From: Tin Huynh Date: Wed, 14 Dec 2016 09:23:58 +0000 (+0700) Subject: i2c: designware: fix wrong Tx/Rx FIFO for ACPI X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8e598769c55dd6c442a1c6cbd21e7abda2a52215;p=linux-beck.git i2c: designware: fix wrong Tx/Rx FIFO for ACPI ACPI always sets Tx/Rx FIFO to 32. This configuration will cause problem if the IP core supports a FIFO size of less than 32. The driver should read the FIFO size from the IP and select the smaller one of the two. Signed-off-by: Tin Huynh Acked-by: Jarkko Nikula Reviewed-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 08153ea4d848..6ce431323125 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -150,6 +150,29 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) return 0; } +static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id) +{ + u32 param, tx_fifo_depth, rx_fifo_depth; + + /* + * Try to detect the FIFO depth if not set by interface driver, + * the depth could be from 2 to 256 from HW spec. + */ + param = i2c_dw_read_comp_param(dev); + tx_fifo_depth = ((param >> 16) & 0xff) + 1; + rx_fifo_depth = ((param >> 8) & 0xff) + 1; + if (!dev->tx_fifo_depth) { + dev->tx_fifo_depth = tx_fifo_depth; + dev->rx_fifo_depth = rx_fifo_depth; + dev->adapter.nr = id; + } else if (tx_fifo_depth >= 2) { + dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth, + tx_fifo_depth); + dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth, + rx_fifo_depth); + } +} + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -245,13 +268,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) 1000000); } - if (!dev->tx_fifo_depth) { - u32 param1 = i2c_dw_read_comp_param(dev); - - dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; - dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; - dev->adapter.nr = pdev->id; - } + dw_i2c_set_fifo_size(dev, pdev->id); adap = &dev->adapter; adap->owner = THIS_MODULE;