get_free_queue_number(struct ath10k *ar, return ar->hif.ops->get_free_queue_number(ar, pipe_id); } +static inline int ath10k_hif_power_up(struct ath10k *ar) +{ + return ar->hif.ops->power_up(ar); +} + +static inline void ath10k_hif_power_down(struct ath10k *ar) +{ + ar->hif.ops->power_down(ar); +} + #endif /* _HIF_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 7da09832b9d1..c15b0c58cc87 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -54,6 +54,8 @@ static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info, int num); static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info); static void ath10k_pci_stop_ce(struct ath10k *ar); +static void ath10k_pci_device_reset(struct ath10k *ar); +static int ath10k_pci_reset_target(struct ath10k *ar); static const struct ce_attr host_ce_config_wlan[] = { /* host->target HTC control and raw streams */ @@ -1734,6 +1736,66 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar) ath10k_pci_sleep(ar); } +static int ath10k_pci_hif_power_up(struct ath10k *ar) +{ + int ret; + + /* + * Bring the target up cleanly. + * + * The target may be in an undefined state with an AUX-powered Target + * and a Host in WoW mode. If the Host crashes, loses power, or is + * restarted (without unloading the driver) then the Target is left + * (aux) powered and running. On a subsequent driver load, the Target + * is in an unexpected state. We try to catch that here in order to + * reset the Target and retry the probe. + */ + ath10k_pci_device_reset(ar); + + ret = ath10k_pci_reset_target(ar); + if (ret) + goto err; + + if (ath10k_target_ps) { + ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n"); + } else { + /* Force AWAKE forever */ + ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n"); + ath10k_do_pci_wake(ar); + } + + ret = ath10k_pci_ce_init(ar); + if (ret) + goto err_ps; + + ret = ath10k_pci_init_config(ar); + if (ret) + goto err_ce; + + ret = ath10k_pci_wake_target_cpu(ar); + if (ret) { + ath10k_err("could not wake up target CPU (%d)\n", ret); + goto err_ce; + } + + return 0; + +err_ce: + ath10k_pci_ce_deinit(ar); +err_ps: + if (!ath10k_target_ps) + ath10k_do_pci_sleep(ar); +err: + return ret; +} + +static void ath10k_pci_hif_power_down(struct ath10k *ar) +{ + ath10k_pci_ce_deinit(ar); + if (!ath10k_target_ps) + ath10k_do_pci_sleep(ar); +} + static const struct ath10k_hif_ops ath10k_pci_hif_ops = { .send_head = ath10k_pci_hif_send_head, .exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg, @@ -1744,6 +1806,8 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = { .send_complete_check = ath10k_pci_hif_send_complete_check, .set_callbacks = ath10k_pci_hif_set_callbacks, .get_free_queue_number = ath10k_pci_hif_get_free_queue_number, + .power_up = ath10k_pci_hif_power_up, + .power_down = ath10k_pci_hif_power_down, }; static void ath10k_pci_ce_tasklet(unsigned long ptr) @@ -2245,54 +2309,22 @@ static int ath10k_pci_probe(struct pci_dev *pdev, goto err_iomap; } - /* - * Bring the target up cleanly. - * - * The target may be in an undefined state with an AUX-powered Target - * and a Host in WoW mode. If the Host crashes, loses power, or is - * restarted (without unloading the driver) then the Target is left - * (aux) powered and running. On a subsequent driver load, the Target - * is in an unexpected state. We try to catch that here in order to - * reset the Target and retry the probe. - */ - ath10k_pci_device_reset(ar); - - ret = ath10k_pci_reset_target(ar); - if (ret) - goto err_intr; - - if (ath10k_target_ps) { - ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n"); - } else { - /* Force AWAKE forever */ - ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n"); - ath10k_do_pci_wake(ar); - } - - ret = ath10k_pci_ce_init(ar); - if (ret) - goto err_intr; - - ret = ath10k_pci_init_config(ar); - if (ret) - goto err_ce; - - ret = ath10k_pci_wake_target_cpu(ar); + ret = ath10k_pci_hif_power_up(ar); if (ret) { - ath10k_err("could not wake up target CPU (%d)\n", ret); - goto err_ce; + ath10k_err("could not start pci hif (%d)\n", ret); + goto err_intr; } ret = ath10k_core_register(ar); if (ret) { ath10k_err("could not register driver core (%d)\n", ret); - goto err_ce; + goto err_hif; } return 0; -err_ce: - ath10k_pci_ce_deinit(ar); +err_hif: + ath10k_pci_hif_power_down(ar); err_intr: ath10k_pci_stop_intr(ar); err_iomap: @@ -2331,7 +2363,7 @@ static void ath10k_pci_remove(struct pci_dev *pdev) tasklet_kill(&ar_pci->msi_fw_err); ath10k_core_unregister(ar); - ath10k_pci_ce_deinit(ar); + ath10k_pci_hif_power_down(ar); ath10k_pci_stop_intr(ar); pci_set_drvdata(pdev, NULL);