From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Tue, 17 Dec 2013 01:12:57 +0000 (-0700)
Subject: ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8c766cb4d48662efe655241cede0382360a891c0;p=linux-beck.git

ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk

Explicitly sets the pad GPIO_0 (sys_mclk) to 0x030b0.

Before this patch, it has the value 0x130b0 if using mainline u-boot.
So this patch also removes hysteresis. The 100k pulldown remains so
that a disabled clock will be low.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index bbc05830c431..32dd77fbe09f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,8 @@
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
 			>;
 		};