From: Stephen Hemminger Date: Fri, 9 Dec 2005 19:35:07 +0000 (-0800) Subject: [PATCH] sky2: handle tx timeout X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8cc048e338ad4034255f3ff72ef1f631963e1263;p=linux-beck.git [PATCH] sky2: handle tx timeout Put more logic in to try and handle transmit timeout recovery. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0b82dbba16cf..e1733aa17790 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -661,7 +661,7 @@ static void sky2_qset(struct sky2_hw *hw, u16 q) /* Setup prefetch unit registers. This is the interface between * hardware and driver list elements */ -static inline void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, +static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, u64 addr, u32 last) { sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); @@ -1558,14 +1558,25 @@ out: static void sky2_tx_timeout(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned txq = txqaddr[sky2->port]; if (netif_msg_timer(sky2)) printk(KERN_ERR PFX "%s: tx timeout\n", dev->name); - sky2_write32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR), BMU_STOP); - sky2_read32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR)); + netif_stop_queue(dev); + + sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); + sky2_read32(hw, Q_ADDR(txq, Q_CSR)); + + sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); sky2_tx_clean(sky2); + + sky2_qset(hw, txq); + sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); + + netif_wake_queue(dev); }