From: Thor Thayer <tthayer@opensource.altera.com>
Date: Thu, 22 Sep 2016 19:56:16 +0000 (-0500)
Subject: serial: 8250: Set Altera 16550 TX FIFO Threshold
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8e5470c9839caff94fe334e67ff7e7ace587282a;p=linux-beck.git

serial: 8250: Set Altera 16550 TX FIFO Threshold

The Altera 16550 soft IP UART requires 2 additional registers for
TX FIFO threshold support. These 2 registers enable the TX FIFO
Low Watermark and set the TX FIFO Low Watermark.
Set the TX FIFO threshold to the FIFO size - tx_loadsz.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 28d29fac1973..1bfb6fdbaa20 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1870,6 +1870,30 @@ static int exar_handle_irq(struct uart_port *port)
 	return ret;
 }
 
+/*
+ * Newer 16550 compatible parts such as the SC16C650 & Altera 16550 Soft IP
+ * have a programmable TX threshold that triggers the THRE interrupt in
+ * the IIR register. In this case, the THRE interrupt indicates the FIFO
+ * has space available. Load it up with tx_loadsz bytes.
+ */
+static int serial8250_tx_threshold_handle_irq(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned int iir = serial_port_in(port, UART_IIR);
+
+	/* TX Threshold IRQ triggered so load up FIFO */
+	if ((iir & UART_IIR_ID) == UART_IIR_THRI) {
+		struct uart_8250_port *up = up_to_u8250p(port);
+
+		spin_lock_irqsave(&port->lock, flags);
+		serial8250_tx_chars(up);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	iir = serial_port_in(port, UART_IIR);
+	return serial8250_handle_irq(port, iir);
+}
+
 static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
@@ -2159,6 +2183,25 @@ int serial8250_do_startup(struct uart_port *port)
 		serial_port_out(port, UART_LCR, 0);
 	}
 
+	/*
+	 * For the Altera 16550 variants, set TX threshold trigger level.
+	 */
+	if (((port->type == PORT_ALTR_16550_F32) ||
+	     (port->type == PORT_ALTR_16550_F64) ||
+	     (port->type == PORT_ALTR_16550_F128)) && (port->fifosize > 1)) {
+		/* Bounds checking of TX threshold (valid 0 to fifosize-2) */
+		if ((up->tx_loadsz < 2) || (up->tx_loadsz > port->fifosize)) {
+			pr_err("ttyS%d TX FIFO Threshold errors, skipping\n",
+			       serial_index(port));
+		} else {
+			serial_port_out(port, UART_ALTR_AFR,
+					UART_ALTR_EN_TXFIFO_LW);
+			serial_port_out(port, UART_ALTR_TX_LOW,
+					port->fifosize - up->tx_loadsz);
+			port->handle_irq = serial8250_tx_threshold_handle_irq;
+		}
+	}
+
 	if (port->irq) {
 		unsigned char iir1;
 		/*
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e776da..b4c04842a8c0 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -376,5 +376,13 @@
 #define UART_EXAR_TXTRG		0x0a	/* Tx FIFO trigger level write-only */
 #define UART_EXAR_RXTRG		0x0b	/* Rx FIFO trigger level write-only */
 
+/*
+ * These are definitions for the Altera ALTR_16550_F32/F64/F128
+ * Normalized from 0x100 to 0x40 because of shift by 2 (32 bit regs).
+ */
+#define UART_ALTR_AFR		0x40	/* Additional Features Register */
+#define UART_ALTR_EN_TXFIFO_LW	0x01	/* Enable the TX FIFO Low Watermark */
+#define UART_ALTR_TX_LOW	0x41	/* Tx FIFO Low Watermark */
+
 #endif /* _LINUX_SERIAL_REG_H */